On Thu, 3 Mar 2005 13:58:45 +0100, Wiktor Bauer <[EMAIL PROTECTED]> wrote: > Witam, > > zdecydowaÅem siÄ napisaÄ na grupÄ bo juÅ nie mogÄ. > Mam maszynÄ na pÅycie Intel SAI2 w obudowie 2U > Na pÅycie jest karta sieciowa zintegrowana (OK) > ChcÄ zrobiÄ z niego router, wiÄc dokupiÅem dwie sieciÃwki Intel pro100 > wkÅadam do slotÃw (na pierwszym PCI jest takie rozszerzenie z jednego robi > dwa ). Stwaiam Sarge i widzÄ tylko tÄ na pÅycie i jednÄ wÅoÅonÄ do > slotu a > drugiej ni cholery. MoÅe ktoÅ wie gdzie szukaÄ. > kernel 2.6.8-2 > > Po lspci dostajÄ > > 0000:00:00.0 Host bridge: ServerWorks CNB20LE Host Bridge (rev 06) > 0000:00:00.1 Host bridge: ServerWorks CNB20LE Host Bridge (rev 06) > 0000:00:02.0 VGA compatible controller: ATI Technologies Inc Rage XL (rev 27) > 0000:00:03.0 Ethernet controller: Intel Corp. 82557/8/9 [Ethernet Pro 100] > (rev 08) > 0000:00:06.0 Ethernet controller: Intel Corp. 82557/8/9 [Ethernet Pro 100] > (rev 08) > 0000:00:0f.0 ISA bridge: ServerWorks CSB5 South Bridge (rev 93) > 0000:00:0f.1 IDE interface: ServerWorks CSB5 IDE Controller (rev 93) > 0000:00:0f.2 USB Controller: ServerWorks OSB4/CSB5 OHCI USB Controller (rev > 05) > 0000:00:0f.3 Host bridge: ServerWorks CSB5 LPC bridge > > Po lshw (wycinek) > > *-pci > description: Host bridge > product: CSB5 LPC bridge > vendor: ServerWorks > physical id: 100 > bus info: [EMAIL PROTECTED]:0f.3 > version: 00 > clock: 33MHz > *-network:0 > description: Ethernet controller > product: 82557/8/9 [Ethernet Pro 100] > vendor: Intel Corp. > physical id: 3 > bus info: [EMAIL PROTECTED]:03.0 > version: 08 > clock: 33MHz > capabilities: bus_master cap_list > configuration: driver=e100 irq=169 > *-network:1 > description: Ethernet controller > product: 82557/8/9 [Ethernet Pro 100] > vendor: Intel Corp. > physical id: 6 > bus info: [EMAIL PROTECTED]:06.0 > version: 08 > clock: 33MHz > capabilities: bus_master cap_list > configuration: driver=e100 irq=177 > *-network:0 > description: Ethernet controller > physical id: 1 > logical name: eth0 > serial: 00:03:47:a6:2a:d6 > capabilities: ethernet > configuration: broadcast=yes ip=192.168.1.254 multicast=yes > *-network:1 DISABLED > description: Ethernet controller > physical id: 2 > logical name: eth1 > serial: 00:0e:0c:5d:d8:85 > capabilities: ethernet > configuration: broadcast=yes multicast=yes > sory za trywialne pytanie ,ale co daje modprobe eepro100 i ifconfig -a ?
-- Pozdrawiam, Wojciech Ziniewicz Powered by google.com [EMAIL PROTECTED] Visit #gore at irc.freenode.net
