On 22.08.2004 10:35, Bjoern Schmidt wrote:
K�nntest Du bitte die vollst�ndige Ausgabe von dmesg posten oder direkt an mich
mailen?
Klar (s.u.)
Ich habe mittlerweile folgendes versucht:
- mit acpi=off booten - kein Erfolg
- Kernel meldet ja, das ACPI deisabled ist, also mit acpi=force gebotet - kein Erfolg
- im BIOS PnP OS von NO auf YES geanedert - kein Erfolg
Ich habe vorhin gesehen, dass USB wohl genau den IRQ hat, den die Netzwerkkarte will und die Netzwerkkarte genau den will, den USB hat:
> PCI: Found IRQ 11 for device 0000:00:13.0 > IRQ routing conflict for 0000:00:13.0, have irq 15, want irq 11 > ohci_hcd 0000:00:13.0: Compaq Computer Corporation ZFMicro Chipset USB
und
> PCI: Found IRQ 15 for device 0000:00:0d.0 > IRQ routing conflict for 0000:00:0d.0, have irq 11, want irq 15 > eth0: RealTek RTL8139 at 0xe000, 00:10:dc:5f:56:2d, IRQ 11
Im Bios kann ich die IRQs aber nicht direkt vergeben ... das einzige was ich einstellen / umstellen kann ist entweder Auto, oder zwischen PnP PCI und ISA waehlen.
Linux version 2.6.7-1-386 ([EMAIL PROTECTED]) (gcc version 3.3.4 (Debian 1:3.3.4-2)) #1 Thu Jul 8 05:08:04 EDT 2004 BIOS-provided physical RAM map: BIOS-e820: 0000000000000000 - 00000000000a0000 (usable) BIOS-e820: 00000000000f0000 - 0000000000100000 (reserved) BIOS-e820: 0000000000100000 - 0000000003c00000 (usable) BIOS-e820: 00000000ffff0000 - 0000000100000000 (reserved) 60MB LOWMEM available. On node 0 totalpages: 15360 DMA zone: 4096 pages, LIFO batch:1 Normal zone: 11264 pages, LIFO batch:2 HighMem zone: 0 pages, LIFO batch:1 DMI 2.2 present. ACPI disabled because your bios is from 00 and too old You can enable it with acpi=force Built 1 zonelists Kernel command line: root=/dev/sda1 ro No local APIC present or hardware disabled Initializing CPU#0 PID hash table entries: 256 (order 8: 2048 bytes) Detected 200.477 MHz processor. Using tsc for high-res timesource Console: colour VGA+ 80x25 Memory: 53660k/61440k available (1309k kernel code, 7328k reserved, 701k data, 204k init, 0k highmem) Checking if this processor honours the WP bit even in supervisor mode... Ok. Calibrating delay loop... 327.68 BogoMIPS Security Scaffold v1.0.0 initialized Dentry cache hash table entries: 8192 (order: 3, 32768 bytes) Inode-cache hash table entries: 4096 (order: 2, 16384 bytes) Mount-cache hash table entries: 512 (order: 0, 4096 bytes) CPU: After generic identify, caps: 00808131 01818131 00000000 00000000 CPU: After vendor identify, caps: 00808131 01818131 00000000 00000000 Working around Cyrix MediaGX virtual DMA bugs. Enable Memory-Write-back mode on Cyrix/NSC processor. Enable Memory access reorder on Cyrix/NSC processor. Enable Incrementor on Cyrix/NSC processor. CPU: After all inits, caps: 00808131 00818131 00000000 00000001 CPU: Cyrix MediaGXtm MMXtm Enhanced stepping 04 Checking 'hlt' instruction... OK. Checking for popad bug... OK. checking if image is initramfs...it isn't (ungzip failed); looks like an initrd Freeing initrd memory: 4352k freed NET: Registered protocol family 16 EISA bus registered PCI: PCI BIOS revision 2.10 entry at 0xfb200, last bus=0 PCI: Using configuration type 1 mtrr: v2.0 (20020519) ACPI: Subsystem revision 20040326 ACPI: Interpreter disabled. Linux Plug and Play Support v0.97 (c) Adam Belay PnPBIOS: Scanning system for PnP BIOS support... PnPBIOS: Found PnP BIOS installation structure at 0xc00fbe30 PnPBIOS: PnP BIOS version 1.0, entry 0xf0000:0xbe58, dseg 0xf0000 pnp: 00:0d: ioport range 0x400-0x407 has been reserved pnp: 00:0d: ioport range 0x800-0x807 has been reserved pnp: 00:0d: ioport range 0x500-0x507 has been reserved pnp: 00:0d: ioport range 0x510-0x51f has been reserved pnp: 00:0d: ioport range 0xac80-0xac85 has been reserved pnp: 00:0d: ioport range 0xac90-0xac9f has been reserved PnPBIOS: 15 nodes reported by PnP BIOS; 15 recorded by driver PCI: Probing PCI hardware PCI: Probing PCI hardware (bus 00) PCI: Using IRQ router NatSemi [1078/0100] at 0000:00:12.0 VFS: Disk quotas dquot_6.5.1 Dquot-cache hash table entries: 1024 (order 0, 4096 bytes) devfs: 2004-01-31 Richard Gooch ([EMAIL PROTECTED]) devfs: boot_options: 0x0 Initializing Cryptographic API isapnp: Scanning for PnP cards... isapnp: No Plug & Play device found Serial: 8250/16550 driver $Revision: 1.90 $ 54 ports, IRQ sharing enabled ttyS0 at I/O 0x3f8 (irq = 4) is a 16550A ttyS1 at I/O 0x2f8 (irq = 3) is a 16550A RAMDISK driver initialized: 16 RAM disks of 8192K size 1024 blocksize serio: i8042 AUX port at 0x60,0x64 irq 12 serio: i8042 KBD port at 0x60,0x64 irq 1 input: AT Translated Set 2 keyboard on isa0060/serio0 EISA: Probing bus 0 at eisa0 NET: Registered protocol family 2 IP: routing cache hash table of 512 buckets, 4Kbytes TCP: Hash tables configured (established 4096 bind 8192) NET: Registered protocol family 8 NET: Registered protocol family 20 RAMDISK: cramfs filesystem found at block 0 RAMDISK: Loading 4352 blocks [1 disk] into ram disk... done. VFS: Mounted root (cramfs filesystem) readonly. Freeing unused kernel memory: 204k freed usbcore: registered new driver usbfs usbcore: registered new driver hub ohci_hcd: 2004 Feb 02 USB 1.1 'Open' Host Controller (OHCI) Driver (PCI) ohci_hcd: block sizes: ed 64 td 64 PCI: Found IRQ 11 for device 0000:00:13.0 IRQ routing conflict for 0000:00:13.0, have irq 15, want irq 11 ohci_hcd 0000:00:13.0: Compaq Computer Corporation ZFMicro Chipset USB ohci_hcd 0000:00:13.0: irq 15, pci mem c480d000 ohci_hcd 0000:00:13.0: new USB bus registered, assigned bus number 1 hub 1-0:1.0: USB hub found hub 1-0:1.0: 2 ports detected usb 1-1: new full speed USB device using address 2 Uniform Multi-Platform E-IDE driver Revision: 7.00alpha2 ide: Assuming 33MHz system bus speed for PIO modes; override with idebus=xx SCSI subsystem initialized Initializing USB Mass Storage driver... scsi0 : SCSI emulation for USB Mass Storage devices Using anticipatory io scheduler Vendor: Genesys Model: USB to IDE Disk Rev: 0002 Type: Direct-Access ANSI SCSI revision: 02 USB Mass Storage device found at 2 usbcore: registered new driver usb-storage USB Mass Storage support registered. SCSI device sda: 12685680 512-byte hdwr sectors (6495 MB) sda: assuming Write Enabled sda: assuming drive cache: write through /dev/scsi/host0/bus0/target0/lun0: p1 p2 Attached scsi removable disk sda at scsi0, channel 0, id 0, lun 0 vesafb: probe of vesafb0 failed with error -6 NET: Registered protocol family 1 SGI XFS with ACLs, security attributes, realtime, large block numbers, no debug enabled SGI XFS Quota Management subsystem ext3: No journal on filesystem on sda1 Adding 285188k swap on /dev/sda2. Priority:-1 extents:1 Real Time Clock Driver v1.12 hda: PQI SSD FLASH DISK Rev.P201BET2-B, ATA DISK drive ide0 at 0x1f0-0x1f7,0x3f6 on irq 14 8139too Fast Ethernet driver 0.9.27 PCI: Found IRQ 15 for device 0000:00:0d.0 IRQ routing conflict for 0000:00:0d.0, have irq 11, want irq 15 eth0: RealTek RTL8139 at 0xe000, 00:10:dc:5f:56:2d, IRQ 11 eth0: Identified 8139 chip type 'RTL-8139B' apm: BIOS version 1.2 Flags 0x03 (Driver version 1.16ac) input: PC Speaker ip_conntrack version 2.1 (480 buckets, 3840 max) - 296 bytes per conntrack ip_tables: (C) 2000-2002 Netfilter core team Capability LSM initialized hda: max request size: 128KiB hda: 31360 sectors (16 MB) w/1KiB Cache, CHS=490/2/32 /dev/ide/host0/bus0/target0/lun0: p1 eth0: link up, 100Mbps, full-duplex, lpa 0x45E1
Noch irgend eine Idee?
Danke schonmal
Christian
-- To reply to this posting directly use the following address and remove the 'NO-SPAM' part: [EMAIL PROTECTED]
--
Haeufig gestellte Fragen und Antworten (FAQ): http://www.de.debian.org/debian-user-german-FAQ/
Zum AUSTRAGEN schicken Sie eine Mail an [EMAIL PROTECTED] mit dem Subject "unsubscribe". Probleme? Mail an [EMAIL PROTECTED] (engl)
