Hallo, ich habe gerade meine neue externe Festplatte (160 GB, Samsung) bekommen, usb angeschlossen und debian hochgefahren.
aus dmesg entnehme ich, dass die Platte erkannt wurde, aber am Ende kommen timeout-error Meldungen (s.u.) wenn ich > cat /proc/scsi/scsi Attached devices: Host: scsi0 Channel: 00 Id: 00 Lun: 00 Vendor: MATSHITA Model: UJDA745 DVD/CDRW Rev: 1.02 Type: CD-ROM ANSI SCSI revision: 02 wird die Platte nicht angezeigt. mount -t vfat /dev/sda1 oder mkfs.ext3 /dev/sda1 funktioniert somit auch nicht, weil sda1 nicht da ist. wie bekomme ich die Platte zum Laufen? vielen Dank f�r Hinweise, Ciao Martin PCI: Found IRQ 11 for device 02:08.0 hub.c: new USB device 00:1d.1-1, assigned address 2 e100: selftest OK. e100: eth0: Intel(R) PRO/100 Network Connection Hardware receive checksums enabled Intel 810 + AC97 Audio, version 0.24, 18:08:21 Sep 19 2003 PCI: Found IRQ 11 for device 00:1f.5 PCI: Sharing IRQ 11 with 00:1f.3 PCI: Sharing IRQ 11 with 00:1f.6 PCI: Sharing IRQ 11 with 02:00.1 PCI: Setting latency timer of device 00:1f.5 to 64 i810: Intel ICH4 found at IO 0x18c0 and 0x1c00, MEM 0xc0000c00 and 0xc0000800, IRQ 11 i810: Intel ICH4 mmio at 0xe0c46c00 and 0xe0c48800 i810_audio: Primary codec has ID 0 i810_audio: Audio Controller supports 6 channels. i810_audio: Defaulting to base 2 channel mode. i810_audio: Resetting connection 0 i810_audio: Connection 0 with codec id 0 ac97_codec: AC97 Audio codec, id: ADS116 (Unknown) i810_audio: AC'97 codec 0 supports AMAP, total channels = 2 Linux agpgart interface v0.99 (c) Jeff Hartmann agpgart: Maximum main memory to use for agp memory: 439M agpgart: Detected Intel(R) 855PM chipset agpgart: AGP aperture is 256M @ 0xd0000000 NTFS driver v1.1.22 [Flags: R/W MODULE] [drm] AGP 0.99 aperture @ 0xd0000000 256MB [drm] Initialized radeon 1.7.0 20020828 on minor 0 ttyS0: LSR safety check engaged! ttyS0: LSR safety check engaged! ttyS1: LSR safety check engaged! ttyS1: LSR safety check engaged! usb_control/bulk_msg: timeout ip_tables: (C) 2000-2002 Netfilter core team ip_conntrack version 2.1 (4091 buckets, 32728 max) - 292 bytes per conntrack blk: queue c0334960, I/O limit 4095Mb (mask 0xffffffff) usb_control/bulk_msg: timeout cs: IO port probe 0x0c00-0x0cff: clean. cs: IO port probe 0x0800-0x08ff: clean. cs: IO port probe 0x0100-0x04ff: excluding 0x3b8-0x3df 0x4d0-0x4d7 cs: IO port probe 0x0a00-0x0aff: clean. usb_control/bulk_msg: timeout usb_control/bulk_msg: timeout usb_control/bulk_msg: timeout usb.c: USB device not responding, giving up (error=-110) hub.c: new USB device 00:1d.1-1, assigned address 3 PCI: Found IRQ 11 for device 01:00.0 PCI: Sharing IRQ 11 with 00:1d.0 PCI: Sharing IRQ 11 with 02:00.0 usb_control/bulk_msg: timeout usb_control/bulk_msg: timeout usb_control/bulk_msg: timeout usb_control/bulk_msg: timeout usb_control/bulk_msg: timeout usb.c: USB device not responding, giving up (error=-110) e100: eth0 NIC Link is Up 100 Mbps Full duplex hub.c: new USB device 00:1d.1-1, assigned address 4 usb_control/bulk_msg: timeout usb_control/bulk_msg: timeout usb_control/bulk_msg: timeout usb_control/bulk_msg: timeout usb_control/bulk_msg: timeout usb.c: USB device not responding, giving up (error=-110) hub.c: new USB device 00:1d.1-1, assigned address 5 usb_control/bulk_msg: timeout usb_control/bulk_msg: timeout usb_control/bulk_msg: timeout usb_control/bulk_msg: timeout usb_control/bulk_msg: timeout usb.c: USB device not responding, giving up (error=-110) -- ----- please send me a CC when replying
