Witam Będąc w USA kupiłem sobie Zaurus. Chciałbym go podłączyć teraz do moje kompa. Przeczytałem instrukcje, zrobiłem wszystko jak trzeba ale coś nie działa.
Komenda ifup usb0 daje coś takiego: mruczus:/etc# ifup usb0 Internet Software Consortium DHCP Client 2.0pl5 Copyright 1995, 1996, 1997, 1998, 1999 The Internet Software Consortium. All rights reserved. Please contribute if you find this software useful. For info, please visit http://www.isc.org/dhcp-contrib.html Listening on LPF/usb0/ba:9c:a8:a1:6b:b0 Sending on LPF/usb0/ba:9c:a8:a1:6b:b0 Sending on Socket/fallback/fallback-net DHCPREQUEST on usb0 to 255.255.255.255 port 67 ip length 328 disagrees with bytes received 332. accepting packet with data after udp payload. DHCPACK from 192.168.129.201 bound to 192.168.129.1 -- renewal in 300 seconds. iptables v1.2.8: can't initialize iptables table ilter': Table does not exist (do you need to insmod?) Perhaps iptables or your kernel needs to be upgraded. iptables v1.2.8: can't initialize iptables table ilter': Table does not exist (do you need to insmod?) Perhaps iptables or your kernel needs to be upgraded. iptables v1.2.8: invalid mask ' specified Try ptables -h' or 'iptables --help' for more information. iptables v1.2.8: invalid mask ' specified Try ptables -h' or 'iptables --help' for more information. iptables v1.2.8: invalid mask ' specified Try ptables -h' or 'iptables --help' for more information. run-parts: /etc/network/if-up.d/50zaurus exited with return code 2 lsmod: [EMAIL PROTECTED]:~$ lsmod Module Size Used by Not tainted sg 28540 0 (autoclean) ide-cd 32032 0 (autoclean) sr_mod 15640 0 (autoclean) cdrom 28256 0 (autoclean) [ide-cd sr_mod] iptable_nat 17198 0 (autoclean) (unused) ip_conntrack 20356 1 (autoclean) [iptable_nat] ip_tables 12032 3 [iptable_nat] mga 97404 2 autofs4 10228 2 (autoclean) usb-ohci 19656 0 (unused) ne2k-pci 5664 1 8390 6880 0 [ne2k-pci] ide-scsi 10224 0 scsi_mod 59924 3 [sg sr_mod ide-scsi] serial 46500 0 (autoclean) usbnet 13918 1 usbcore 41220 0 [usb-ohci usbnet] es1370 27148 1 soundcore 4036 4 [es1370] rtc 7400 0 (autoclean) zaś /etc/network/if-up.d/50zaurus (zgodnie z instrukcją) #!/bin/sh case $IFACE in usb0) echo 1 > /proc/sys/net/ipv4/ip_forward iptables -t filter -F FORWARD iptables -t filter -P FORWARD DROP iptables -t filter -A FORWARD -s $IF_POINTOPOINT/$IF_NETMASK -j ACCEPT iptables -t filter -A FORWARD -d $IF_POINTOPOINT/$IF_NETMASK -j ACCEPT iptables -t nat -F PREROUTING iptables -t nat -P PREROUTING ACCEPT iptables -t nat -F POSTROUTING iptables -t nat -P POSTROUTING ACCEPT iptables -t nat -F OUTPUT iptables -t nat -P OUTPUT ACCEPT iptables -t nat -A POSTROUTING -s $IF_POINTOPOINT/$IF_NETMASK -o eth0 -j MA ;; esac Co jest nie tak? Wawrzyniec Niewodniczański
