A velha confusão... Enviei somente para o Rodolfo, e não para a lista. Encaminhando...
-------- Mensagem encaminhada -------- > De: Krishnamurti L. L. V. Nunes <[EMAIL PROTECTED]> > Para: Rodolfo Allan <[EMAIL PROTECTED]> > Assunto: Re: Direct Render carregado mas não funciona. > Data: Mon, 16 Jul 2007 09:12:49 -0300 > > Em Sáb, 2007-07-14 às 10:35 -0400, Rodolfo Allan escreveu: > > Olha só, eu instalei o driver radeon, acertei o xorg.conf do jeito que > > pedem: > > > > Section "Device" > > Identifier "ATI Radeon 9600 Pro" > > Driver "radeon" > > BusID "PCI:1:0:0" > > Option "AGPMode" "8" > > Option "XAANoOffscreenPixmaps" "true" > > Option "AddARGBGLXVisuals" "true" > > Option "AllowGLXWithComposite" "true" > > Option "DisableGLXRootClipping" "true" > > Option "AccelMethod" "XXA" > > Option "EnablePageFlip" "true" > > Option "ColorTiling" "true" > > EndSection > > > > (...) > > > > Section "DRI" > > Mode 0666 > > EndSection > > > > Section "Extensions" > > Option "Composite" "Enable" > > EndSection > > > > [AIGLX está ativado também] > > > > Até ai, ok, mas quando digito glxinfo | grep direct, retorna: > > $ glxinfo | grep direct > > direct rendering: No > > > Isso não é realmente um problema; me lembro que isso acontecia no Etch. > Com o Lenny ou SiD essa confusão não acontece. > > O caso é que o gxinfo procura pelo seu driver de vídeo na > pasta /usr/X11R6/lib/modules/dri/ , mas ele na verdade está > em /usr/lib/dri/. (verifique se o gxlinfo não faz referência a isso) > > Então apesar a aceleração 3d estar instalada e funcionando, o glxinfo > diz Direct rendering: no. > > Pra corrigir isso, vc pode fazer algo como: > # ln -s /usr/lib/dri/r300_dri.so /usr/X11R6/lib/modules/dri/r300_dri.so > (adapte para você!) > > Infelizmente acho que isso não ajuda a funcionar o Compozite :-( > > > > > Não sei o que há de errado, no Xorg.0.log diz que o Direct Render foi > > carregado: > > > > $ cat /var/log/Xorg.0.log | grep render > > (II) RADEON(0): Direct rendering enabled > > > > Procurei por algum erro, simplesmente não há erros, tudo parece certo > > a respeito do DRI e do DRM > > > > $ cat /var/log/Xorg.0.log | grep dri > > X.Org XInput driver : 0.7 > > (II) LoadModule: "dri" > > (II) Loading /usr/lib/xorg/modules/extensions//libdri.so > > (II) Module dri: vendor="X.Org Foundation" > > (II) Loading /usr/lib/xorg/modules/drivers//radeon_drv.so > > (II) Loading /usr/lib/xorg/modules/drivers//ati_drv.so > > ABI class: X.Org XInput driver, version 0.6 > > ABI class: X.Org XInput driver, version 0.7 > > (II) ATI: ATI driver (version 6.6.3) for chipsets: ati, ativga > > (II) Reloading /usr/lib/xorg/modules/drivers//radeon_drv.so > > drmOpenDevice: node name is /dev/dri/card0 > > drmOpenDevice: node name is /dev/dri/card0 > > (II) RADEON(0): [dri] Found DRI library version 1.3.0 and kernel > > module version 1.25.0 > > drmOpenDevice: node name is /dev/dri/card0 > > drmOpenDevice: node name is /dev/dri/card0 > > drmOpenDevice: node name is /dev/dri/card0 > > (II) RADEON(0): [drm] created "radeon" driver at busid "pci:0000:01:00.0" > > (II) RADEON(0): [dri] Visual configs initialized > > drmOpenDevice: node name is /dev/dri/card0 > > drmOpenDevice: node name is /dev/dri/card0 > > (WW) AIGLX: 3D driver claims to not support visual 0x23 > > (WW) AIGLX: 3D driver claims to not support visual 0x24 > > (WW) AIGLX: 3D driver claims to not support visual 0x25 > > (WW) AIGLX: 3D driver claims to not support visual 0x26 > > (WW) AIGLX: 3D driver claims to not support visual 0x27 > > (WW) AIGLX: 3D driver claims to not support visual 0x28 > > (WW) AIGLX: 3D driver claims to not support visual 0x29 > > (WW) AIGLX: 3D driver claims to not support visual 0x2a > > (WW) AIGLX: 3D driver claims to not support visual 0x2b > > (WW) AIGLX: 3D driver claims to not support visual 0x2c > > (WW) AIGLX: 3D driver claims to not support visual 0x2d > > (WW) AIGLX: 3D driver claims to not support visual 0x2e > > (WW) AIGLX: 3D driver claims to not support visual 0x2f > > (WW) AIGLX: 3D driver claims to not support visual 0x30 > > (WW) AIGLX: 3D driver claims to not support visual 0x31 > > (WW) AIGLX: 3D driver claims to not support visual 0x32 > > (II) AIGLX: Loaded and initialized /usr/lib/dri/r300_dri.so > > > > $ cat /var/log/Xorg.0.log | grep drm > > drmOpenDevice: node name is /dev/dri/card0 > > drmOpenDevice: open result is 7, (OK) > > drmOpenByBusid: Searching for BusID pci:0000:01:00.0 > > drmOpenDevice: node name is /dev/dri/card0 > > drmOpenDevice: open result is 7, (OK) > > drmOpenByBusid: drmOpenMinor returns 7 > > drmOpenByBusid: drmGetBusid reports pci:0000:01:00.0 > > drmOpenDevice: node name is /dev/dri/card0 > > drmOpenDevice: open result is 7, (OK) > > drmOpenDevice: node name is /dev/dri/card0 > > drmOpenDevice: open result is 7, (OK) > > drmOpenByBusid: Searching for BusID pci:0000:01:00.0 > > drmOpenDevice: node name is /dev/dri/card0 > > drmOpenDevice: open result is 7, (OK) > > drmOpenByBusid: drmOpenMinor returns 7 > > drmOpenByBusid: drmGetBusid reports pci:0000:01:00.0 > > (II) RADEON(0): [drm] DRM interface version 1.2 > > (II) RADEON(0): [drm] created "radeon" driver at busid "pci:0000:01:00.0" > > (II) RADEON(0): [drm] added 8192 byte SAREA at 0xf8dd6000 > > (II) RADEON(0): [drm] mapped SAREA 0xf8dd6000 to 0xb7b32000 > > (II) RADEON(0): [drm] framebuffer handle = 0xc0000000 > > (II) RADEON(0): [drm] added 1 reserved context for kernel > > (II) RADEON(0): [drm] register handle = 0xe9000000 > > (II) RADEON(0): [drm] installed DRM signal handler > > (II) RADEON(0): [drm] Added 32 65536 byte vertex/indirect buffers > > (II) RADEON(0): [drm] Mapped 32 vertex/indirect buffers > > (II) RADEON(0): [drm] dma control initialized, using IRQ 201 > > (II) RADEON(0): [drm] Initialized kernel GART heap manager, 5111808 > > drmOpenDevice: node name is /dev/dri/card0 > > drmOpenDevice: open result is 8, (OK) > > drmOpenByBusid: Searching for BusID pci:0000:01:00.0 > > drmOpenDevice: node name is /dev/dri/card0 > > drmOpenDevice: open result is 8, (OK) > > drmOpenByBusid: drmOpenMinor returns 8 > > drmOpenByBusid: drmGetBusid reports pci:0000:01:00.0 > > > > Já cansei de procurar uma solução, imploro por uma ajuda!!! > > > > O log é meio grande pra anexar aqui, se precisar eu mando. > > Acho que será necessário :-p > > > > > Obrigado desde já! > > Rodolfo. > > > > -- > Krishna > -- To UNSUBSCRIBE, email to [EMAIL PROTECTED] with a subject of "unsubscribe". Trouble? Contact [EMAIL PROTECTED]
