Re: Treiber =?ISO-8859-1?Q?f=FCr_D-Link_DFE580TX?=

[Andreas Behnert]

Wenninger, Rainer wrote:

Hallo,
gibt es einen Treiber, der mit der DFE-580TX Quad Karte von D-Link
compatibel ist? Bei der bisher ben�tzten DFE-570TX war ja DEC tulip mit
dem Chipset auf der Karte compatibel .

Was sagt denn 'lspci -v' eines aktuellen Kernels?

Aus dem Linux-Treiber den es bei D-Link zum Download gibt:

~~~snip~~~
/* sundance.c: A Linux device driver for the Sundance ST201 "Alta". */
/*
Written 1999-2000 by Donald Becker.

This software may be used and distributed according to the terms of
the GNU General Public License (GPL), incorporated herein by reference.
Drivers based on or derived from this code fall under the GPL and must
retain the authorship, copyright and license notice. This file is not
a complete program and may only be used when the entire operating
system is licensed under the GPL.

The author may be reached as [EMAIL PROTECTED], or C/O
Scyld Computing Corporation
410 Severn Ave., Suite 210
Annapolis MD 21403

Support and updates available at
http://www.scyld.com/network/sundance.html


Version LK1.01a (jgarzik):
- Replace some MII-related magic numbers with constants

Version LK1.02 (D-Link):
- Add new board to PCI ID list
- Fix multicast bug

Version LK1.03 (D-Link):
- New Rx scheme, reduce Rx congestion
- Option to disable flow control

Version LK1.04 (D-Link):
- Tx timeout recovery
- More support for ethtool.

Version LK1.04a:
- Remove unused/constant members from struct pci_id_info
(which then allows removal of 'drv_flags' from private struct)
(jgarzik)
- If no phy is found, fail to load that board (jgarzik)
- Always start phy id scan at id 1 to avoid problems (Donald Becker)
- Autodetect where mii_preable_required is needed,
default to not needed. (Donald Becker)

Version LK1.04b:
- Remove mii_preamble_required module parameter (Donald Becker)
- Add per-interface mii_preamble_required (setting is autodetected)
(Donald Becker)
- Remove unnecessary cast from void pointer (jgarzik)
- Re-align comments in private struct (jgarzik)

Version LK1.04c (jgarzik):
- Support bitmapped message levels (NETIF_MSG_xxx), and the
two ethtool ioctls that get/set them
- Don't hand-code MII ethtool support, use standard API/lib

Version LK1.04d:
- Merge from Donald Becker's sundance.c: (Jason Lunz)
* proper support for variably-sized MTUs
* default to PIO, to fix chip bugs
- Add missing unregister_netdev (Jason Lunz)
- Add CONFIG_SUNDANCE_MMIO config option (jgarzik)
- Better rx buf size calculation (Donald Becker)

Version LK1.05 (D-Link):
- Fix DFE-580TX packet drop issue (for DL10050C)
- Fix reset_tx logic

Version LK1.06 (D-Link):
- Fix crash while unloading driver

Versin LK1.06b (D-Link):
- New tx scheme, adaptive tx_coalesce

*/

#define DRV_NAME "sundance"
#define DRV_VERSION "1.01+LK1.06b"
#define DRV_RELDATE "6-Nov-2002"
~~~snip~~~




Und die DFE-570TX gibt es nicht mehr???

Gru�,
ab




--
To err is human; effective mayhem requires the root password!
--


--
H�ufig gestellte Fragen und Antworten (FAQ): http://www.de.debian.org/debian-user-german-FAQ/

Zum AUSTRAGEN schicken Sie eine Mail an [EMAIL PROTECTED]
mit dem Subject "unsubscribe". Probleme? Mail an [EMAIL PROTECTED] (engl)