Olá Saul,
normalmente eu vejo ser reconhecido como /dev/sdX. Você pode conferir
no /var/log/messages:
[EMAIL PROTECTED]:/var/log# tail -n 20 messages
Dec 1 21:57:25 marcellobm kernel: [43903.926784] usb 1-5: new high speed USB
device using ehci_hcd and address 3
Dec 1 21:57:25 marcellobm kernel: [43904.043325] usb 1-5: configuration #1
chosen from 1 choice
Dec 1 21:57:26 marcellobm kernel: [43904.892732] usbcore: registered new
interface driver libusual
Dec 1 21:57:26 marcellobm kernel: [43904.955343] Uniform Multi-Platform E-IDE
driver Revision: 7.00alpha2
Dec 1 21:57:26 marcellobm kernel: [43904.955352] ide: Assuming 33MHz system
bus speed for PIO modes; override with idebus=xx
Dec 1 21:57:26 marcellobm kernel: [43905.017857] Initializing USB Mass Storage
driver...
Dec 1 21:57:26 marcellobm kernel: [43905.019635] scsi2 : SCSI emulation for
USB Mass Storage devices
Dec 1 21:57:26 marcellobm kernel: [43905.021500] usbcore: registered new
interface driver usb-storage
Dec 1 21:57:26 marcellobm kernel: [43905.021507] USB Mass Storage support
registered.
Dec 1 21:57:31 marcellobm kernel: [43910.019553] scsi 2:0:0:0: Direct-Access
Kingston DataTraveler 2.0 PMAP PQ: 0 ANSI: 0 CCS
Dec 1 21:57:32 marcellobm kernel: [43910.261446] sd 2:0:0:0: [sdb] 4030464
512-byte hardware sectors (2064 MB)
Dec 1 21:57:32 marcellobm kernel: [43910.262318] sd 2:0:0:0: [sdb] Write
Protect is off
Dec 1 21:57:32 marcellobm kernel: [43910.264814] sd 2:0:0:0: [sdb] 4030464
512-byte hardware sectors (2064 MB)
Dec 1 21:57:32 marcellobm kernel: [43910.265563] sd 2:0:0:0: [sdb] Write
Protect is off
Dec 1 21:57:32 marcellobm kernel: [43910.265577] sdb: sdb1
Dec 1 21:57:32 marcellobm kernel: [43910.266768] sd 2:0:0:0: [sdb] Attached
SCSI removable disk
Dec 1 21:57:32 marcellobm kernel: [43910.266813] sd 2:0:0:0: Attached scsi
generic sg2 type 0
[EMAIL PROTECTED]:/var/log# mount
/dev/sdb1 on /media/disk type vfat
(rw,nosuid,nodev,shortname=mixed,uid=1000,utf8,umask=077,usefree)
Depois disso, eh só: mkfs.vfat /dev/<qualquer_coisa>
On Sat, 1 Dec 2007 20:51:45 -0300
"Saul Lima" <[EMAIL PROTECTED]> wrote:
> Como não tenho pen drive nunca tive esta dúvida, mas agora meu irmão pediu
> que eu formatasse seu pen drive aqui na minha máquina... Como posso
> formatá-lo em meu debian etch r1? tenho que dar um mkfs em qual dispositivo
> em dev?
>
> Estou googleando, mas nenhuma resposta até agora....
--
------------------------------
Marcello Barreto de Medeiros
Network Admin/Programmer
+55 84 3231 4617 [Office]
+55 84 9914 3254 [Mobile]
[EMAIL PROTECTED] [MSN]
Linconet Brasil
------------------------------
