On Mon, 09 Feb 2004 21:04:30 +0100 Reinhold Plew <[EMAIL PROTECTED]> wrote:
> > Vladislav Vorobiev schrieb: > > > Der installer leuft ohne probleme durch. Und es ist wirklich so das ich die RESCUE > > miit /mnt/debian/bla.... vertausch habe. > > > > Also hier nochmal: > > > > LILO: > > rescue:/mnt# more etc/lilo.conf > > boot=/dev/hda > > root=/dev/hda3 > > install=/boot/boot-menu.b > > lba32 > > image=/vmlinuz > > label=debian > > read-only > > > > Sieht ok aus. > > > > ---------------------- > > > > address 82.165.30.47 > > netmask 255.255.255.255 > > network 82.165.30.0 > > broadcast 82.165.30.255 > > gateway 82.165.30.1 > > up /sbin/route delete -net 82.165.30.0/24 > > > > Hier musste ich die netmark korregieren, weil der Installer 255.255.255.0 > > eingetragen hat. Was definitiv falsch ist. Ich weiss nicht ob das auswirkungen auf > > die weitere konfiguration hat. Kann mir da jemand helfen? > > Desweiteren habe ich von Puretec gesagt bekommen das die Gateway 212.227.125.135 > > was etwas komisch ist. Normallerweise muss doch die Gatwayadresse im gleichem > > Segment sein, oder nicht? > > nur mal interessehalber: warum sollte die Netmask falsch gewesen sein? > Das, was Du jetzt eingetragen hast, f�hrt dazu, das der Server > denkt, sein Netz w�re 82.165.30.47, also er selbst. > Mehr kennt er jetzt nicht mehr, ich denke aber, das er im Netz > 82.165.30.0 steht, also war die Puretec-Maske korrekt. > > > > > -------------------------- > > > > fstab schein mir ok zu sein. > > > > rescue:/mnt# more etc/fstab > > /dev/hda2 none swap sw 0 0 > > /dev/hda3 / ext3 defaults 0 1 > > /dev/hda1 /boot ext3 defaults 1 2 > > proc /proc proc defaults 0 0 > > /dev/hda5 /usr ext3 defaults 0 1 > > /dev/hda6 /home ext3 defaults 0 1 > > /dev/hda7 /tmp ext3 defaults 0 1 > > /dev/hda8 /var ext3 defaults 0 1 > > > > ------------------------------------------------------------------------------------ > > > > Ihrgend was stimmt da nicht. Wenn ich von der Festplatte boote, kann ich den > > Server nicht mal anpingen. Kann mir jemand helfen? Was ist falsch? > > liegt wohl an der falschen Netmask > > Gruss > Reinhold Hallo, Netmask habe ich 255.255.255.0 ges�tzt. Doch es geht trotzdem nicht. Ich habe auch den, von Puretec 212.227.125.135 als G�teway ausprobiert. Ich kann aus dem RESCUE system auf Logfiles zugreifen. Sieht so aus als ob das System booten w�rde, aber genaueres kann ich daraus nicht entnehmen. Vileicht eine von euch? escue:/mnt/var/log# more dmesg Linux version 2.4.18-bf2.4 ([EMAIL PROTECTED]) (gcc version 2.95.4 20011002 (Debian prerelease)) #1 Son Apr 14 09:53:28 CEST 2002 BIOS-provided physical RAM map: BIOS-e820: 0000000000000000 - 00000000000a0000 (usable) BIOS-e820: 00000000000f0000 - 0000000000100000 (reserved) BIOS-e820: 0000000000100000 - 000000000f7f0000 (usable) BIOS-e820: 000000000f7f0000 - 000000000f7f3000 (ACPI NVS) BIOS-e820: 000000000f7f3000 - 000000000f800000 (ACPI data) BIOS-e820: 00000000fec00000 - 0000000100000000 (reserved) found SMP MP-table at 000f4ec0 hm, page 000f4000 reserved twice. hm, page 000f5000 reserved twice. hm, page 000f0000 reserved twice. hm, page 000f1000 reserved twice. On node 0 totalpages: 63472 zone(0): 4096 pages. zone(1): 59376 pages. zone(2): 0 pages. Intel MultiProcessor Specification v1.4 Virtual Wire compatibility mode. OEM ID: OEM00000 Product ID: PROD00000000 APIC at: 0xFEE00000 Processor #0 Unknown CPU [15:2] APIC version 17 I/O APIC #2 Version 17 at 0xFEC00000. Processors: 1 Kernel command line: auto BOOT_IMAGE=debian ro root=303 Initializing CPU#0 Detected 2003.459 MHz processor. Console: colour VGA+ 80x25 Calibrating delay loop... 3997.69 BogoMIPS Memory: 246580k/253888k available (1783k kernel code, 6924k reserved, 549k data, 280k init, 0k highmem) Dentry-cache hash table entries: 32768 (order: 6, 262144 bytes) Inode-cache hash table entries: 16384 (order: 5, 131072 bytes) Mount-cache hash table entries: 4096 (order: 3, 32768 bytes) Buffer-cache hash table entries: 16384 (order: 4, 65536 bytes) Page-cache hash table entries: 65536 (order: 6, 262144 bytes) CPU: Before vendor init, caps: bfebfbff 00000000 00000000, vendor = 0 CPU: L1 I cache: 12K, L1 D cache: 8K CPU: After vendor init, caps: bfebfbff 00000000 00000000 00000000 Intel machine check architecture supported. Intel machine check reporting enabled on CPU#0. CPU: After generic, caps: bfebfbff 00000000 00000000 00000000 CPU: Common caps: bfebfbff 00000000 00000000 00000000 CPU: Intel(R) Celeron(R) CPU 2.00GHz stepping 07 Enabling fast FPU save and restore... done. Enabling unmasked SIMD FPU exception support... done. Checking 'hlt' instruction... OK. Checking for popad bug... OK. POSIX conformance testing by UNIFIX enabled ExtINT on CPU#0 ESR value before enabling vector: 00000000 ESR value after enabling vector: 00000000 ENABLING IO-APIC IRQs Setting 2 in the phys_id_present_map ...changing IO-APIC physical APIC ID to 2 ... ok. init IO_APIC IRQs IO-APIC (apicid-pin) 2-0, 2-5, 2-11, 2-12, 2-17, 2-18, 2-19, 2-20, 2-22 not connected. ..TIMER: vector=0x31 pin1=2 pin2=0 number of MP IRQ sources: 19. number of IO-APIC #2 registers: 24. testing the IO APIC....................... IO APIC #2...... .... register #00: 02000000 ....... : physical APIC id: 02 .... register #01: 00178003 ....... : max redirection entries: 0017 ....... : PRQ implemented: 1 ....... : IO APIC version: 0003 WARNING: unexpected IO-APIC, please mail to [EMAIL PROTECTED] .... IRQ redirection table: NR Log Phy Mask Trig IRR Pol Stat Dest Deli Vect: 00 000 00 1 0 0 0 0 0 0 00 01 001 01 0 0 0 0 0 1 1 39 02 001 01 0 0 0 0 0 1 1 31 03 001 01 0 0 0 0 0 1 1 41 04 001 01 0 0 0 0 0 1 1 49 05 000 00 1 0 0 0 0 0 0 00 06 001 01 0 0 0 0 0 1 1 51 07 001 01 0 0 0 0 0 1 1 59 08 001 01 0 0 0 0 0 1 1 61 09 001 01 0 0 0 0 0 1 1 69 0a 001 01 0 0 0 0 0 1 1 71 0b 000 00 1 0 0 0 0 0 0 00 0c 000 00 1 0 0 0 0 0 0 00 0d 001 01 0 0 0 0 0 1 1 79 0e 001 01 0 0 0 0 0 1 1 81 0f 001 01 1 1 0 1 0 1 1 89 10 001 01 1 1 0 1 0 1 1 91 11 000 00 1 0 0 0 0 0 0 00 12 000 00 1 0 0 0 0 0 0 00 13 000 00 1 0 0 0 0 0 0 00 14 000 00 1 0 0 0 0 0 0 00 15 001 01 1 1 0 1 0 1 1 99 16 000 00 1 0 0 0 0 0 0 00 17 001 01 1 1 0 1 0 1 1 A1 IRQ to pin mappings: IRQ0 -> 0:2 IRQ1 -> 0:1 IRQ3 -> 0:3 IRQ4 -> 0:4 IRQ6 -> 0:6 IRQ7 -> 0:7 IRQ8 -> 0:8 IRQ9 -> 0:9 IRQ10 -> 0:10 IRQ13 -> 0:13 IRQ14 -> 0:14 IRQ15 -> 0:15 IRQ16 -> 0:16 IRQ21 -> 0:21 IRQ23 -> 0:23 .................................... done. Using local APIC timer interrupts. calibrating APIC timer ... ..... CPU clock speed is 2003.4656 MHz. ..... host bus clock speed is 100.1731 MHz. cpu: 0, clocks: 1001731, slice: 500865 CPU0<T0:1001728,T1:500848,D:15,S:500865,C:1001731> mtrr: v1.40 (20010327) Richard Gooch ([EMAIL PROTECTED]) mtrr: detected mtrr type: Intel PCI: PCI BIOS revision 2.10 entry at 0xfb300, last bus=1 PCI: Using configuration type 1 PCI: Probing PCI hardware Unknown bridge resource 0: assuming transparent PCI: Using IRQ router default [1106/3148] at 00:00.0 PCI->APIC IRQ transform: (B0,I16,P0) -> 21 PCI->APIC IRQ transform: (B0,I16,P1) -> 21 PCI->APIC IRQ transform: (B0,I16,P2) -> 21 PCI->APIC IRQ transform: (B0,I16,P3) -> 21 PCI->APIC IRQ transform: (B0,I17,P0) -> 15 PCI->APIC IRQ transform: (B0,I18,P0) -> 23 PCI->APIC IRQ transform: (B1,I0,P0) -> 16 PCI: Via IRQ fixup for 00:10.0, from 15 to 5 PCI: Via IRQ fixup for 00:10.2, from 12 to 5 Linux NET4.0 for Linux 2.4 Based upon Swansea University Computer Society NET3.039 Initializing RT netlink socket Starting kswapd VFS: Diskquotas version dquot_6.4.0 initialized Journalled Block Device driver loaded vga16fb: initializing vga16fb: mapped to 0xc00a0000 Console: switching to colour frame buffer device 80x30 fb0: VGA16 VGA frame buffer device Detected PS/2 Mouse Port. pty: 256 Unix98 ptys configured Serial driver version 5.05c (2001-07-0Cool with MANY_PORTS SHARE_IRQ SERIAL_PCI enabled keyboard: Timeout - AT keyboard not present?(ed) keyboard: Timeout - AT keyboard not present?(f4) ttyS00 at 0x03f8 (irq = 4) is a 16550A Real Time Clock Driver v1.10e block: 128 slots per queue, batch=32 RAMDISK driver initialized: 16 RAM disks of 4096K size 1024 blocksize Uniform Multi-Platform E-IDE driver Revision: 6.31 ide: Assuming 33MHz system bus speed for PIO modes; override with idebus=xx VP_IDE: IDE controller on PCI bus 00 dev 89 VP_IDE: chipset revision 6 VP_IDE: not 100% native mode: will probe irqs later VP_IDE: Unknown VIA SouthBridge, contact Vojtech Pavlik <[EMAIL PROTECTED]> hda: IC35L040AVVA07-0, ATA DISK drive ide0 at 0x1f0-0x1f7,0x3f6 on irq 14 ide0: probed IRQ 14 failed, using default. hda: 80418240 sectors (41174 MB) w/1863KiB Cache, CHS=5005/255/63 ide-floppy driver 0.97.sv Partition check: hda: hda1 hda2 hda3 hda4 < hda5 hda6 hda7 hda8 > floppy0: no floppy controllers found Loading I2O Core - (c) Copyright 1999 Red Hat Software I2O configuration manager v 0.04. (C) Copyright 1999 Red Hat Software loop: loaded (max 8 devices) Compaq CISS Driver (v 2.4.5) HDLC support module revision 1.02 for Linux 2.4 Cronyx Ltd, Synchronous PPP and CISCO HDLC (c) 1994 Linux port (c) 1998 Building Number Three Ltd & Jan "Yenya" Kasprzak. ide-floppy driver 0.97.sv Promise Fasttrak(tm) Softwareraid driver 0.03beta: No raid array found Highpoint HPT370 Softwareraid driver for linux version 0.01 No raid array found SCSI subsystem driver Revision: 1.00 Red Hat/Adaptec aacraid driver, Apr 14 2002 DC390: 0 adapters found 3ware Storage Controller device driver for Linux v1.02.00.016. 3w-xxxx: No cards with valid units found. request_module[scsi_hostadapter]: Root fs not mounted request_module[scsi_hostadapter]: Root fs not mounted i2o_scsi.c: Version 0.0.1 chain_pool: 0 bytes @ c13e4aa0 (512 byte buffers X 4 can_queue X 0 i2o controllers) NET4: Linux TCP/IP 1.0 for NET4.0 IP Protocols: ICMP, UDP, TCP, IGMP IP: routing cache hash table of 2048 buckets, 16Kbytes TCP: Hash tables configured (established 16384 bind 16384) NET4: Unix domain sockets 1.0/SMP for Linux NET4.0. kjournald starting. Commit interval 5 seconds EXT3-fs: mounted filesystem with ordered data mode. VFS: Mounted root (ext3 filesystem) readonly. Freeing unused kernel memory: 280k freed Adding Swap: 257032k swap-space (priority -1) EXT3 FS 2.4-0.9.17, 10 Jan 2002 on ide0(3,3), internal journal via-rhine.c:v1.10-LK1.1.13 Nov-17-2001 Written by Donald Becker http://www.scyld.com/network/via-rhine.html eth0: VIA VT6102 Rhine-II at 0xe000, 00:40:63:c7:aa:e8, IRQ 23. eth0: MII PHY found at address 1, status 0x786d advertising 05e1 Link 41e1. kjournald starting. Commit interval 5 seconds EXT3 FS 2.4-0.9.17, 10 Jan 2002 on ide0(3,1), internal journal EXT3-fs: mounted filesystem with ordered data mode. kjournald starting. Commit interval 5 seconds EXT3 FS 2.4-0.9.17, 10 Jan 2002 on ide0(3,5), internal journal EXT3-fs: mounted filesystem with ordered data mode. kjournald starting. Commit interval 5 seconds EXT3 FS 2.4-0.9.17, 10 Jan 2002 on ide0(3,6), internal journal EXT3-fs: mounted filesystem with ordered data mode. kjournald starting. Commit interval 5 seconds EXT3 FS 2.4-0.9.17, 10 Jan 2002 on ide0(3,7), internal journal EXT3-fs: mounted filesystem with ordered data mode. kjournald starting. Commit interval 5 seconds EXT3 FS 2.4-0.9.17, 10 Jan 2002 on ide0(3,Cool, internal journal EXT3-fs: mounted filesystem with ordered data mode. eth0: Setting full-duplex based on MII #1 link partner capability of 41e1. Und noch zur sicherheit Messages: Feb 10 13:17:33 p15150407 syslogd 1.4.1#10: restart. Feb 10 13:17:33 p15150407 kernel: klogd 1.4.1#10, log source = /proc/kmsg started. Feb 10 13:17:33 p15150407 kernel: Inspecting /boot/System.map-2.4.18-bf2.4 Feb 10 13:17:34 p15150407 kernel: Loaded 19371 symbols from /boot/System.map-2.4.18-bf2.4. Feb 10 13:17:34 p15150407 kernel: Symbols match kernel version 2.4.18. Feb 10 13:17:34 p15150407 kernel: Loaded 6 symbols from 1 module. Feb 10 13:17:34 p15150407 kernel: Linux version 2.4.18-bf2.4 ([EMAIL PROTECTED]) (gcc version 2.95.4 20011002 (Debian prerelease)) #1 So n Apr 14 09:53:28 CEST 2002 Feb 10 13:17:34 p15150407 kernel: BIOS-provided physical RAM map: Feb 10 13:17:34 p15150407 kernel: BIOS-e820: 0000000000000000 - 00000000000a0000 (usable) Feb 10 13:17:34 p15150407 kernel: BIOS-e820: 00000000000f0000 - 0000000000100000 (reserved) Feb 10 13:17:34 p15150407 kernel: BIOS-e820: 0000000000100000 - 000000000f7f0000 (usable) Feb 10 13:17:34 p15150407 kernel: BIOS-e820: 000000000f7f0000 - 000000000f7f3000 (ACPI NVS) Feb 10 13:17:34 p15150407 kernel: BIOS-e820: 000000000f7f3000 - 000000000f800000 (ACPI data) Feb 10 13:17:34 p15150407 kernel: BIOS-e820: 00000000fec00000 - 0000000100000000 (reserved) Feb 10 13:17:34 p15150407 kernel: found SMP MP-table at 000f4ec0 Feb 10 13:17:34 p15150407 kernel: hm, page 000f4000 reserved twice. Feb 10 13:17:34 p15150407 kernel: hm, page 000f5000 reserved twice. Feb 10 13:17:34 p15150407 kernel: hm, page 000f0000 reserved twice. Feb 10 13:17:34 p15150407 kernel: hm, page 000f1000 reserved twice. Feb 10 13:17:34 p15150407 kernel: On node 0 totalpages: 63472 Feb 10 13:17:34 p15150407 kernel: zone(0): 4096 pages. Feb 10 13:17:34 p15150407 kernel: zone(1): 59376 pages. Feb 10 13:17:34 p15150407 kernel: zone(2): 0 pages. Feb 10 13:17:34 p15150407 kernel: Intel MultiProcessor Specification v1.4 Feb 10 13:17:34 p15150407 kernel: Virtual Wire compatibility mode. Feb 10 13:17:34 p15150407 kernel: OEM ID: OEM00000 Product ID: PROD00000000 APIC at: 0xFEE00000 Feb 10 13:17:34 p15150407 kernel: Processor #0 Unknown CPU [15:2] APIC version 17 Feb 10 13:17:34 p15150407 kernel: I/O APIC #2 Version 17 at 0xFEC00000. Feb 10 13:17:34 p15150407 kernel: Processors: 1 Feb 10 13:17:34 p15150407 kernel: Kernel command line: auto BOOT_IMAGE=debian ro root=303 Feb 10 13:17:34 p15150407 kernel: Initializing CPU#0 Feb 10 13:17:34 p15150407 kernel: Detected 2003.459 MHz processor. Feb 10 13:17:34 p15150407 kernel: Console: colour VGA+ 80x25 Feb 10 13:17:34 p15150407 kernel: Calibrating delay loop... 3997.69 BogoMIPS Feb 10 13:17:34 p15150407 kernel: Memory: 246580k/253888k available (1783k kernel code, 6924k reserved, 549k data, 280k init, 0k h ighmem) Feb 10 13:17:34 p15150407 kernel: Dentry-cache hash table entries: 32768 (order: 6, 262144 bytes) Feb 10 13:17:34 p15150407 kernel: Inode-cache hash table entries: 16384 (order: 5, 131072 bytes) Feb 10 13:17:34 p15150407 kernel: Mount-cache hash table entries: 4096 (order: 3, 32768 bytes) Feb 10 13:17:34 p15150407 kernel: Buffer-cache hash table entries: 16384 (order: 4, 65536 bytes) Feb 10 13:17:34 p15150407 kernel: Page-cache hash table entries: 65536 (order: 6, 262144 bytes) Feb 10 13:17:34 p15150407 kernel: CPU: L1 I cache: 12K, L1 D cache: 8K Feb 10 13:17:34 p15150407 kernel: Intel machine check architecture supported. Feb 10 13:17:34 p15150407 kernel: Intel machine check reporting enabled on CPU#0. Feb 10 13:17:34 p15150407 kernel: CPU: Intel(R) Celeron(R) CPU 2.00GHz stepping 07 Feb 10 13:17:34 p15150407 kernel: Enabling fast FPU save and restore... done. Feb 10 13:17:34 p15150407 kernel: Enabling unmasked SIMD FPU exception support... done. Feb 10 13:17:34 p15150407 kernel: Checking 'hlt' instruction... OK. Feb 10 13:17:34 p15150407 kernel: Checking for popad bug... OK. Feb 10 13:17:34 p15150407 kernel: POSIX conformance testing by UNIFIX Feb 10 13:17:34 p15150407 kernel: enabled ExtINT on CPU#0 Feb 10 13:17:34 p15150407 kernel: ESR value before enabling vector: 00000000 Feb 10 13:17:34 p15150407 kernel: ESR value after enabling vector: 00000000 Feb 10 13:17:34 p15150407 kernel: ENABLING IO-APIC IRQs Feb 10 13:17:34 p15150407 kernel: Setting 2 in the phys_id_present_map Feb 10 13:17:34 p15150407 kernel: ...changing IO-APIC physical APIC ID to 2 ... ok. Feb 10 13:17:34 p15150407 kernel: ..TIMER: vector=0x31 pin1=2 pin2=0 Feb 10 13:17:34 p15150407 kernel: testing the IO APIC....................... Feb 10 13:17:34 p15150407 kernel: Feb 10 13:17:34 p15150407 kernel: WARNING: unexpected IO-APIC, please mail Feb 10 13:17:34 p15150407 kernel: to [EMAIL PROTECTED] Feb 10 13:17:34 p15150407 kernel: .................................... done. Feb 10 13:17:34 p15150407 kernel: Using local APIC timer interrupts. Feb 10 13:17:34 p15150407 kernel: calibrating APIC timer ... Feb 10 13:17:34 p15150407 kernel: ..... CPU clock speed is 2003.4656 MHz. Feb 10 13:17:34 p15150407 kernel: ..... host bus clock speed is 100.1731 MHz. Feb 10 13:17:34 p15150407 kernel: cpu: 0, clocks: 1001731, slice: 500865 Feb 10 13:17:34 p15150407 kernel: CPU0<T0:1001728,T1:500848,D:15,S:500865,C:1001731> Feb 10 13:17:34 p15150407 kernel: mtrr: v1.40 (20010327) Richard Gooch ([EMAIL PROTECTED]) Feb 10 13:17:34 p15150407 kernel: mtrr: detected mtrr type: Intel Feb 10 13:17:34 p15150407 kernel: PCI: PCI BIOS revision 2.10 entry at 0xfb300, last bus=1 Feb 10 13:17:34 p15150407 kernel: PCI: Using configuration type 1 Feb 10 13:17:34 p15150407 kernel: PCI: Probing PCI hardware Feb 10 13:17:34 p15150407 kernel: PCI: Using IRQ router default [1106/3148] at 00:00.0 Feb 10 13:17:34 p15150407 kernel: PCI->APIC IRQ transform: (B0,I16,P0) -> 21 Feb 10 13:17:34 p15150407 kernel: PCI->APIC IRQ transform: (B0,I16,P1) -> 21 Feb 10 13:17:34 p15150407 kernel: PCI->APIC IRQ transform: (B0,I16,P2) -> 21 Feb 10 13:17:34 p15150407 kernel: PCI->APIC IRQ transform: (B0,I16,P3) -> 21 Feb 10 13:17:34 p15150407 kernel: PCI->APIC IRQ transform: (B0,I17,P0) -> 15 Feb 10 13:17:34 p15150407 kernel: PCI->APIC IRQ transform: (B0,I18,P0) -> 23 Feb 10 13:17:34 p15150407 kernel: PCI->APIC IRQ transform: (B1,I0,P0) -> 16 Feb 10 13:17:34 p15150407 kernel: PCI: Via IRQ fixup for 00:10.0, from 15 to 5 Feb 10 13:17:34 p15150407 kernel: PCI: Via IRQ fixup for 00:10.2, from 12 to 5 Feb 10 13:17:34 p15150407 kernel: Linux NET4.0 for Linux 2.4 Feb 10 13:17:34 p15150407 kernel: Based upon Swansea University Computer Society NET3.039 Feb 10 13:17:34 p15150407 kernel: Initializing RT netlink socket Feb 10 13:17:34 p15150407 kernel: Starting kswapd Feb 10 13:17:34 p15150407 kernel: VFS: Diskquotas version dquot_6.4.0 initialized Feb 10 13:17:34 p15150407 kernel: Journalled Block Device driver loaded Feb 10 13:17:34 p15150407 kernel: vga16fb: mapped to 0xc00a0000 Feb 10 13:17:34 p15150407 kernel: Console: switching to colour frame buffer device 80x30 Feb 10 13:17:34 p15150407 kernel: fb0: VGA16 VGA frame buffer device Feb 10 13:17:34 p15150407 kernel: Detected PS/2 Mouse Port. Feb 10 13:17:34 p15150407 kernel: pty: 256 Unix98 ptys configured Feb 10 13:17:34 p15150407 kernel: Serial driver version 5.05c (2001-07-0Cool with MANY_PORTS SHARE_IRQ SERIAL_PCI enabled Feb 10 13:17:34 p15150407 kernel: keyboard: Timeout - AT keyboard not present?(ed) Feb 10 13:17:34 p15150407 kernel: keyboard: Timeout - AT keyboard not present?(f4) Feb 10 13:17:34 p15150407 kernel: ttyS00 at 0x03f8 (irq = 4) is a 16550A Feb 10 13:17:34 p15150407 kernel: Real Time Clock Driver v1.10e Feb 10 13:17:34 p15150407 kernel: block: 128 slots per queue, batch=32 Feb 10 13:17:34 p15150407 kernel: RAMDISK driver initialized: 16 RAM disks of 4096K size 1024 blocksize Feb 10 13:17:34 p15150407 kernel: Uniform Multi-Platform E-IDE driver Revision: 6.31 Feb 10 13:17:34 p15150407 kernel: ide: Assuming 33MHz system bus speed for PIO modes; override with idebus=xx Feb 10 13:17:34 p15150407 kernel: VP_IDE: IDE controller on PCI bus 00 dev 89 Feb 10 13:17:34 p15150407 kernel: VP_IDE: chipset revision 6 Feb 10 13:17:34 p15150407 kernel: VP_IDE: not 100%% native mode: will probe irqs later Feb 10 13:17:34 p15150407 kernel: VP_IDE: Unknown VIA SouthBridge, contact Vojtech Pavlik <[EMAIL PROTECTED]> Feb 10 13:17:34 p15150407 kernel: hda: IC35L040AVVA07-0, ATA DISK drive Feb 10 13:17:34 p15150407 kernel: ide0 at 0x1f0-0x1f7,0x3f6 on irq 14 Feb 10 13:17:34 p15150407 kernel: ide0: probed IRQ 14 failed, using default. Feb 10 13:17:34 p15150407 kernel: hda: 80418240 sectors (41174 MB) w/1863KiB Cache, CHS=5005/255/63 Feb 10 13:17:34 p15150407 kernel: ide-floppy driver 0.97.sv Feb 10 13:17:34 p15150407 kernel: Partition check: Feb 10 13:17:34 p15150407 kernel: hda: hda1 hda2 hda3 hda4 < hda5 hda6 hda7 hda8 > Feb 10 13:17:34 p15150407 kernel: floppy0: no floppy controllers found Feb 10 13:17:34 p15150407 kernel: Loading I2O Core - (c) Copyright 1999 Red Hat Software Feb 10 13:17:34 p15150407 kernel: I2O configuration manager v 0.04. Feb 10 13:17:34 p15150407 kernel: (C) Copyright 1999 Red Hat Software Feb 10 13:17:34 p15150407 kernel: loop: loaded (max 8 devices) Feb 10 13:17:34 p15150407 kernel: Compaq CISS Driver (v 2.4.5) Feb 10 13:17:34 p15150407 kernel: HDLC support module revision 1.02 for Linux 2.4 Feb 10 13:17:34 p15150407 kernel: Cronyx Ltd, Synchronous PPP and CISCO HDLC (c) 1994 Feb 10 13:17:34 p15150407 kernel: Linux port (c) 1998 Building Number Three Ltd & Jan "Yenya" Kasprzak. Feb 10 13:17:34 p15150407 kernel: ide-floppy driver 0.97.sv Feb 10 13:17:34 p15150407 kernel: Highpoint HPT370 Softwareraid driver for linux version 0.01 Feb 10 13:17:34 p15150407 kernel: No raid array found Feb 10 13:17:34 p15150407 kernel: SCSI subsystem driver Revision: 1.00 Feb 10 13:17:34 p15150407 kernel: Red Hat/Adaptec aacraid driver, Apr 14 2002 Feb 10 13:17:34 p15150407 kernel: DC390: 0 adapters found Feb 10 13:17:34 p15150407 kernel: 3ware Storage Controller device driver for Linux v1.02.00.016. Feb 10 13:17:34 p15150407 kernel: 3w-xxxx: No cards with valid units found. Feb 10 13:17:34 p15150407 kernel: i2o_scsi.c: Version 0.0.1 Feb 10 13:17:34 p15150407 kernel: chain_pool: 0 bytes @ c13e4aa0 Feb 10 13:17:34 p15150407 kernel: (512 byte buffers X 4 can_queue X 0 i2o controllers) Feb 10 13:17:34 p15150407 kernel: NET4: Linux TCP/IP 1.0 for NET4.0 Feb 10 13:17:34 p15150407 kernel: IP Protocols: ICMP, UDP, TCP, IGMP Feb 10 13:17:34 p15150407 kernel: IP: routing cache hash table of 2048 buckets, 16Kbytes Feb 10 13:17:34 p15150407 kernel: TCP: Hash tables configured (established 16384 bind 16384) Feb 10 13:17:34 p15150407 kernel: NET4: Unix domain sockets 1.0/SMP for Linux NET4.0. Feb 10 13:17:34 p15150407 kernel: kjournald starting. Commit interval 5 seconds Feb 10 13:17:34 p15150407 kernel: EXT3-fs: mounted filesystem with ordered data mode. Feb 10 13:17:34 p15150407 kernel: VFS: Mounted root (ext3 filesystem) readonly. Feb 10 13:17:34 p15150407 kernel: Freeing unused kernel memory: 280k freed Feb 10 13:17:34 p15150407 kernel: Adding Swap: 257032k swap-space (priority -1) Feb 10 13:17:34 p15150407 kernel: EXT3 FS 2.4-0.9.17, 10 Jan 2002 on ide0(3,3), internal journal Feb 10 13:17:34 p15150407 kernel: via-rhine.c:v1.10-LK1.1.13 Nov-17-2001 Written by Donald Becker Feb 10 13:17:34 p15150407 kernel: http://www.scyld.com/network/via-rhine.html Feb 10 13:17:34 p15150407 kernel: eth0: VIA VT6102 Rhine-II at 0xe000, 00:40:63:c7:aa:e8, IRQ 23. Feb 10 13:17:34 p15150407 kernel: eth0: MII PHY found at address 1, status 0x786d advertising 05e1 Link 41e1. Feb 10 13:17:34 p15150407 kernel: kjournald starting. Commit interval 5 seconds Feb 10 13:17:34 p15150407 kernel: EXT3 FS 2.4-0.9.17, 10 Jan 2002 on ide0(3,1), internal journal Feb 10 13:17:34 p15150407 kernel: EXT3-fs: mounted filesystem with ordered data mode. Feb 10 13:17:34 p15150407 kernel: kjournald starting. Commit interval 5 seconds Feb 10 13:17:34 p15150407 kernel: EXT3 FS 2.4-0.9.17, 10 Jan 2002 on ide0(3,5), internal journal Feb 10 13:17:34 p15150407 kernel: EXT3-fs: mounted filesystem with ordered data mode. Feb 10 13:17:34 p15150407 kernel: kjournald starting. Commit interval 5 seconds Feb 10 13:17:34 p15150407 kernel: EXT3 FS 2.4-0.9.17, 10 Jan 2002 on ide0(3,6), internal journal Feb 10 13:17:34 p15150407 kernel: EXT3-fs: mounted filesystem with ordered data mode. Feb 10 13:17:34 p15150407 kernel: kjournald starting. Commit interval 5 seconds Feb 10 13:17:34 p15150407 kernel: EXT3 FS 2.4-0.9.17, 10 Jan 2002 on ide0(3,7), internal journal Feb 10 13:17:34 p15150407 kernel: EXT3-fs: mounted filesystem with ordered data mode. Feb 10 13:17:34 p15150407 kernel: kjournald starting. Commit interval 5 seconds Feb 10 13:17:34 p15150407 kernel: EXT3 FS 2.4-0.9.17, 10 Jan 2002 on ide0(3,Cool, internal journal Feb 10 13:17:34 p15150407 kernel: EXT3-fs: mounted filesystem with ordered data mode. Feb 10 13:17:34 p15150407 kernel: eth0: Setting full-duplex based on MII #1 link partner capability of 41e1. Feb 10 13:37:33 p15150407 -- MARK -- rescue:/mnt/var/log# Danke f�r alle Tips! Vlad -- Haeufig gestellte Fragen und Antworten (FAQ): http://www.de.debian.org/debian-user-german-FAQ/ Zum AUSTRAGEN schicken Sie eine Mail an [EMAIL PROTECTED] mit dem Subject "unsubscribe". Probleme? Mail an [EMAIL PROTECTED] (engl)
