Ok stery zainstalowaly sie! :) Teraz pozostalo jedno
mam LCD Neovo F-419 "19" calowy chce miec
rozdzielczosc 1280x1024 a mam 1024x768 i nie moge
zmienic na wieksza! moj XF86Config-4 wyglada tak:
# XF86Config-4 (XFree86 X Window System server
configuration file)
#
# This file was generated by dexconf, the Debian X
Configuration tool, using
# values from the debconf database.
#
# Edit this file with caution, and see the
XF86Config-4 manual page.
# (Type "man XF86Config-4" at the shell prompt.)
#
# This file is automatically updated on
xserver-xfree86 package upgrades *only*
# if it has not been modified since the last upgrade
of the xserver-xfree86
# package.
#
# If you have edited this file but would like it to be
automatically updated
# again, run the following commands as root:
#
# cp /etc/X11/XF86Config-4
/etc/X11/XF86Config-4.custom
# md5sum /etc/X11/XF86Config-4
>/var/lib/xfree86/XF86Config-4.md5sum
# dpkg-reconfigure xserver-xfree86
Section "Files"
FontPath "unix/:7100" # local font server
# if the local font server has problems, we can fall
back on these
FontPath "/usr/lib/X11/fonts/misc"
FontPath "/usr/lib/X11/fonts/cyrillic"
FontPath "/usr/lib/X11/fonts/100dpi/:unscaled"
FontPath "/usr/lib/X11/fonts/75dpi/:unscaled"
FontPath "/usr/lib/X11/fonts/Type1"
FontPath "/usr/lib/X11/fonts/CID"
FontPath "/usr/lib/X11/fonts/Speedo"
FontPath "/usr/lib/X11/fonts/100dpi"
FontPath "/usr/lib/X11/fonts/75dpi"
EndSection
Section "Module"
Load "GLcore"
Load "bitmap"
Load "dbe"
Load "ddc"
Load "dri"
Load "extmod"
Load "freetype"
Load "glx"
Load "int10"
Load "record"
Load "speedo"
Load "type1"
Load "vbe"
EndSection
Section "InputDevice"
Identifier "Generic Keyboard"
Driver "keyboard"
Option "CoreKeyboard"
Option "XkbRules" "xfree86"
Option "XkbModel" "pc105"
Option "XkbLayout" "pl"
Option "XkbVariant" "polish"
EndSection
Section "InputDevice"
Identifier "Configured Mouse"
Driver "mouse"
Option "CorePointer"
Option "Device" "/dev/input/mice"
Option "Protocol" "ImPS/2"
Option "Emulate3Buttons" "true"
Option "ZAxisMapping" "4 5"
EndSection
Section "Device"
Identifier "Generic Video Card"
Driver "nvidia"
Option "UseFBDev" "true"
EndSection
Section "Monitor"
Identifier "Generic Monitor"
HorizSync 28-50
VertRefresh 43-75
Option "DPMS"
EndSection
Section "Screen"
Identifier "Default Screen"
Device "Generic Video Card"
Monitor "Generic Monitor"
DefaultDepth 24
SubSection "Display"
Depth 1
Modes "1280x1024"
EndSubSection
SubSection "Display"
Depth 4
Modes "1280x1024"
EndSubSection
SubSection "Display"
Depth 8
Modes "1280x1024"
EndSubSection
SubSection "Display"
Depth 15
Modes "1280x1024"
EndSubSection
SubSection "Display"
Depth 16
Modes "1280x1024"
EndSubSection
SubSection "Display"
Depth 24
Modes "1280x1024"
EndSubSection
EndSection
Section "ServerLayout"
Identifier "Default Layout"
Screen "Default Screen"
InputDevice "Generic Keyboard"
InputDevice "Configured Mouse"
EndSection
Section "DRI"
Mode 0666
EndSection
rebootowalem ale nic sie nie zmienia nie chce znienic
rozdzielczosci? Wlasciwie nie wiem co mam teraz
zrobic. Jak sie wejdzie do centrum sterowania to sa
wszystkie rozdzielczosci do 1024x768 a na 19 calowym
LCD nie wyglada to najlepiej. Prosze o wskazowki.
Dziekuje za pomoc przy instalacji ktora sie powiodla
:):)!!!
Pozdrawiam Serdecznie Damian Chorazkiewicz
__________________________________________________
Do You Yahoo!?
Tired of spam? Yahoo! Mail has the best spam protection around
http://mail.yahoo.com
--
To UNSUBSCRIBE, email to [EMAIL PROTECTED]
with a subject of "unsubscribe". Trouble? Contact [EMAIL PROTECTED]
