--- snip ---

> mknod /dev/hdc b 22 0
>
> Das estellt das Device erneut fuer den Fall dass dein Brenner als
> Master am Sekundaeren IDE-Port haengt.
>
> Andrea

--- snap ---

Ne, das hats nicht gebracht. Hier mal ein paar Meldungen aus den Logs:

dmesg | grep -i scsi:

SCSI subsystem initialized
scsi0 : SCSI emulation for USB Mass Storage devices
usb-storage: Fixing INQUIRY data to show SCSI rev 2 - was 0
usb-storage: scsi cmd done, result=0x0
usb-storage: Fixing INQUIRY data to show SCSI rev 2 - was 0
usb-storage: scsi cmd done, result=0x0
  Type:   Direct-Access                      ANSI SCSI revision: 02
usb-storage: scsi cmd done, result=0x40000
usb-storage: scsi cmd done, result=0x40000
usb-storage: scsi cmd done, result=0x40000
usb-storage: scsi cmd done, result=0x40000
usb-storage: scsi cmd done, result=0x40000
usb-storage: scsi cmd done, result=0x40000
usb-storage: scsi cmd done, result=0x40000


dmesg | grep -i ide BIOS-provided physical RAM map: Kernel command line: auto BOOT_IMAGE=Linux ro root=305 hdc=ide-cd ide_setup: hdc=ide-cd CPU: After generic identify, caps: bfebf9ff 00000000 00000000 00000000 CPU: After vendor identify, caps: bfebf9ff 00000000 00000000 00000000 Uniform Multi-Platform E-IDE driver Revision: 7.00alpha2 ide: Assuming 33MHz system bus speed for PIO modes; override with idebus=xx ICH3M: IDE controller at PCI slot 0000:00:1f.1 ide0: BM-DMA at 0x1860-0x1867, BIOS settings: hda:DMA, hdb:pio ide1: BM-DMA at 0x1868-0x186f, BIOS settings: hdc:DMA, hdd:pio ide0 at 0x1f0-0x1f7,0x3f6 on irq 14 ide1 at 0x170-0x177,0x376 on irq 15 radeondb: BIOS provided dividers will be used

und last but not least:
dmesg | grep -i hdc
Kernel command line: auto BOOT_IMAGE=Linux ro root=305 hdc=ide-cd
ide_setup: hdc=ide-cd
    ide1: BM-DMA at 0x1868-0x186f, BIOS settings: hdc:DMA, hdd:pio
hdc: SONY CD-RW/DVD-ROM CRX820E, ATAPI CD/DVD-ROM drive




--
Haeufig gestellte Fragen und Antworten (FAQ): http://www.de.debian.org/debian-user-german-FAQ/


Zum AUSTRAGEN schicken Sie eine Mail an [EMAIL PROTECTED]
mit dem Subject "unsubscribe". Probleme? Mail an [EMAIL PROTECTED] (engl)



Antwort per Email an