Hallo Liste, ich wollte heut mal wieder was brennen, doch es ging nicht, obwohl es schon mal funktioniert hat.. Es ist ein externer Brenner der mit USB angeschlossen ist.
ich kann den Brenner weder mounten, noch das Ger�t finden mit cdrecord -scanbus die Ausgabe lautet: Cdrecord 1.11a34 (i686-pc-linux-gnu) Copyright (C) 1995-2002 J�rg Schilling cdrecord: No such file or directory. Cannot open '/dev/pg*'. Cannot open SCSI driver. cdrecord: For possible targets try 'cdrecord -scanbus'. Make sure you are root. cdrecord kann also den SCSI-Treiber nicht �ffnen, aber dmesg sagt mir unter anderem: usb-storage: act_altsettting is 0 usb-storage: id_index calculated to be: 81 usb-storage: Array length appears to be: 83 usb-storage: USB Mass Storage device detected usb-storage: Endpoints: In: 0xc7ed42b4 Out: 0xc7ed42a0 Int: 0xc7ed42c8 (Period 3 2) usb-storage: New GUID 07abfc03100f0150040eed09 usb-storage: GetMaxLUN command result is 1, data is 0 usb-storage: Transport: Bulk usb-storage: Protocol: Transparent SCSI usb-storage: *** thread sleeping. scsi0 : SCSI emulation for USB Mass Storage devices usb-storage: queuecommand() called usb-storage: *** thread awakened. usb-storage: Command INQUIRY (6 bytes) usb-storage: 12 00 00 00 ff 00 00 00 75 5a 1c c0 usb-storage: Bulk command S 0x43425355 T 0x1 Trg 0 LUN 0 L 255 F 128 CL 6 usb-storage: Bulk command transfer result=0 usb-storage: usb_stor_transfer_partial(): xfer 255 bytes usb-storage: command_abort() called usb-storage: usb_stor_bulk_msg() returned -2 xferred 0/255 usb-storage: usb_stor_transfer_partial(): transfer aborted usb-storage: Bulk data transfer result 0x3 usb-storage: -- transport indicates command was aborted usb-storage: Fixing INQUIRY data to show SCSI rev 2 usb-storage: scsi command aborted usb-storage: *** thread sleeping. usb-storage: queuecommand() called usb-storage: *** thread awakened. usb-storage: Command TEST_UNIT_READY (6 bytes) usb-storage: 00 00 00 00 00 00 00 00 75 5a 1c c0 usb-storage: Bulk command S 0x43425355 T 0x1 Trg 0 LUN 0 L 0 F 0 CL 6 usb-storage: Bulk command transfer result=0 usb-storage: Attempting to get CSW... usb-storage: Bulk status result = 0 usb-storage: Bulk status Sig 0x10 T 0x2 R 1 Stat 0x93 usb-storage: Bulk logical error usb-storage: Bulk reset requested usb-storage: command_abort() called usb-storage: -- nothing to abort usb-storage: device_reset() called usb-storage: Bulk reset requested usb-storage: Bulk soft reset completed usb-storage: -- transport indicates transport failure usb-storage: Fixing INQUIRY data to show SCSI rev 2 usb-storage: scsi cmd done, result=0x70000 usb-storage: *** thread sleeping. usb-storage: Bulk soft reset completed usb-storage: queuecommand() called usb-storage: *** thread awakened. usb-storage: Command TEST_UNIT_READY (6 bytes) usb-storage: 00 00 00 00 00 00 00 00 75 5a 1c c0 usb-storage: Bulk command S 0x43425355 T 0x1 Trg 0 LUN 0 L 0 F 0 CL 6 usb-storage: Bulk command transfer result=0 usb-storage: Attempting to get CSW... usb-storage: Bulk status result = 0 usb-storage: Bulk status Sig 0x53425355 T 0x1 R 0 Stat 0x1 usb-storage: -- transport indicates command failure usb-storage: Issuing auto-REQUEST_SENSE usb-storage: Bulk command S 0x43425355 T 0x1 Trg 0 LUN 0 L 18 F 128 CL 6 usb-storage: Bulk command transfer result=0 usb-storage: usb_stor_transfer_partial(): xfer 18 bytes usb-storage: usb_stor_bulk_msg() returned 0 xferred 18/18 usb-storage: usb_stor_transfer_partial(): transfer complete usb-storage: Bulk data transfer result 0x0 usb-storage: Attempting to get CSW... usb-storage: Bulk status result = 0 usb-storage: Bulk status Sig 0x53425355 T 0x1 R 0 Stat 0x0 usb-storage: -- Result from auto-sense is 0 usb-storage: -- code: 0x70, key: 0x6, ASC: 0x29, ASCQ: 0x0 usb-storage: Unit Attention: (unknown ASC/ASCQ) usb-storage: scsi cmd done, result=0x2 usb-storage: *** thread sleeping. usb-storage: queuecommand() called usb-storage: *** thread awakened. usb-storage: Command INQUIRY (6 bytes) usb-storage: 12 00 00 00 ff 00 00 00 75 5a 1c c0 usb-storage: Bulk command S 0x43425355 T 0x1 Trg 0 LUN 0 L 255 F 128 CL 6 usb-storage: Bulk command transfer result=0 usb-storage: usb_stor_transfer_partial(): xfer 255 bytes usb-storage: usb_stor_bulk_msg() returned 0 xferred 96/255 usb-storage: Bulk data transfer result 0x1 usb-storage: Attempting to get CSW... usb-uhci.c: interrupt, status 3, frame# 105 usb-storage: clearing endpoint halt for pipe 0xc0010280 usb-storage: Attempting to get CSW (2nd try)... usb-storage: Bulk status result = 0 usb-storage: Bulk status Sig 0x53425355 T 0x1 R 159 Stat 0x0 usb-storage: Fixing INQUIRY data to show SCSI rev 2 usb-storage: scsi cmd done, result=0x0 usb-storage: *** thread sleeping. usb-storage: queuecommand() called usb-storage: *** thread awakened. usb-storage: Bad target number (1/0) usb-storage: *** thread sleeping. usb-storage: queuecommand() called usb-storage: *** thread awakened. usb-storage: Bad target number (2/0) usb-storage: *** thread sleeping. usb-storage: queuecommand() called usb-storage: *** thread awakened. usb-storage: Bad target number (3/0) usb-storage: *** thread sleeping. usb-storage: queuecommand() called usb-storage: *** thread awakened. usb-storage: Bad target number (4/0) usb-storage: *** thread sleeping. usb-storage: queuecommand() called usb-storage: *** thread awakened. usb-storage: Bad target number (5/0) usb-storage: *** thread sleeping. usb-storage: queuecommand() called usb-storage: *** thread awakened. usb-storage: Bad target number (6/0) usb-storage: *** thread sleeping. usb-storage: queuecommand() called usb-storage: *** thread awakened. usb-storage: Bad target number (7/0) usb-storage: *** thread sleeping. WARNING: USB Mass Storage data integrity not assured USB Mass Storage device found at 2 USB Mass Storage support registered. Bin dankbar f�r jede Hilfe, Gru�, Simon -- Haeufig gestellte Fragen und Antworten (FAQ): http://www.de.debian.org/debian-user-german-FAQ/ Zum AUSTRAGEN schicken Sie eine Mail an [EMAIL PROTECTED] mit dem Subject "unsubscribe". Probleme? Mail an [EMAIL PROTECTED] (engl)
