Am Freitag, 7. M�rz 2003 15:14 schrieben Sie: > Viell. guckst du dir auch mal die Anzeige des Befehls: > > dmesg | grep -C3 bttv > > an. Das ist eine Ausgabe von den Bootmeldungen. > > Bei mir: > > > [EMAIL PROTECTED]:~$ dmesg | grep -C3 bttv > NTFS driver v1.1.22 [Flags: R/O MODULE] > i2c-core.o: i2c core module > i2c-algo-bit.o: i2c bit algorithm module > bttv: driver version 0.7.96 loaded > bttv: using 4 buffers with 2080k (8320k total) for capture > bttv: Host bridge is Intel Corp. 82845 845 (Brookdale) Chipset Host > Bridge > bttv: Bt8xx card found (0). > PCI: Enabling device 02:09.0 (0004 -> 0006) > PCI: Found IRQ 5 for device 02:09.0 > PCI: Sharing IRQ 5 with 02:03.0 > PCI: Sharing IRQ 5 with 02:09.1 > bttv0: Bt878 (rev 17) at 02:09.0, irq: 5, latency: 32, mmio: > 0xf5000000 > bttv0: detected: Hauppauge WinTV [card=10], PCI subsystem ID is > 0070:13eb > bttv0: using: BT878(Hauppauge (bt878)) [card=10,autodetected] > bttv0: Hauppauge/Voodoo msp34xx: reset line init [5] > i2c-core.o: adapter bt848 #0 registered as adapter 0. > bttv0: Hauppauge eeprom: model=44354, tuner=Temic 4009FR5 (20), > radio=yes > bttv0: using tuner=20 > bttv0: i2c: checking for MSP34xx @ 0x80... found > i2c-core.o: driver i2c msp3400 driver registered. > msp34xx: init: chip=MSP3415G-B8, has NICAM support > msp3410: daemon started > bttv0: i2c attach [client=MSP3415G-B8,ok] > i2c-core.o: client [MSP3415G-B8] registered to adapter [bt848 #0](pos. > 0). > bttv0: i2c: checking for TDA9875 @ 0xb0... not found > bttv0: i2c: checking for TDA7432 @ 0x8a... not found > tvaudio: TV audio decoder + audio/video mux driver > tvaudio: known chips: > tda9840,tda9873h,tda9874h/a,tda9850,tda9855,tea6300,tea6420,tda8425,pic16c5 >4 (PV951) > i2c-core.o: driver generic i2c audio driver registered. > i2c-core.o: driver i2c TV tuner driver registered. > tuner: probing bt848 #0 i2c adapter [id=0x10005] > tuner: chip found @ 0xc2 > bttv0: i2c attach [client=Temic PAL_BG (4009 FR5) or PAL_I,ok] > i2c-core.o: client [Temic PAL_BG (4009 FR5) or PAL_I] registered to > adapter [bt848 #0](pos. 1). > bttv0: registered device video0 > bttv0: registered device vbi0 > bttv0: registered device radio0 > i2c-algo-pcf.o: i2c pcf8584 algorithm module > i2c-dev.o: i2c /dev entries driver module > i2c-core.o: driver i2c-dev dummy driver registered. > > > Thomas Hi, meines sagt folgendes, da sieht man gleicht, er erkennt da irgendwas nicht oder falsch, nur was?
LordKelvinAthlonXP:/usr/doc# dmesg|grep -C3 bttv i2c-core.o: driver i2c TV tuner driver registered. i2c-core.o: driver i2c msp3400 driver registered. Linux video capture interface: v1.00 bttv: driver version 0.7.83 loaded bttv: using 2 buffers with 2080k (4160k total) for capture bttv: Host bridge is Silicon Integrated Systems [SiS] 735 Host bttv: Bt8xx card found (0). PCI: Found IRQ 11 for device 00:0f.0 PCI: Sharing IRQ 11 with 00:02.2 PCI: Sharing IRQ 11 with 00:0f.1 bttv0: Bt878 (rev 17) at 00:0f.0, irq: 11, latency: 64, memory: 0xcddfe000 bttv0: using: BT878( *** UNKNOWN/GENERIC **) [card=0,autodetected] tuner: chip found @ 0xc2 bttv0: i2c attach [client=(unset),ok] i2c-core.o: client [(unset)] registered to adapter [bt848 #0](pos. 0). i2c-core.o: adapter bt848 #0 registered as adapter 0. bttv0: i2c: checking for MSP34xx @ 0x80... not found bttv0: i2c: checking for TDA9875 @ 0xb0... not found bttv0: i2c: checking for TDA7432 @ 0x8a... not found EXT2-fs warning: mounting unchecked fs, running e2fsck is recommended hub.c: USB new device connect on bus1/1, assigned device number 2 usb.c: USB device 2 (vend/prod 0x46d/0xc00e) is not claimed by any active drive Ich hoffe, meine Karte wird _�berhaupt_ unterst�tzt. -- Markus Hansen [EMAIL PROTECTED] -- Haeufig gestellte Fragen und Antworten (FAQ): http://www.de.debian.org/debian-user-german-FAQ/ Zum AUSTRAGEN schicken Sie eine Mail an [EMAIL PROTECTED] mit dem Subject "unsubscribe". Probleme? Mail an [EMAIL PROTECTED] (engl)
