On Fri, 13 Dec 2002 13:55:09 +0100, you wrote: Hallo Liste, noch ein Vergleich beider Systeme.
Mandrake: Dec 13 04:00:27 tiltin2 kernel: ISDN subsystem Rev: 1.1.4.1/1.1.4.1/1.1.4.1/1.1.4.1/1.1.4.1/1.1.4.1 loaded Dec 13 04:00:27 tiltin2 kernel: HiSax: Linux Driver for passive ISDN cards Dec 13 04:00:27 tiltin2 kernel: HiSax: Version 3.5 (module) Dec 13 04:00:27 tiltin2 kernel: HiSax: Layer1 Revision 1.1.4.1 Dec 13 04:00:27 tiltin2 kernel: HiSax: Layer2 Revision 1.1.4.1 Dec 13 04:00:27 tiltin2 kernel: HiSax: TeiMgr Revision 1.1.4.1 Dec 13 04:00:27 tiltin2 kernel: HiSax: Layer3 Revision 1.1.4.1 Dec 13 04:00:27 tiltin2 kernel: HiSax: LinkLayer Revision 1.1.4.1 Dec 13 04:00:27 tiltin2 kernel: HiSax: Approval certification valid Dec 13 04:00:27 tiltin2 kernel: HiSax: Approved with ELSA Microlink PCI cards Dec 13 04:00:27 tiltin2 kernel: HiSax: Approved with Eicon Technology Diva 2.01 PCI cards Dec 13 04:00:27 tiltin2 kernel: HiSax: Approved with Sedlbauer Speedfax + cards Dec 13 04:00:27 tiltin2 kernel: HiSax: Approved with HFC-S PCI A based cards Dec 13 04:00:27 tiltin2 kernel: HiSax: Card 1 Protocol EDSS1 Id=HiSax (0) Dec 13 04:00:27 tiltin2 kernel: HiSax: AVM PCI driver Rev. 1.1.4.1 Dec 13 04:00:27 tiltin2 kernel: PCI: Found IRQ 5 for device 00:0d.0 Dec 13 04:00:27 tiltin2 kernel: AVM PCI: stat 0x2020a Dec 13 04:00:27 tiltin2 kernel: AVM PCI: Class A Rev 2 Dec 13 04:00:27 tiltin2 kernel: HiSax: AVM Fritz!PCI config irq:5 base:0xD800 Dec 13 04:00:27 tiltin2 kernel: AVM PCI: ISAC version (0): 2086/2186 V1.1 Dec 13 04:00:27 tiltin2 kernel: AVM Fritz PnP/PCI: IRQ 5 count 0 Dec 13 04:00:27 tiltin2 kernel: AVM Fritz PnP/PCI: IRQ 5 count 5 Dec 13 04:00:27 tiltin2 kernel: HiSax: DSS1 Rev. 1.1.4.1 Dec 13 04:00:27 tiltin2 kernel: HiSax: 2 channels added Dec 13 04:00:27 tiltin2 kernel: HiSax: MAX_WAITING_CALLS added Dec 13 04:00:27 tiltin2 ipppd[12174]: Found 2 devices: /dev/ippp0, /dev/ippp0 Dec 13 04:00:27 tiltin2 ipppd[12175]: ipppd i2.2.11 (isdn4linux version of pppd by MH) started Dec 13 04:00:27 tiltin2 ipppd[12175]: init_unit: 0 Dec 13 04:00:27 tiltin2 ipppd[12175]: Connect[0]: /dev/ippp0, fd: 12 Dec 13 04:00:27 tiltin2 ipppd[12175]: init_unit: 1 Dec 13 04:00:27 tiltin2 ipppd[12175]: Connect[1]: /dev/ippp0, fd: 13 Dec 13 04:00:28 tiltin2 kernel: ippp0: dialing 1 00191011... Dec 13 04:00:30 tiltin2 ipppd[12175]: Local number: 42, Remote number: 00191011, Type: outgoing Dec 13 04:00:30 tiltin2 ipppd[12175]: PHASE_WAIT -> PHASE_ESTABLISHED, ifunit: 0, linkunit: 0, fd: 12 Dec 13 04:00:30 tiltin2 kernel: isdn_net: ippp0 connected Dec 13 04:00:30 tiltin2 ipppd[12175]: ioctl(SIOCSIFMTU): Invalid argument, 11 ippp0 1524. Dec 13 04:00:31 tiltin2 ipppd[12175]: Remote message: Dec 13 04:00:31 tiltin2 ipppd[12175]: MPPP negotiation, He: No We: No Dec 13 04:00:31 tiltin2 ipppd[12175]: CCP enabled! Trying CCP. Dec 13 04:00:31 tiltin2 ipppd[12175]: CCP: got ccp-unit 0 for link 0 (protocol: 0x80fd) Dec 13 04:00:31 tiltin2 ipppd[12175]: ccp_resetci! Dec 13 04:00:31 tiltin2 last message repeated 2 times Dec 13 04:00:31 tiltin2 ipppd[12175]: local IP address 62.157.45.172 Dec 13 04:00:31 tiltin2 ipppd[12175]: remote IP address 193.158.135.161 Dez 13 04:00:39 tiltin2 net_monitor.real[12122]: launched command: /usr/sbin/logdrake --file=/var/log/messages & Dez 13 04:00:39 tiltin2 logdrake[12237]: ### Program is starting ### Dez 13 04:00:49 tiltin2 net_monitor.real[12122]: launched command: /etc/sysconfig/network-scripts/net_cnx_down & Dec 13 04:00:49 tiltin2 ipppd[12175]: Modem hangup Dec 13 04:00:49 tiltin2 ipppd[12175]: Connection terminated. Dec 13 04:00:49 tiltin2 ipppd[12175]: taking down PHASE_DEAD link 0, linkunit: 0 Dec 13 04:00:49 tiltin2 ipppd[12175]: LCP is down Dec 13 04:00:49 tiltin2 ipppd[12175]: closing fd 12 from unit 0 Dec 13 04:00:49 tiltin2 ipppd[12175]: link 0 closed , linkunit: 0 Dec 13 04:00:49 tiltin2 ipppd[12175]: reinit_unit: 0 Dec 13 04:00:49 tiltin2 ipppd[12175]: Connect[0]: /dev/ippp0, fd: 12 Dec 13 04:00:49 tiltin2 kernel: isdn_net: local hangup ippp0 Woody: NET4: Linux TCP/IP 1.0 for NET4.0 IP Protocols: ICMP, UDP, TCP, IGMP IP: routing cache hash table of 2048 buckets, 16Kbytes TCP: Hash tables configured (established 16384 bind 16384) NET4: Unix domain sockets 1.0/SMP for Linux NET4.0. RAMDISK: Couldn't find valid RAM disk image starting at 0. Freeing initrd memory: 1233k freed kjournald starting. Commit interval 5 seconds EXT3 FS 2.4-0.9.17, 10 Jan 2002 on ide0(3,3), internal journal EXT3-fs: mounted filesystem with ordered data mode. VFS: Mounted root (ext3 filesystem). Freeing unused kernel memory: 280k freed Adding Swap: 240932k swap-space (priority -1) EXT3 FS 2.4-0.9.17, 10 Jan 2002 on ide0(3,3), internal journal CSLIP: code copyright 1989 Regents of the University of California ISDN subsystem Rev: 1.1.4.1/1.1.4.1/1.1.4.1/1.1.4.1/1.1.4.1/1.1.4.1 loaded HiSax: Linux Driver for passive ISDN cards HiSax: Version 3.5 (module) HiSax: Layer1 Revision 1.1.4.1 HiSax: Layer2 Revision 1.1.4.1 HiSax: TeiMgr Revision 1.1.4.1 HiSax: Layer3 Revision 1.1.4.1 HiSax: LinkLayer Revision 1.1.4.1 HiSax: Total 1 card defined HiSax: Card 1 Protocol EDSS1 Id=HiSax (0) HiSax: AVM PCI driver Rev. 1.1.4.1 AVM PnP: Class A Rev 2 AVM PCI/PnP: reset spurious 8259A interrupt: IRQ7. AVM PCI/PnP: S1 0 HiSax: AVM Fritz!PnP config irq:5 base:0xD800 AVM PnP: ISAC version (0): 2086/2186 V1.1 AVM Fritz PnP/PCI: IRQ 5 count 0 AVM Fritz PnP/PCI: IRQ 5 count 3 HiSax: DSS1 Rev. 1.1.4.1 HiSax: 2 channels added HiSax: MAX_WAITING_CALLS added kjournald starting. Commit interval 5 seconds EXT3 FS 2.4-0.9.17, 10 Jan 2002 on ide0(3,1), internal journal EXT3-fs: mounted filesystem with ordered data mode. kjournald starting. Commit interval 5 seconds EXT3 FS 2.4-0.9.17, 10 Jan 2002 on ide0(3,2), internal journal EXT3-fs: mounted filesystem with ordered data mode. kjournald starting. Commit interval 5 seconds EXT3 FS 2.4-0.9.17, 10 Jan 2002 on ide0(3,6), internal journal EXT3-fs: mounted filesystem with ordered data mode. isdn: Verbose-Level is 3 HiSax: debugging flags card 1 set to 4 ippp, open, slot: 0, minor: 0, state: 0000 ippp_ccp: allocated reset data structure ce6cf000 Ist halt mal wieder ein wenig hoffnug.. Gruß Tilo Johannsen [EMAIL PROTECTED] -- Häufig gestellte Fragen und Antworten (FAQ): http://www.de.debian.org/debian-user-german-FAQ/ Zum AUSTRAGEN schicken Sie eine Mail an [EMAIL PROTECTED] mit dem Subject "unsubscribe". Probleme? Mail an [EMAIL PROTECTED] (engl)