Hallo, ich hab mal in
/usr/share/doc/cdrecord/README.clone und /usr/share/doc/cdrecord/README.copy gest�bert, und bin auf "readcd" gestossen. Kannte ich bis Dato nicht. ,----[ /usr/share/doc/cdrecord/README.copy ] | The best way to copy a data disk is to copy the raw data on the master CD. | This may be done by reading the data from the raw device by using 'readcd'. | | | NOTE: All CD-R's written in Track At Once mode end in two unreadable | run-out sectors. If the disk has been written with a Yamaha CD-R100 | or with a Yamaha CD-R102, there are even more run-out sectors. | | For this reason, you will not be able to read such a CD correctly with 'dd'. `---- Ich hab also eine Datenreiche CD hervorgekramt, und wollte das mal versuchen, dieses 'readcd'. Es wirft nur Fehler! (sind unten angeh�ngt�). Ich hab alle m�glichen Gechwindigkeiten ausprobiert, bishin zu speed=0 (readcd dev=1,0,0 -speed=0 -clone -f=rawdisc) Zur Hardware: ,---- | scsibus1: | 1,0,0 100) 'PLEXTOR ' 'CD-R PX-W5224A' '1.02' Removable CD-ROM `---- �ber die readcd-Version kann ich gerade nix sagen, ich weiss gar nicht aus welchem Paket das kommt - wie ermittel ich das? Was ist das Problem von readcd? Die CD ist ein Originalmedium, schlecht lesbar kann es also nicht sein - l�sst sich ja sonst auch ganz normal lesen. Heino �) scsidev: '1,0,0' scsibus: 1 target: 0 lun: 0 Linux sg driver version: 3.1.22 Read speed: 706 kB/s (CD 4x, DVD 0x). Write speed: 706 kB/s (CD 4x, DVD 0x). TOC len: 48. First Session: 1 Last Session: 1. 01 10 00 A0 00 00 00 00 01 00 00 01 14 00 A1 00 00 00 00 01 00 00 01 14 00 A2 00 00 00 00 44 00 46 01 14 00 01 00 00 00 00 00 02 00 Lead out 1: 305920 Capacity: 305920 Blocks = 611840 kBytes = 597 MBytes = 626 prMB Sectorsize: 2048 Bytes Copy from SCSI (1,0,0) disk to file 'windows98' end: 305920 readcd: Input/output error. read_cd: scsi sendcmd: no error CDB: BE 00 00 01 F8 12 00 00 6B F8 01 00 status: 0x2 (CHECK CONDITION) Sense Bytes: F0 00 03 00 01 F8 39 0A 00 00 00 00 11 05 00 00 Sense Key: 0x3 Medium Error, Segment 0 Sense Code: 0x11 Qual 0x05 (l-ec uncorrectable error) Fru 0x0 Sense flags: Blk 129081 (valid) cmd finished after 2.234s timeout 40s readcd: Input/output error. Cannot read source disk readcd: Retrying from sector 129042. ........ readcd: Input/output error. Error on sector 129049 not corrected. Total of 1 errors. readcd: Input/output error. read_cd: scsi sendcmd: no error CDB: BE 00 00 01 F8 19 00 00 01 F8 01 00 status: 0x2 (CHECK CONDITION) Sense Bytes: F0 00 05 00 01 F8 19 0A 00 00 00 00 64 00 00 00 Sense Key: 0x5 Illegal Request, Segment 0 Sense Code: 0x64 Qual 0x00 (illegal mode for this track) Fru 0x0 Sense flags: Blk 129049 (valid) cmd finished after 0.000s timeout 40s readcd: -noerror set, continuing ... . readcd: Input/output error. Error on sector 129050 not corrected. Total of 2 errors. readcd: Input/output error. read_cd: scsi sendcmd: no error CDB: BE 00 00 01 F8 1A 00 00 01 F8 01 00 status: 0x2 (CHECK CONDITION) Sense Bytes: F0 00 05 00 01 F8 1A 0A 00 00 00 00 64 00 00 00 Sense Key: 0x5 Illegal Request, Segment 0 Sense Code: 0x64 Qual 0x00 (illegal mode for this track) Fru 0x0 Sense flags: Blk 129050 (valid) cmd finished after 0.000s timeout 40s readcd: -noerror set, continuing ... ............................... readcd: Input/output error. Error on sector 129081 not corrected. Total of 3 errors. readcd: Input/output error. read_cd: scsi sendcmd: no error CDB: BE 00 00 01 F8 39 00 00 01 F8 01 00 status: 0x2 (CHECK CONDITION) Sense Bytes: F0 00 05 00 01 F8 39 0A 00 00 00 00 64 00 00 00 Sense Key: 0x5 Illegal Request, Segment 0 Sense Code: 0x64 Qual 0x00 (illegal mode for this track) Fru 0x0 Sense flags: Blk 129081 (valid) cmd finished after 0.000s timeout 40s readcd: -noerror set, continuing ... readcd: Input/output error. read_cd: scsi sendcmd: no error........addr: 129149 cnt: 107CDB: BE 00 00 01 F8 7D 00 00 6B F8 01 00 status: 0x2 (CHECK CONDITION) Sense Bytes: F0 00 03 00 01 F8 98 0A 00 00 00 00 11 05 00 00 Sense Key: 0x3 Medium Error, Segment 0 Sense Code: 0x11 Qual 0x05 (l-ec uncorrectable error) Fru 0x0 Sense flags: Blk 129176 (valid) cmd finished after 2.355s timeout 40s readcd: Input/output error. Cannot read source disk readcd: Retrying from sector 129149. ............................ readcd: Input/output error. Error on sector 129176 not corrected. Total of 4 errors. readcd: Input/output error. read_cd: scsi sendcmd: no error CDB: BE 00 00 01 F8 98 00 00 01 F8 01 00 status: 0x2 (CHECK CONDITION) Sense Bytes: F0 00 05 00 01 F8 98 0A 00 00 00 00 64 00 00 00 Sense Key: 0x5 Illegal Request, Segment 0 Sense Code: 0x64 Qual 0x00 (illegal mode for this track) Fru 0x0 Sense flags: Blk 129176 (valid) cmd finished after 0.000s timeout 40s readcd: -noerror set, continuing ... . readcd: Error on sector 129177 corrected after 6 tries. Total of 4 errors. ............... readcd: Input/output error. Error on sector 129192 not corrected. Total of 5 errors. readcd: Input/output error. read_cd: scsi sendcmd: no error CDB: BE 00 00 01 F8 A8 00 00 01 F8 01 00 status: 0x2 (CHECK CONDITION) Sense Bytes: F0 00 03 00 01 F8 A8 0A 00 00 00 00 02 81 00 00 Sense Key: 0x3 Medium Error, Segment 0 Sense Code: 0x02 Qual 0x81 (no seek complete) [No matching qualifier] Fru 0x0 Sense flags: Blk 129192 (valid) cmd finished after 1.579s timeout 40s readcd: -noerror set, continuing ... readcd: Input/output error. read_cd: scsi sendcmd: no error....addr: 129256 cnt: 107 CDB: BE 00 00 01 F8 E8 00 00 6B F8 01 00 status: 0x2 (CHECK CONDITION) Sense Bytes: F0 00 03 00 01 F8 F7 0A 00 00 00 00 02 83 00 00 Sense Key: 0x3 Medium Error, Segment 0 Sense Code: 0x02 Qual 0x83 (no seek complete) [No matching qualifier] Fru 0x0 Sense flags: Blk 129271 (valid) cmd finished after 2.999s timeout 40s readcd: Input/output error. Cannot read source disk readcd: Retrying from sector 129256. -- Haeufig gestellte Fragen und Antworten (FAQ): http://www.de.debian.org/debian-user-german-FAQ/ Zum AUSTRAGEN schicken Sie eine Mail an [EMAIL PROTECTED] mit dem Subject "unsubscribe". Probleme? Mail an [EMAIL PROTECTED] (engl)
