Sorry habe den Benutzernamen ge�ndert, aber leider immer noch keine Einwahl. muss der name in hochkomma stehen? Ich wei� nicht mehr weiter, device da, PAP-secret richtig
Aber
Jul 26 01:50:08 digi kernel: ippp1: dialing 1 01938792... Jul 26 01:50:16 digi kernel: isdn_net: local hangup ippp1 Jul 26 01:50:16 digi kernel: ippp1: Chargesum is 0
Modconf und meine Module ISDN
+ Support BSD compression ?
isdn Allgemeine Routinen f�r ISDN-Karten+ AVM Fritz!Card PCI/PCIv2/PnP support + AVM Fritz!Card PCI/PCIv2/PnP support +hisax+ Ger�tetreibers f�r alle Karten mit Siemens HiSax
+dss1_divert + ISDN diversion services support ________________________________________________________________________ Jul 26 01:32:41 digi kernel: HiSax: Linux Driver for passive ISDN cards Jul 26 01:32:41 digi kernel: HiSax: Version 3.5 (module) Jul 26 01:32:41 digi kernel: HiSax: Layer1 Revision 1.1.4.1 Jul 26 01:32:41 digi kernel: HiSax: Layer2 Revision 1.1.4.1 Jul 26 01:32:41 digi kernel: HiSax: TeiMgr Revision 1.1.4.1 Jul 26 01:32:41 digi kernel: HiSax: Layer3 Revision 1.1.4.1 Jul 26 01:32:41 digi kernel: HiSax: LinkLayer Revision 1.1.4.1 Jul 26 01:32:41 digi kernel: HiSax: Approval certification valid Jul 26 01:32:41 digi kernel: HiSax: Approved with ELSA Microlink PCI cards Jul 26 01:32:41 digi kernel: HiSax: Approved with Eicon Technology Diva 2.01 PCI cards Jul 26 01:32:41 digi kernel: HiSax: Approved with Sedlbauer Speedfax + cards Jul 26 01:32:41 digi kernel: HiSax: Approved with HFC-S PCI A based cards Jul 26 01:32:41 digi kernel: hisax_isac: ISAC-S/ISAC-SX ISDN driver v0.1.0 Jul 26 01:32:41 digi kernel: hisax_fcpcipnp: Fritz!Card PCI/PCIv2/PnP ISDN driver v0.0.1 Jul 26 01:32:41 digi kernel: HiSax: Card 1 Protocol EDSS1 Id=fcpcipnp0 (0) Jul 26 01:32:41 digi kernel: HiSax: DSS1 Rev. 1.1.4.1 Jul 26 01:32:41 digi kernel: HiSax: 2 channels added Jul 26 01:32:41 digi kernel: HiSax: MAX_WAITING_CALLS added Jul 26 01:32:41 digi kernel: PCI: Found IRQ 11 for device 00:14.0 Jul 26 01:32:41 digi kernel: hisax_fcpcipnp: found adapter Fritz!Card PCI at 00:14.0
________> Beim starten von isdnutils aus /var/log/syslog________________
Jul 26 01:34:31 digi isdnlog: Holiday Version 1.10-Germany [12-Apr-1999] loaded [11 entries from /usr/share/isdn/holiday-de.dat] Jul 26 01:34:31 digi isdnlog: Dest V1.01: File '/usr/share/isdn/dest.cdb' opened fine - Dest 1.0 int (+h) AT DE NL CH Jul 26 01:34:31 digi isdnlog: Zone V1.25: Provider 0 File '/usr/share/isdn/zone-de-dtag.cdb' opened fine - V1.25 K2 C2 N256 T157147 O1 L5 Jul 26 01:34:31 digi isdnlog: Rates Version 2.02 [10-Mar-2002 19:03:33] loaded [51 Providers, 387 Zones, 1780 Areas, 42 Services, 310 Comments, 0 eXceptions, 6 Redirects, 1220 Rates from /usr/share/isdn/rate-de.dat] Jul 26 01:34:31 digi isdnlog: (ISDN subsystem with ISDN_MAX_CHANNELS > 16 detected, ioctl(IIOCNETGPN) is available) Jul 26 01:34:31 digi isdnlog: isdn.conf:2 active channels, 0 MSN/SI entries Jul 26 01:34:31 digi isdnlog: (Data versions: iprofd=0x06 net_cfg=0x06 /dev/isdninfo=0x01) Jul 26 01:34:31 digi isdnlog: Everything is fine, isdnlog-4.57 is running in full featured mode.
SO, sieht ja alles ganz gut aus, aber wenn ich jetzt isdnctrl dial ippp1 eingebe bekomme ich folgende Ausgabe
Jul 26 01:50:08 digi kernel: ippp1: dialing 1 01938792... Jul 26 01:50:16 digi kernel: isdn_net: local hangup ippp1 Jul 26 01:50:16 digi kernel: ippp1: Chargesum is 0
Keine Verbindung zum Provider, mein Isdn device wird mittels ifconfig angezeigt. ippp0 ist da aber keine Einwahl.
Ich habe schon dual win98 installiert und an der selben leitung mit der selben Karte isdnverbindung erhalten. Also Karte o.k. Leitung o.k.
HMMM hilfe wer kann helfen??
_________________________________________________________________________ DIE WICHTIGSTEN AUSZ�GE AUS MEINER /device.ippp1
LOCALIP=10.0.0.1 # XXX_ REMOTEIP=10.0.0.2 # XXX_
LOCALMSN=7618978866 # XXX_ REMOTEMSN=01938792 # XXX_
DIALMODE=manual # XXX_ other values can be 'on' and 'off'
_________________________________________________________________________ AUSZ�GE AUS MEINER /etc/isdn/ipppd.ippp1
# ppp handshake : tuning lcp-restart 1 # Set timeout for LCP
# AUTHENTICATION name 12018 # set local name for auth XXX_
# COMPRESSION noccp # compression negotation on/off nolzs # LZS compression off (not yet supported fully)
_______________________________________________________________________________ AUSZ�GE AUS MEINER /etc/isdn/isdn.conf
[GLOBAL] COUNTRYPREFIX = + COUNTRYCODE = 49 AREAPREFIX = 0
# EDIT THIS LINE: AREACODE =761
________________________________________________________________________ AUSZ�GE AUS MEINER /etc/ppp/pap-secrets
# Here you should add your userid password to connect to your providers #via # PAP. The * means that the password is to be used for ANY host you #connect # to. Thus you do not have to worry about the foreign machine name. Just # replace password with your password. # If you have different providers with different passwords then you better # remove the following line.
[EMAIL PROTECTED] * xxxxxx
12018 * 587569 # LOGIN UND PASS FAKE !!!
# Added by automatic ipppd configuration
-- Haeufig gestellte Fragen und Antworten (FAQ): http://www.de.debian.org/debian-user-german-FAQ/
Zum AUSTRAGEN schicken Sie eine Mail an [EMAIL PROTECTED]
mit dem Subject "unsubscribe". Probleme? Mail an [EMAIL PROTECTED] (engl)
--
Haeufig gestellte Fragen und Antworten (FAQ): http://www.de.debian.org/debian-user-german-FAQ/
Zum AUSTRAGEN schicken Sie eine Mail an [EMAIL PROTECTED] mit dem Subject "unsubscribe". Probleme? Mail an [EMAIL PROTECTED] (engl)
