Witam! Postanowilem ze teraz zajme sie odpaleniem filmow w Linuxie.. Probowalem najpierw kompilowac Mplayer ze stronki autora, ale cos zawsze brakowalo juz przy ./configure to zainstalowalem apt-get'em z deb http://marillat.free.fr/ unstable main.
pomijam juz ze nie odpala gui, jak odpalam z konsoli mam: MPlayer 1.0pre3-3.3.3 (C) 2000-2003 MPlayer Team CPU: Advanced Micro Devices Athlon MP/XP/XP-M Barton 2163 MHz (Family: 6, Stepping: 0) Detected cache-line size is 64 bytes MMX2 supported but disabled 3DNow supported but disabled 3DNowExt supported but disabled CPUflags: MMX: 1 MMX2: 0 3DNow: 0 3DNow2: 0 SSE: 1 SSE2: 0 Compiled for x86 CPU with extensions: MMX SSE Reading config file /etc/mplayer/mplayer.conf Reading config file /root/.mplayer/config Reading /root/.mplayer/codecs.conf: This codecs.conf is too old and incompatible with this MPlayer release! at line 15 Reading /etc/mplayer/codecs.conf: 61 audio & 169 video codecs font: can't open file: /root/.mplayer/font/font.desc font: can't open file: /usr/share/mplayer/font/font.desc Using Linux hardware RTC timing (1024Hz). Input config file /root/.mplayer/input.conf parsed: 52 binds Opening joystick device /dev/input/js0 Can't open joystick device /dev/input/js0 : No such device Can't init input joystick Setting up LIRC support... mplayer: could not connect to socket mplayer: No such file or directory Failed to open LIRC support. You will not be able to use your remote control. Playing /mnt/E/Porno/porno.(1989).[pindur].(osloskop.net).avi. Cache fill: 0.00% (0 bytes) AVI file format detected. VIDEO: [DX50] 640x456 24bpp 25.000 fps 1000.4 kbps (122.1 kbyte/s) Clip info: Software: VirtualDubMod 1.4.13 ========================================================================== Opening audio decoder: [mp3lib] MPEG layer-2, layer-3 MP3lib: init layer2&3 finished, tables done AUDIO: 48000 Hz, 2 ch, 16 bit (0x10), ratio: 12000->192000 (96.0 kbit) Selected audio codec: [mp3] afm:mp3lib (mp3lib MPEG layer-2, layer-3) ========================================================================== vo: couldn't open the X11 display ()! Error opening/initializing the selected video_out (-vo) device. Exiting... (End of file) I tu mnie intryguje ten problem z X11, bo tez go mialem podczas instalacji ze zrodelek. O co w tym chodzi? To jest wersja 1.0 Mplayera, a plik codecs.conf podkopiowalem od 0.91 i tu tez sie burzy o to. Poza tym nie mam pliku gui.conf.. a tez by sie przydal. Jaka ma byc jego zawartosc. Dzieki za pomoc. pszemaz
