Hall�chen, Hast Du schonmal versuch mit der Option
boot: Linux root=/dev/hda2 Am lilo-Prompt zu booten ? Ist nur sone Vermutung, aber wenn der Onboard-IDE-Controller deaktiviert ist, k�nnte ich mir Vorstellen das Deine HDD jetzt �ber /dev/hda angesprochen wird ... Gr��e Kai Am Son, 2003-02-09 um 12.49 schrieb [EMAIL PROTECTED]: > Hi! > > Ich wollte mir einen neuen Kernel compilieren (habe ich auch gemacht) leider > bootet dieser jetzt nicht. Ich hab auch schon nach dem Fehler gesucht, aber > leider nichts gefunden. > > > Mein Rechner: > > Ich habe den on board disc-controller deaktiviert und es ist ein Promise > Ultra 100 TX2 offboard controller eingebaut mit einer 120 GB Maxtor Platte. Mit > dem BF24 Kernel l�uft der Rechner ohne Probleme. > > /dev/hde2 ist meine normale linux parition > /dev/hde1 ist meine swap > > Einsatzgebiet: > Reiner Backup Rechner. Es sind also nur die ben�tigten Hardware Optionen > aktivert. > > Anbei habe ich meine Kernel Config, Die Fehlermeldung beim Booten und mein > Lilo.conf eingef�gt: > > > Folgende Fehlermeldung: > > kmod: failed to exec /sbin/modprobe -s -k block-major-33, errno = 2 > VFS: Cannot open root device "2102" or 21:02 > Please append a correct "root=" boot option > Kernel panic: VFS: Unable to mount root fs on 21:02 > > > Hier meine .config: > > # > # Automatically generated by make menuconfig: don't edit > # > CONFIG_X86=y > # CONFIG_SBUS is not set > CONFIG_UID16=y > > # > # Code maturity level options > # > CONFIG_EXPERIMENTAL=y > > # > # Loadable module support > # > CONFIG_MODULES=y > CONFIG_MODVERSIONS=y > CONFIG_KMOD=y > > # > # Processor type and features > # > # CONFIG_M386 is not set > # CONFIG_M486 is not set > # CONFIG_M586 is not set > CONFIG_M586TSC=y > # CONFIG_M586MMX is not set > # CONFIG_M686 is not set > # CONFIG_MPENTIUMIII is not set > # CONFIG_MPENTIUM4 is not set > # CONFIG_MK6 is not set > # CONFIG_MK7 is not set > # CONFIG_MELAN is not set > # CONFIG_MCRUSOE is not set > # CONFIG_MWINCHIPC6 is not set > # CONFIG_MWINCHIP2 is not set > # CONFIG_MWINCHIP3D is not set > # CONFIG_MCYRIXIII is not set > CONFIG_X86_WP_WORKS_OK=y > CONFIG_X86_INVLPG=y > CONFIG_X86_CMPXCHG=y > CONFIG_X86_XADD=y > CONFIG_X86_BSWAP=y > CONFIG_X86_POPAD_OK=y > # CONFIG_RWSEM_GENERIC_SPINLOCK is not set > CONFIG_RWSEM_XCHGADD_ALGORITHM=y > CONFIG_X86_L1_CACHE_SHIFT=5 > CONFIG_X86_USE_STRING_486=y > CONFIG_X86_ALIGNMENT_16=y > CONFIG_X86_HAS_TSC=y > CONFIG_X86_PPRO_FENCE=y > # CONFIG_X86_F00F_WORKS_OK is not set > CONFIG_X86_MCE=y > # CONFIG_TOSHIBA is not set > # CONFIG_I8K is not set > # CONFIG_MICROCODE is not set > # CONFIG_X86_MSR is not set > # CONFIG_X86_CPUID is not set > CONFIG_NOHIGHMEM=y > # CONFIG_HIGHMEM4G is not set > # CONFIG_HIGHMEM64G is not set > # CONFIG_HIGHMEM is not set > # CONFIG_MATH_EMULATION is not set > # CONFIG_MTRR is not set > # CONFIG_SMP is not set > # CONFIG_X86_UP_APIC is not set > # CONFIG_X86_UP_IOAPIC is not set > # CONFIG_X86_TSC_DISABLE is not set > CONFIG_X86_TSC=y > > # > # General setup > # > CONFIG_NET=y > CONFIG_PCI=y > # CONFIG_PCI_GOBIOS is not set > # CONFIG_PCI_GODIRECT is not set > CONFIG_PCI_GOANY=y > CONFIG_PCI_BIOS=y > CONFIG_PCI_DIRECT=y > # CONFIG_ISA is not set > CONFIG_PCI_NAMES=y > # CONFIG_EISA is not set > # CONFIG_MCA is not set > # CONFIG_HOTPLUG is not set > # CONFIG_PCMCIA is not set > # CONFIG_HOTPLUG_PCI is not set > CONFIG_SYSVIPC=y > CONFIG_BSD_PROCESS_ACCT=y > CONFIG_SYSCTL=y > CONFIG_KCORE_ELF=y > # CONFIG_KCORE_AOUT is not set > CONFIG_BINFMT_AOUT=y > CONFIG_BINFMT_ELF=y > CONFIG_BINFMT_MISC=y > CONFIG_PM=y > # CONFIG_ACPI is not set > CONFIG_APM=y > CONFIG_APM_IGNORE_USER_SUSPEND=y > CONFIG_APM_DO_ENABLE=y > CONFIG_APM_CPU_IDLE=y > CONFIG_APM_DISPLAY_BLANK=y > CONFIG_APM_RTC_IS_GMT=y > CONFIG_APM_ALLOW_INTS=y > CONFIG_APM_REAL_MODE_POWER_OFF=y > > # > # Memory Technology Devices (MTD) > # > # CONFIG_MTD is not set > > # > # Parallel port support > # > # CONFIG_PARPORT is not set > > # > # Plug and Play configuration > # > CONFIG_PNP=y > # CONFIG_ISAPNP is not set > > # > # Block devices > # > CONFIG_BLK_DEV_FD=y > # CONFIG_BLK_DEV_XD is not set > # CONFIG_PARIDE is not set > # CONFIG_BLK_CPQ_DA is not set > # CONFIG_BLK_CPQ_CISS_DA is not set > # CONFIG_CISS_SCSI_TAPE is not set > # CONFIG_BLK_DEV_DAC960 is not set > # CONFIG_BLK_DEV_UMEM is not set > # CONFIG_BLK_DEV_LOOP is not set > # CONFIG_BLK_DEV_NBD is not set > # CONFIG_BLK_DEV_RAM is not set > # CONFIG_BLK_DEV_INITRD is not set > # CONFIG_BLK_STATS is not set > > # > # Multi-device support (RAID and LVM) > # > # CONFIG_MD is not set > # CONFIG_BLK_DEV_MD is not set > # CONFIG_MD_LINEAR is not set > # CONFIG_MD_RAID0 is not set > # CONFIG_MD_RAID1 is not set > # CONFIG_MD_RAID5 is not set > # CONFIG_MD_MULTIPATH is not set > # CONFIG_BLK_DEV_LVM is not set > > # > # Networking options > # > CONFIG_PACKET=y > CONFIG_PACKET_MMAP=y > # CONFIG_NETLINK_DEV is not set > # CONFIG_NETFILTER is not set > # CONFIG_FILTER is not set > CONFIG_UNIX=y > CONFIG_INET=y > # CONFIG_IP_MULTICAST is not set > # CONFIG_IP_ADVANCED_ROUTER is not set > # CONFIG_IP_PNP is not set > # CONFIG_NET_IPIP is not set > # CONFIG_NET_IPGRE is not set > # CONFIG_ARPD is not set > # CONFIG_INET_ECN is not set > # CONFIG_SYN_COOKIES is not set > # CONFIG_IPV6 is not set > # CONFIG_KHTTPD is not set > # CONFIG_ATM is not set > # CONFIG_VLAN_8021Q is not set > # CONFIG_IPX is not set > # CONFIG_ATALK is not set > > # > # Appletalk devices > # > # CONFIG_DEV_APPLETALK is not set > # CONFIG_DECNET is not set > # CONFIG_BRIDGE is not set > # CONFIG_X25 is not set > # CONFIG_LAPB is not set > # CONFIG_LLC is not set > # CONFIG_NET_DIVERT is not set > # CONFIG_ECONET is not set > # CONFIG_WAN_ROUTER is not set > # CONFIG_NET_FASTROUTE is not set > # CONFIG_NET_HW_FLOWCONTROL is not set > > # > # QoS and/or fair queueing > # > # CONFIG_NET_SCHED is not set > > # > # Network testing > # > # CONFIG_NET_PKTGEN is not set > > # > # Telephony Support > # > # CONFIG_PHONE is not set > # CONFIG_PHONE_IXJ is not set > # CONFIG_PHONE_IXJ_PCMCIA is not set > > # > # ATA/IDE/MFM/RLL support > # > CONFIG_IDE=y > > # > # IDE, ATA and ATAPI Block devices > # > CONFIG_BLK_DEV_IDE=y > # CONFIG_BLK_DEV_HD_IDE is not set > # CONFIG_BLK_DEV_HD is not set > CONFIG_BLK_DEV_IDEDISK=y > # CONFIG_IDEDISK_MULTI_MODE is not set > # CONFIG_IDEDISK_STROKE is not set > # CONFIG_BLK_DEV_IDEDISK_VENDOR is not set > # CONFIG_BLK_DEV_IDEDISK_FUJITSU is not set > # CONFIG_BLK_DEV_IDEDISK_IBM is not set > # CONFIG_BLK_DEV_IDEDISK_MAXTOR is not set > # CONFIG_BLK_DEV_IDEDISK_QUANTUM is not set > # CONFIG_BLK_DEV_IDEDISK_SEAGATE is not set > # CONFIG_BLK_DEV_IDEDISK_WD is not set > # CONFIG_BLK_DEV_COMMERIAL is not set > # CONFIG_BLK_DEV_TIVO is not set > # CONFIG_BLK_DEV_IDECS is not set > # CONFIG_BLK_DEV_IDECD is not set > # CONFIG_BLK_DEV_IDETAPE is not set > # CONFIG_BLK_DEV_IDEFLOPPY is not set > # CONFIG_BLK_DEV_IDESCSI is not set > # CONFIG_IDE_TASK_IOCTL is not set > # CONFIG_BLK_DEV_CMD640 is not set > # CONFIG_BLK_DEV_CMD640_ENHANCED is not set > # CONFIG_BLK_DEV_ISAPNP is not set > # CONFIG_BLK_DEV_RZ1000 is not set > CONFIG_BLK_DEV_IDEPCI=y > CONFIG_IDEPCI_SHARE_IRQ=y > CONFIG_BLK_DEV_IDEDMA_PCI=y > CONFIG_BLK_DEV_OFFBOARD=y > # CONFIG_BLK_DEV_IDEDMA_FORCED is not set > CONFIG_IDEDMA_PCI_AUTO=y > # CONFIG_IDEDMA_ONLYDISK is not set > CONFIG_BLK_DEV_IDEDMA=y > # CONFIG_IDEDMA_PCI_WIP is not set > # CONFIG_BLK_DEV_IDEDMA_TIMEOUT is not set > # CONFIG_IDEDMA_NEW_DRIVE_LISTINGS is not set > CONFIG_BLK_DEV_ADMA=y > # CONFIG_BLK_DEV_AEC62XX is not set > # CONFIG_AEC62XX_TUNING is not set > # CONFIG_BLK_DEV_ALI15X3 is not set > # CONFIG_WDC_ALI15X3 is not set > # CONFIG_BLK_DEV_AMD74XX is not set > # CONFIG_AMD74XX_OVERRIDE is not set > # CONFIG_BLK_DEV_CMD64X is not set > # CONFIG_BLK_DEV_CMD680 is not set > # CONFIG_BLK_DEV_CY82C693 is not set > # CONFIG_BLK_DEV_CS5530 is not set > # CONFIG_BLK_DEV_HPT34X is not set > # CONFIG_HPT34X_AUTODMA is not set > # CONFIG_BLK_DEV_HPT366 is not set > CONFIG_BLK_DEV_PIIX=y > CONFIG_PIIX_TUNING=y > # CONFIG_BLK_DEV_NS87415 is not set > # CONFIG_BLK_DEV_OPTI621 is not set > CONFIG_BLK_DEV_PDC202XX=y > CONFIG_PDC202XX_BURST=y > # CONFIG_PDC202XX_FORCE is not set > # CONFIG_BLK_DEV_SVWKS is not set > # CONFIG_BLK_DEV_SIS5513 is not set > # CONFIG_BLK_DEV_SLC90E66 is not set > # CONFIG_BLK_DEV_TRM290 is not set > # CONFIG_BLK_DEV_VIA82CXXX is not set > # CONFIG_IDE_CHIPSETS is not set > CONFIG_IDEDMA_AUTO=y > # CONFIG_IDEDMA_IVB is not set > # CONFIG_DMA_NONPCI is not set > CONFIG_BLK_DEV_IDE_MODES=y > # CONFIG_BLK_DEV_ATARAID is not set > # CONFIG_BLK_DEV_ATARAID_PDC is not set > # CONFIG_BLK_DEV_ATARAID_HPT is not set > > # > # SCSI support > # > # CONFIG_SCSI is not set > > # > # Fusion MPT device support > # > # CONFIG_FUSION is not set > # CONFIG_FUSION_BOOT is not set > # CONFIG_FUSION_ISENSE is not set > # CONFIG_FUSION_CTL is not set > # CONFIG_FUSION_LAN is not set > > # > # IEEE 1394 (FireWire) support (EXPERIMENTAL) > # > # CONFIG_IEEE1394 is not set > > # > # I2O device support > # > # CONFIG_I2O is not set > # CONFIG_I2O_PCI is not set > # CONFIG_I2O_BLOCK is not set > # CONFIG_I2O_LAN is not set > # CONFIG_I2O_SCSI is not set > # CONFIG_I2O_PROC is not set > > # > # Network device support > # > CONFIG_NETDEVICES=y > > # > # ARCnet devices > # > # CONFIG_ARCNET is not set > CONFIG_DUMMY=m > # CONFIG_BONDING is not set > # CONFIG_EQUALIZER is not set > # CONFIG_TUN is not set > # CONFIG_ETHERTAP is not set > > # > # Ethernet (10 or 100Mbit) > # > CONFIG_NET_ETHERNET=y > # CONFIG_SUNLANCE is not set > # CONFIG_HAPPYMEAL is not set > # CONFIG_SUNBMAC is not set > # CONFIG_SUNQE is not set > # CONFIG_SUNGEM is not set > CONFIG_NET_VENDOR_3COM=y > # CONFIG_EL1 is not set > # CONFIG_EL2 is not set > # CONFIG_ELPLUS is not set > # CONFIG_EL16 is not set > # CONFIG_ELMC is not set > # CONFIG_ELMC_II is not set > CONFIG_VORTEX=y > # CONFIG_LANCE is not set > # CONFIG_NET_VENDOR_SMC is not set > # CONFIG_NET_VENDOR_RACAL is not set > # CONFIG_HP100 is not set > # CONFIG_NET_ISA is not set > # CONFIG_NET_PCI is not set > # CONFIG_NET_POCKET is not set > > # > # Ethernet (1000 Mbit) > # > # CONFIG_ACENIC is not set > # CONFIG_DL2K is not set > # CONFIG_E1000 is not set > # CONFIG_MYRI_SBUS is not set > # CONFIG_NS83820 is not set > # CONFIG_HAMACHI is not set > # CONFIG_YELLOWFIN is not set > # CONFIG_SK98LIN is not set > # CONFIG_TIGON3 is not set > # CONFIG_FDDI is not set > # CONFIG_HIPPI is not set > # CONFIG_PLIP is not set > # CONFIG_PPP is not set > # CONFIG_SLIP is not set > > # > # Wireless LAN (non-hamradio) > # > # CONFIG_NET_RADIO is not set > > # > # Token Ring devices > # > # CONFIG_TR is not set > # CONFIG_NET_FC is not set > # CONFIG_RCPCI is not set > # CONFIG_SHAPER is not set > > # > # Wan interfaces > # > # CONFIG_WAN is not set > > # > # Amateur Radio support > # > # CONFIG_HAMRADIO is not set > > # > # IrDA (infrared) support > # > # CONFIG_IRDA is not set > > # > # ISDN subsystem > # > # CONFIG_ISDN is not set > > # > # Input core support > # > # CONFIG_INPUT is not set > # CONFIG_INPUT_KEYBDEV is not set > # CONFIG_INPUT_MOUSEDEV is not set > # CONFIG_INPUT_JOYDEV is not set > # CONFIG_INPUT_EVDEV is not set > > # > # Character devices > # > CONFIG_VT=y > CONFIG_VT_CONSOLE=y > # CONFIG_SERIAL is not set > # CONFIG_SERIAL_EXTENDED is not set > # CONFIG_SERIAL_NONSTANDARD is not set > CONFIG_UNIX98_PTYS=y > CONFIG_UNIX98_PTY_COUNT=256 > > # > # I2C support > # > # CONFIG_I2C is not set > > # > # Mice > # > # CONFIG_BUSMOUSE is not set > CONFIG_MOUSE=y > CONFIG_PSMOUSE=y > # CONFIG_82C710_MOUSE is not set > # CONFIG_PC110_PAD is not set > # CONFIG_MK712_MOUSE is not set > > # > # Joysticks > # > # CONFIG_INPUT_GAMEPORT is not set > # CONFIG_QIC02_TAPE is not set > > # > # Watchdog Cards > # > # CONFIG_WATCHDOG is not set > # CONFIG_AMD_RNG is not set > # CONFIG_INTEL_RNG is not set > # CONFIG_AMD_PM768 is not set > # CONFIG_NVRAM is not set > # CONFIG_RTC is not set > # CONFIG_DTLK is not set > # CONFIG_R3964 is not set > # CONFIG_APPLICOM is not set > # CONFIG_SONYPI is not set > > # > # Ftape, the floppy tape device driver > # > # CONFIG_FTAPE is not set > # CONFIG_AGP is not set > # CONFIG_DRM is not set > # CONFIG_MWAVE is not set > > # > # Multimedia devices > # > # CONFIG_VIDEO_DEV is not set > > # > # File systems > # > # CONFIG_QUOTA is not set > # CONFIG_AUTOFS_FS is not set > CONFIG_AUTOFS4_FS=y > CONFIG_REISERFS_FS=y > CONFIG_REISERFS_CHECK=y > CONFIG_REISERFS_PROC_INFO=y > # CONFIG_ADFS_FS is not set > # CONFIG_ADFS_FS_RW is not set > # CONFIG_AFFS_FS is not set > # CONFIG_HFS_FS is not set > # CONFIG_BEFS_FS is not set > # CONFIG_BEFS_DEBUG is not set > # CONFIG_BFS_FS is not set > # CONFIG_EXT3_FS is not set > # CONFIG_JBD is not set > # CONFIG_JBD_DEBUG is not set > CONFIG_FAT_FS=m > # CONFIG_MSDOS_FS is not set > # CONFIG_UMSDOS_FS is not set > CONFIG_VFAT_FS=m > # CONFIG_EFS_FS is not set > # CONFIG_JFFS_FS is not set > # CONFIG_JFFS2_FS is not set > # CONFIG_CRAMFS is not set > CONFIG_TMPFS=y > CONFIG_RAMFS=y > # CONFIG_ISO9660_FS is not set > # CONFIG_JOLIET is not set > # CONFIG_ZISOFS is not set > # CONFIG_JFS_FS is not set > # CONFIG_JFS_DEBUG is not set > # CONFIG_JFS_STATISTICS is not set > # CONFIG_MINIX_FS is not set > # CONFIG_VXFS_FS is not set > # CONFIG_NTFS_FS is not set > # CONFIG_NTFS_RW is not set > # CONFIG_HPFS_FS is not set > CONFIG_PROC_FS=y > # CONFIG_DEVFS_FS is not set > # CONFIG_DEVFS_MOUNT is not set > # CONFIG_DEVFS_DEBUG is not set > CONFIG_DEVPTS_FS=y > # CONFIG_QNX4FS_FS is not set > # CONFIG_QNX4FS_RW is not set > # CONFIG_ROMFS_FS is not set > CONFIG_EXT2_FS=m > # CONFIG_SYSV_FS is not set > # CONFIG_UDF_FS is not set > # CONFIG_UDF_RW is not set > # CONFIG_UFS_FS is not set > # CONFIG_UFS_FS_WRITE is not set > > # > # Network File Systems > # > # CONFIG_CODA_FS is not set > # CONFIG_INTERMEZZO_FS is not set > CONFIG_NFS_FS=y > CONFIG_NFS_V3=y > # CONFIG_ROOT_NFS is not set > CONFIG_NFSD=y > CONFIG_NFSD_V3=y > # CONFIG_NFSD_TCP is not set > CONFIG_SUNRPC=y > CONFIG_LOCKD=y > CONFIG_LOCKD_V4=y > CONFIG_SMB_FS=m > # CONFIG_SMB_NLS_DEFAULT is not set > # CONFIG_NCP_FS is not set > # CONFIG_NCPFS_PACKET_SIGNING is not set > # CONFIG_NCPFS_IOCTL_LOCKING is not set > # CONFIG_NCPFS_STRONG is not set > # CONFIG_NCPFS_NFS_NS is not set > # CONFIG_NCPFS_OS2_NS is not set > # CONFIG_NCPFS_SMALLDOS is not set > # CONFIG_NCPFS_NLS is not set > # CONFIG_NCPFS_EXTRAS is not set > # CONFIG_ZISOFS_FS is not set > > # > # Partition Types > # > # CONFIG_PARTITION_ADVANCED is not set > CONFIG_MSDOS_PARTITION=y > CONFIG_SMB_NLS=y > CONFIG_NLS=y > > # > # Native Language Support > # > CONFIG_NLS_DEFAULT="iso8859-1" > # CONFIG_NLS_CODEPAGE_437 is not set > # CONFIG_NLS_CODEPAGE_737 is not set > # CONFIG_NLS_CODEPAGE_775 is not set > # CONFIG_NLS_CODEPAGE_850 is not set > # CONFIG_NLS_CODEPAGE_852 is not set > # CONFIG_NLS_CODEPAGE_855 is not set > # CONFIG_NLS_CODEPAGE_857 is not set > # CONFIG_NLS_CODEPAGE_860 is not set > # CONFIG_NLS_CODEPAGE_861 is not set > # CONFIG_NLS_CODEPAGE_862 is not set > # CONFIG_NLS_CODEPAGE_863 is not set > # CONFIG_NLS_CODEPAGE_864 is not set > # CONFIG_NLS_CODEPAGE_865 is not set > # CONFIG_NLS_CODEPAGE_866 is not set > # CONFIG_NLS_CODEPAGE_869 is not set > # CONFIG_NLS_CODEPAGE_936 is not set > # CONFIG_NLS_CODEPAGE_950 is not set > # CONFIG_NLS_CODEPAGE_932 is not set > # CONFIG_NLS_CODEPAGE_949 is not set > # CONFIG_NLS_CODEPAGE_874 is not set > # CONFIG_NLS_ISO8859_8 is not set > # CONFIG_NLS_CODEPAGE_1250 is not set > # CONFIG_NLS_CODEPAGE_1251 is not set > # CONFIG_NLS_ISO8859_1 is not set > # CONFIG_NLS_ISO8859_2 is not set > # CONFIG_NLS_ISO8859_3 is not set > # CONFIG_NLS_ISO8859_4 is not set > # CONFIG_NLS_ISO8859_5 is not set > # CONFIG_NLS_ISO8859_6 is not set > # CONFIG_NLS_ISO8859_7 is not set > # CONFIG_NLS_ISO8859_9 is not set > # CONFIG_NLS_ISO8859_13 is not set > # CONFIG_NLS_ISO8859_14 is not set > # CONFIG_NLS_ISO8859_15 is not set > # CONFIG_NLS_KOI8_R is not set > # CONFIG_NLS_KOI8_U is not set > # CONFIG_NLS_UTF8 is not set > > # > # Console drivers > # > CONFIG_VGA_CONSOLE=y > # CONFIG_VIDEO_SELECT is not set > # CONFIG_MDA_CONSOLE is not set > > # > # Frame-buffer support > # > # CONFIG_FB is not set > > # > # Sound > # > # CONFIG_SOUND is not set > > # > # USB support > # > # CONFIG_USB is not set > > # > # Bluetooth support > # > # CONFIG_BLUEZ is not set > > # > # Kernel hacking > # > # CONFIG_DEBUG_KERNEL is not set > > # > # Library routines > # > # CONFIG_ZLIB_INFLATE is not set > # CONFIG_ZLIB_DEFLATE is not set > > > > > > > > Hier meine lilo.conf > > # /etc/lilo.conf - See: `lilo(8)' and `lilo.conf(5)', > # --------------- `install-mbr(8)', `/usr/share/doc/lilo/', > # and `/usr/share/doc/mbr/'. > > # +---------------------------------------------------------------+ > # | !! Reminder !! | > # | | > # | Don't forget to run `lilo' after you make changes to this | > # | conffile, `/boot/bootmess.txt', or install a new kernel. The | > # | computer will most likely fail to boot if a kernel-image | > # | post-install script or you don't remember to run `lilo'. | > # | | > # +---------------------------------------------------------------+ > > # Support LBA for large hard disks. > # > lba32 > > # Overrides the default mapping between harddisk names and the BIOS' > # harddisk order. Use with caution. > disk=/dev/hde > bios=0x80 > > > # Specifies the boot device. This is where Lilo installs its boot > # block. It can be either a partition, or the raw device, in which > # case it installs in the MBR, and will overwrite the current MBR. > # > boot=/dev/hde > > # Specifies the device that should be mounted as root. (`/') > # > root=/dev/hde2 > > # Enable map compaction: > # Tries to merge read requests for adjacent sectors into a single > # read request. This drastically reduces load time and keeps the > # map smaller. Using `compact' is especially recommended when > # booting from a floppy disk. It is disabled here by default > # because it doesn't always work. > # > # compact > > # Installs the specified file as the new boot sector > # You have the choice between: bmp, compat, menu and text > # Look in /boot/ and in lilo.conf(5) manpage for details > # > install=/boot/boot-menu.b > > # Specifies the location of the map file > # > map=/boot/map > > # You can set a password here, and uncomment the `restricted' lines > # in the image definitions below to make it so that a password must > # be typed to boot anything but a default configuration. If a > # command line is given, other than one specified by an `append' > # statement in `lilo.conf', the password will be required, but a > # standard default boot will not require one. > # > # This will, for instance, prevent anyone with access to the > # console from booting with something like `Linux init=/bin/sh', > # and thus becoming `root' without proper authorization. > # > # Note that if you really need this type of security, you will > # likely also want to use `install-mbr' to reconfigure the MBR > # program, as well as set up your BIOS to disallow booting from > # removable disk or CD-ROM, then put a password on getting into the > # BIOS configuration as well. Please RTFM `install-mbr(8)'. > # > # password=tatercounter2000 > > # Specifies the number of deciseconds (0.1 seconds) LILO should > # wait before booting the first image. > # > delay=20 > > # You can put a customized boot message up if you like. If you use > # `prompt', and this computer may need to reboot unattended, you > # must specify a `timeout', or it will sit there forever waiting > # for a keypress. `single-key' goes with the `alias' lines in the > # `image' configurations below. eg: You can press `1' to boot > # `Linux', `2' to boot `LinuxOLD', if you uncomment the `alias'. > # > # message=/boot/bootmess.txt > # prompt > # single-key > # delay=100 > # timeout=100 > > # Specifies the VGA text mode at boot time. (normal, extended, ask, <mode>) > # > # vga=ask > # vga=9 > # > vga=normal > > # Kernel command line options that apply to all installed images go > # here. See: The `boot-prompt-HOWO' and `kernel-parameters.txt' in > # the Linux kernel `Documentation' directory. > # > # append="" > > # Boot up Linux by default. > # > default=Linux > > image=/vmlinuz > label=Linux > read-only > # restricted > # alias=1 > > image=/vmlinuz.old > label=LinuxOLD > read-only > optional > # restricted > # alias=2 > > # If you have another OS on this machine to boot, you can uncomment the > # following lines, changing the device name on the `other' line to > # where your other OS' partition is. > # > # other=/dev/hda4 > # label=HURD > # restricted > # alias=3 > > > > > > -- > +++ GMX - Mail, Messaging & more http://www.gmx.net +++ > NEU: Mit GMX ins Internet. Rund um die Uhr f�r 1 ct/ Min. surfen! -- Kai Schubert <[EMAIL PROTECTED]> -- Haeufig gestellte Fragen und Antworten (FAQ): http://www.de.debian.org/debian-user-german-FAQ/ Zum AUSTRAGEN schicken Sie eine Mail an [EMAIL PROTECTED] mit dem Subject "unsubscribe". Probleme? Mail an [EMAIL PROTECTED] (engl)
