Não sei se ajuda adiagnosticar o problema mas estou inviando assim mesmo debian:~# iptables -t nat -L Chain PREROUTING (policy ACCEPT) target prot opt source destination
Chain POSTROUTING (policy ACCEPT) target prot opt source destination MASQUERADE all -- anywhere anywhere Chain OUTPUT (policy ACCEPT) target prot opt source destinatio Em 24/06/09, alan inacio<[email protected]> escreveu: > sim após as alterações efetuei o restart.. sim sou iniciante em linux > e estou curtindo muito configurar ele. > > Segue as configurações > > Abraço. > > > Arquivo: /etc/iftab > > eth0 mac 00:07:95:d5:9d:ba > eth1 mac 00:05:00:a0:05:d3 > > > Arquivo: /etc/dhcp3/dhcpd.conf > > ddns-update-style none; > > default-lease-time 600; > max-lease-time 7200; > > authoritative; > > subnet 192.168.0.0 netmask 255.255.255.0 { > range 192.168.0.5 192.168.0.100; > option routers 192.168.0.2; > option domain-name-servers 200.204.0.10,200.204.0.138; > option broadcast-address 192.168.0.255; > } > > > Arquivo: /etc/network/interfaces > > auto lo > iface lo inet loopback > > # Rede Local > > auto eth0 > iface eth0 inet static > > address 192.168.0.1 > netmask 255.255.255.0 > # network 192.168.0.0 > broadcast 192.168.0.255 > gateway 192.168.0.2 > > # Internet speedy lixo telefonica > > auto eth1 > # allow-hotplug eth1 > iface eth1 inet dhcp > > > Arquivo: /etc/default/dhcp3-server > INTERFACES="eth0" > > > > > > > > > > > > Em 24/06/09, Rogerio de Paula<[email protected]> escreveu: >> Alan, >> Vamos continuar nossa linha de racicionio. Agora você já está com a Rede >> recenbo ip pelo DHCP, e o servidor já tem internet. >> Primeira coisa, após você ter reiniciado o Servidor para troca das placas >> de >> Rede, você: >> >> Setou corretamento o MAC da nova placa??? >> Você re-iniciou o DHCP??? " # /etc/init.d/dhcp3-server restart " ou Stop >> e >> depois Start. >> >> Eu apaguei os meus e-mails de ontem, não lembro como está a configuração >> do >> DHCP, passa novamente por favor, os arquivos: *DHCPD.CONF* = >> "/etc/dhcp3/dhcpd.conf", *DHCP3-SERVER* = "/etc/default/dhcp3-server. O >> arquivo INTERFACES, já tem nesse mesmo e-mail. Me mande os três para eu >> ver >> a configuração. >> >> Veja só Alan, devemos estar deixando um detalhe escapar... vamos achar >> esse >> detalhe e fazer esse servidor Funcionar... Parabéns pela paciência, não >> sei >> quanto é a sua experiência com LINUX, mas me parece que você é iniciante, >> e >> como dizia meu PAI, todo começo é complicado... >> >> Retorne o mais rápido possivel, pois vou viajar amanhã, e quero deixar >> seu >> DHCP funcionando antes de ir... >> >> Abraço >> >> Rogerio de Paula >> [email protected] >> >> >> >> 2009/6/24 alan inacio <[email protected]> >> >>> Problema da eth1 resolvido. Placa realtreco estava com frescurit.. >>> troquei >>> a por outra realtreco dai volto a funciona a internet no servidor. >>> >>> >>> >>> debian:~# ifconfig eth1 >>> >>> eth1 Link encap:Ethernet Endereço de HW 00:05:00:a0:05:d3 >>> >>> inet end.: 10.0.0.7 Bcast:10.0.0.255 Masc:255.255.255.0 >>> >>> endereço inet6: fe80::205:ff:fea0:5d3/64 Escopo:Link >>> >>> UP BROADCASTRUNNING MULTICAST MTU:1500 Métrica:1 >>> >>> RX packets:51 errors:0 dropped:0 overruns:0 frame:0 >>> >>> TX packets:89 errors:0 dropped:0 overruns:0 carrier:0 >>> >>> colisões:0 txqueuelen:1000 >>> >>> RX bytes:4191 (4.0 KiB) TX byt >>> >>> >>> >>> >>> >>> Configuração que o terminal esta recebendo do servidor >>> >>> >>> >>> Sufixo DNS específico à conexão: >>> >>> Descrição: Marvell Yukon 88E8056 PCI-E Gigabit Ethernet Controller >>> >>> Endereço Físico: 00-22-15-96-8A-19 >>> >>> DHCP Ativado: Sim >>> >>> IPv4 Endereço IP: 192.168.0.5 >>> >>> IPv4 Máscara de Sub-rede: 255.255.255.0 >>> >>> Concessão Obtida: quarta-feira, 24 de junho de 2009 12:47:48 >>> >>> Vencimento da Concessão: quarta-feira, 24 de junho de 2009 12:57:48 >>> >>> IPv4 Gateway Padrão: 192.168.0.2 >>> >>> IPv4 Servidor DHCP: 192.168.0.1 >>> >>> IPv4 Servidores DNS: 200.204.0.10, 200.204.0.138 >>> >>> IPv4 Servidor WINS: >>> >>> NetBIOS sobre Tcpip Habilitado: Sim >>> >>> Endereço IPv6 link-local: fe80::a4c2:ea61:713a:b97a%10 >>> >>> IPv6 Gateway Padrão: >>> >>> IPv6 Servidor DNS: >>> >>> >>> Os terminais ainda continuam sem internet >>> >>> >>> execute as seguintes regras para enviar os pacotes para rede. >>> >>> >>> >>> # modprobe iptable_nat >>> >>> echo > 1 /proc/sys/net/ipv4/ip_forward >>> >>> iptables -t nat -A POSTROUTING -o ppp0 -j MASQUERADE >>> >>> >>> >>> Antes de tudo instalei os pacotes pppoeconf para conexão ADSL e o >>> ifrename >>> para fixar os devices das interfaces certo. >>> >>> >>> 2009/6/24 alan inacio <[email protected]> >>> >>> Rogerio Boa noite! Efetuei todas as instalações e configurações com >>>> sucesso mas acho q alguma coisa esta errado com a ETH1 Pois não deveria >>>> esta >>>> com o IP do meu modem? Veja abaixo. >>>> A internet ainda não esta funcionando na rede nem no servidor. tentei >>>> pingar algun site no servidor porém sem respostas. >>>> >>>> >>>> >>>> Modem speedy da telefonica >>>> >>>> >>>> >>>> debian:~# ifconfig eth1 >>>> >>>> eth1 Link encap:Ethernet Endereço de HW 00:80:ad:00:2d:32 >>>> >>>> UP BROADCASTRUNNING MULTICAST MTU:1500 Métrica:1 >>>> >>>> RX packets:8 errors:0 dropped:0 overruns:0 frame:0 >>>> >>>> TX packets:44 errors:0 dropped:0 overruns:0 carrier:0 >>>> >>>> colisões:0 txqueuelen:1000 >>>> >>>> RX bytes:1349 (1.3 KiB) TX bytes:7239 (7.0 KiB) >>>> >>>> IRQ:5 Endereço de E/S:0xd800 >>>> >>>> >>>> >>>> >>>> >>>> Rede Local >>>> >>>> >>>> >>>> debian:~# ifconfig eth0 >>>> >>>> eth0 Link encap:Ethernet Endereço de HW 00:07:95:d5:9d:ba >>>> >>>> inet end.: 192.168.0.1 Bcast:192.168.0.255 >>>> Masc:255.255.255.0 >>>> >>>> endereço inet6: fe80::207:95ff:fed5:9dba/64 Escopo:Link >>>> >>>> UP BROADCASTRUNNING MULTICAST MTU:1500 Métrica:1 >>>> >>>> RX packets:2146 errors:0 dropped:0 overruns:0 frame:0 >>>> >>>> TX packets:462 errors:0 dropped:0 overruns:0 carrier:0 >>>> >>>> colisões:0 txqueuelen:1000 >>>> >>>> RX bytes:173720 (169.6 KiB) TX bytes:39078 (38.1 KiB) >>>> >>>> IRQ:5 Endereço de E/S:0xdc00 >>>> >>>> >>>> >>>> >>>> >>>> >>>> >>>> >>>> >>>> >>>> >>>> Configuração >>>> >>>> >>>> >>>> Arquivo: /etc/network/interfaces >>>> >>>> >>>> >>>> auto lo >>>> >>>> iface lo inet loopback >>>> >>>> >>>> >>>> # Rede Local >>>> >>>> >>>> >>>> auto eth0 >>>> >>>> iface eth0 inet static >>>> >>>> >>>> >>>> address 192.168.0.1 >>>> >>>> netmask 255.255.255.0 >>>> >>>> # network 192.168.0.0 >>>> >>>> # broadcast 192.168.0.255 >>>> >>>> gateway 192.168.0.2 >>>> >>>> >>>> >>>> # Internet speedy lixo telefonica >>>> >>>> >>>> >>>> auto eth1 >>>> >>>> # allow-hotplug eth1 >>>> >>>> iface eth1 inet dhcp >>>> >>>> >>>> >>>> # address 10.0.0.1 >>>> >>>> # netmask 255.0.0.0 >>>> >>>> # network 10.0.0.0 >>>> >>>> # broadcast 10.0.0.255 >>>> >>>> # gateway 10.0.0.138 >>>> >>>> >>>> 2009/6/23 alan inacio <[email protected]> >>>> >>>>> Ola Rogerio! me tira uma duvia o meu modem já esta rotiado mesmo assim >>>>> tenho q instalar o pacote pppoeconf ? >>>>> >>>>> >>>>> >>>>> >>>>> 2009/6/23 Rogerio de Paula <[email protected]> >>>>> >>>>>> Primeiro desculpe por ter escrito o nome do Pacote errado, >>>>>> é a idade rapaz, vem batendo... >>>>>> Retorne para sabermos se já conseguiu rotear a internet, pois a sua >>>>>> configuração está muito frágil, precisamos criar alguma segurança >>>>>> para >>>>>> você >>>>>> não engoradar a lista de invasões. >>>>>> >>>>>> E pegue alguma folga, pois se você está achando complicado o DHCP, se >>>>>> prepare, pois criar segurança vai ser de Fud... >>>>>> >>>>>> Abraço, >>>>>> >>>>>> Aguardamos retorno, >>>>>> >>>>>> >>>>>> Rogerio de Paula >>>>>> [email protected] >>>>>> >>>>>> >>>>>> >>>>>> "Desejo que todos nós encontremos a Paz e Felicidade no Amor de Deus >>>>>> pai, e de J. C. F. U. E S. N., a quem devemos dar graças hoje e >>>>>> sempre". >>>>>> >>>>>> * >>>>>> * >>>>>> >>>>>> >>>>>> >>>>>> 2009/6/23 Rogerio de Paula <[email protected]> >>>>>> >>>>>>> vc conseguiu propagar o sinal de internet? >>>>>>> >>>>>>> >>>>>>> 2009/6/23 alan inacio <[email protected]> >>>>>>> >>>>>>>> Ola Rogerio.. agostaria de te agradecer pela força.. >>>>>>>> >>>>>>>> executei o comando *# apt-get install pppeoconf* porém ele me >>>>>>>> informa >>>>>>>> o seguinte "E: Impossivel achar o pacote pppeoconf" >>>>>>>> >>>>>>>> >>>>>>>> >>>>>>>> 2009/6/23 Rogerio de Paula <[email protected]> >>>>>>>> >>>>>>>> Olha só. a sua configuração está correta, mas está incompleta. >>>>>>>>> Acompanhe comigo o raciocinio: >>>>>>>>> >>>>>>>>> no Arquivo dhcpd.conf, você está distribuindo o ip para sua rede >>>>>>>>> interna. a rede está funcionando, com isso o serviço de DHCP esta >>>>>>>>> correto. >>>>>>>>> >>>>>>>>> >>>>>>>>> DHCP - OK. >>>>>>>>> >>>>>>>>> No arquivo interface, você está dizendo que a Placa de Rede eth0, >>>>>>>>> deve ter um ip fixo, e a placa de rede eth1, deve ter o ip do >>>>>>>>> DHCP, >>>>>>>>> externo >>>>>>>>> provavelmente, me parece que do SPEEDY. >>>>>>>>> >>>>>>>>> e como o DHCP interno está funcionando está configuração está >>>>>>>>> correta. >>>>>>>>> >>>>>>>>> no arquivo dhcp3-server, você está dizendo que o Servidor deve >>>>>>>>> enchergar como rede interna a "eth0". >>>>>>>>> >>>>>>>>> Até aqui, perfeito. >>>>>>>>> >>>>>>>>> Agora como seu computador vai saber que a internet está entrando >>>>>>>>> pela >>>>>>>>> Eth1???? você não deveria criar um vinculo entre as duas >>>>>>>>> placas???? >>>>>>>>> >>>>>>>>> Anota ai o comando: >>>>>>>>> >>>>>>>>> *# modprobe iptable_nat >>>>>>>>> echo > 1 /proc/sys/net/ipv4/ip_forward >>>>>>>>> iptables -t nat -A POSTROUTING -o eth1 -j MASQUERADE* >>>>>>>>> >>>>>>>>> A primeira linha pode se tornar desnecessária dependendo da versão >>>>>>>>> do >>>>>>>>> seu Linux. >>>>>>>>> >>>>>>>>> Caso eu esteja correto, se o seu link for Sppedy, você vai >>>>>>>>> precisar >>>>>>>>> instalar o *pppeoconf, *calma que é bastante fácil: >>>>>>>>> *# apt-get install pppeoconf* >>>>>>>>> >>>>>>>>> e no comando acima, substitua o eth1, por "ppp0". >>>>>>>>> >>>>>>>>> >>>>>>>>> bom, vamos continuar... depois de todo esse trabalho, se alguém ou >>>>>>>>> alguma coisa re-inicar o seu servidor DHCP, você pode perder parte >>>>>>>>> da sua configuração... porposta: vamos estabilizar isso, >>>>>>>>> instalando >>>>>>>>> um programinha chamado: ifrename, também muito fácil: >>>>>>>>> >>>>>>>>> *# apt-get install ifrename* >>>>>>>>> >>>>>>>>> Após a instalação, precisamos criar um arquivo chamado iftab: >>>>>>>>> >>>>>>>>> *# pico /etc/iftab* >>>>>>>>> >>>>>>>>> #com o seguinte conteúdo: >>>>>>>>> >>>>>>>>> eth0 mac xx:xx:xx:xx >>>>>>>>> eth1 mac xx:xx:xx:xx >>>>>>>>> >>>>>>>>> #o lugar dos xx:xx coloque o mac address das suas placas... >>>>>>>>> >>>>>>>>> Após isso re-inicio o serviço de dhcp /etc/init.d/dhcp3-server >>>>>>>>> restart >>>>>>>>> >>>>>>>>> >>>>>>>>> Retorne o e-mail dando certo ou não... fico no aguardo. >>>>>>>>> >>>>>>>>> Rogerio de Paula >>>>>>>>> >>>>>>>>> >>>>>>>>> >>>>>>>>> >>>>>>>>> >>>>>>>>> >>>>>>>>> 2009/6/23 alan inacio <[email protected]> >>>>>>>>> >>>>>>>>>> Nova configuração efetua.. porém a internet ainda não esta >>>>>>>>>> funcionando... no servidor a internet funciona normalmente. >>>>>>>>>> >>>>>>>>>> >>>>>>>>>> >>>>>>>>>> ------------------------------------------------------------------------------------- >>>>>>>>>> # /etc/dhcp3/dhcpd.conf >>>>>>>>>> ddns-update-style none; >>>>>>>>>> default-lease-time 600; >>>>>>>>>> max-lease-time 7200; >>>>>>>>>> authoritative; >>>>>>>>>> subnet 192.168.0.0 netmask 255.255.255.0 { >>>>>>>>>> range 192.168.0.100 192.168.0.199; >>>>>>>>>> option routers 192.168.0.1; >>>>>>>>>> option domain-name-servers 200.204.0.10,200.204.0.138; <==== DND >>>>>>>>>> da >>>>>>>>>> telefonica >>>>>>>>>> option broadcast-address 192.168.0.255; >>>>>>>>>> } >>>>>>>>>> >>>>>>>>>> >>>>>>>>>> ------------------------------------------------------------------------------------- >>>>>>>>>> #/etc/default/dhcp3-server >>>>>>>>>> # Defaults for dhcp initscript >>>>>>>>>> # sourced by /etc/init.d/dhcp >>>>>>>>>> # installed at /etc/default/dhcp3-server by the maintainer >>>>>>>>>> scripts >>>>>>>>>> # >>>>>>>>>> # This is a POSIX shell fragment >>>>>>>>>> # >>>>>>>>>> # On what interfaces should the DHCP server (dhcpd) serve DHCP >>>>>>>>>> requests? >>>>>>>>>> # Separate multiple interfaces with spaces, e.g. "eth0 eth1". >>>>>>>>>> INTERFACES="eth0" >>>>>>>>>> >>>>>>>>>> >>>>>>>>>> ------------------------------------------------------------------------------------- >>>>>>>>>> >>>>>>>>>> #/etc/network/interfaces >>>>>>>>>> auto lo >>>>>>>>>> iface lo inet loopback >>>>>>>>>> # Rede Loca >>>>>>>>>> auto eth0 >>>>>>>>>> iface eth0 inet static >>>>>>>>>> address 192.168.0.1 >>>>>>>>>> netmask 255.255.255.0 >>>>>>>>>> gateway 192.168.0.1 >>>>>>>>>> >>>>>>>>>> # internet Mondem Speedy lixo telefonica >>>>>>>>>> auto eth1 >>>>>>>>>> iface eth1 inet dhcp >>>>>>>>>> # address 10.0.0.1 >>>>>>>>>> # netmask 255.255.0.0 >>>>>>>>>> # gateway 10.0.0.138 >>>>>>>>>> >>>>>>>>>> >>>>>>>>>> ------------------------------------------------------------------------------------ >>>>>>>>>> >>>>>>>>>> Ip q o micro esta recebendo do servidor DHCP >>>>>>>>>> Sufixo DNS específico à conexão: >>>>>>>>>> Descrição: Marvell Yukon 88E8056 PCI-E Gigabit Ethernet >>>>>>>>>> Controller >>>>>>>>>> Endereço Físico: 00-22-15-96-8A-19 >>>>>>>>>> DHCP Ativado: Sim >>>>>>>>>> IPv4 Endereço IP: 192.168.0.100 >>>>>>>>>> IPv4 Máscara de Sub-rede: 255.255.255.0 >>>>>>>>>> Concessão Obtida: terça-feira, 23 de junho de 2009 10:53:47 >>>>>>>>>> Vencimento da Concessão: terça-feira, 23 de junho de 2009 >>>>>>>>>> 11:03:47 >>>>>>>>>> IPv4 Gateway Padrão: 192.168.0.1 >>>>>>>>>> IPv4 Servidor DHCP: 192.168.0.1 >>>>>>>>>> IPv4 Servidores DNS: 200.204.0.10, 200.204.0.138 >>>>>>>>>> IPv4 Servidor WINS: >>>>>>>>>> NetBIOS sobre Tcpip Habilitado: Sim >>>>>>>>>> Endereço IPv6 link-local: fe80::a4c2:ea61:713a:b97a%10 >>>>>>>>>> IPv6 Gateway Padrão: >>>>>>>>>> IPv6 Servidor DNS: >>>>>>>>>> >>>>>>>>>> >>>>>>>>>> >>>>>>>>>> >>>>>>>>>> >>>>>>>>>> >>>>>>>>>> >>>>>>>>>> 2009/6/23 alan inacio <[email protected]> >>>>>>>>>> >>>>>>>>>> Srs. >>>>>>>>>>> Agora as maquinas estão recebendo os ip’s normalmente, porém a >>>>>>>>>>> internet ainda não esta funcionando. Agora configurei desta >>>>>>>>>>> forma. >>>>>>>>>>> >>>>>>>>>>> # /etc/dhcp3/dhcpd.conf >>>>>>>>>>> ddns-update-style none; >>>>>>>>>>> default-lease-time 600; >>>>>>>>>>> max-lease-time 7200; >>>>>>>>>>> authoritative; >>>>>>>>>>> subnet 192.168.0.0 netmask 255.255.255.0 { >>>>>>>>>>> range 192.168.0.100 192.0.0.199; >>>>>>>>>>> option routers 10.0.0.138; >>>>>>>>>>> option domain-name-servers 200.204.0.10,200.204.0.138; >>>>>>>>>>> option broadcast-address 192.168.0.255; >>>>>>>>>>> } >>>>>>>>>>> >>>>>>>>>>> >>>>>>>>>>> #/etc/default/dhcp3-server >>>>>>>>>>> >>>>>>>>>>> INTERFACES="eth0" >>>>>>>>>>> >>>>>>>>>>> >>>>>>>>>>> #/etc/network/interfaces >>>>>>>>>>> >>>>>>>>>>> auto lo >>>>>>>>>>> iface lo inet loopback >>>>>>>>>>> >>>>>>>>>>> # Rede Loca >>>>>>>>>>> auto eth0 >>>>>>>>>>> iface eth0 inet dhcp >>>>>>>>>>> address 192.168.0.1 >>>>>>>>>>> netmask 255.255.255.0 >>>>>>>>>>> gateway 192.168.0.2 >>>>>>>>>>> >>>>>>>>>>> >>>>>>>>>>> >>>>>>>>>>> # internet Mondem Speedy lixo telefonica >>>>>>>>>>> >>>>>>>>>>> auto eth2 >>>>>>>>>>> iface eth2 inet dhcp >>>>>>>>>>> >>>>>>>>>>> address 10.0.0.1 >>>>>>>>>>> netmask 255.255.0.0 >>>>>>>>>>> gateway 10.0.0.138 >>>>>>>>>>> >>>>>>>>>>> 2009/6/22 alan inacio <[email protected]> >>>>>>>>>>> >>>>>>>>>>> Toda vez que tendo iniciar o serviço dhcp recebo a seguinte >>>>>>>>>>>> mensagem “ dhcpd3check syslog for diagnostics. Failed!” >>>>>>>>>>>> >>>>>>>>>>>> Verifiquei o syslog >>>>>>>>>>>> Com a seguinte mensagem abaixo >>>>>>>>>>>> >>>>>>>>>>>> Wrote 0 lease to lease file >>>>>>>>>>>> No subnet declaration for eth0 (0.0.0.0). >>>>>>>>>>>> ** Ignoring request on eth0. If this is not what you want, >>>>>>>>>>>> please >>>>>>>>>>>> write a subnet declaration in your dhcpd.con fle for the >>>>>>>>>>>> network >>>>>>>>>>>> segment to >>>>>>>>>>>> which interface eth0 is attached. ** >>>>>>>>>>>> >>>>>>>>>>>> Not configured to liten on any interfaces! >>>>>>>>>>>> >>>>>>>>>>>> Segue a minha configuração abaixo; >>>>>>>>>>>> Configuração do meu modem DHCP ativo 10.0.0.138 cabo do modem >>>>>>>>>>>> esta >>>>>>>>>>>> conectado na eth0 e a eth2 na rede >>>>>>>>>>>> >>>>>>>>>>>> # /etc/dhcp3/dhcpd.conf >>>>>>>>>>>> ddns-update-style none; >>>>>>>>>>>> default-lease-time 600; >>>>>>>>>>>> max-lease-time 7200; >>>>>>>>>>>> authoritative; >>>>>>>>>>>> subnet 10.0.0.0 netmask 255.255.0.0 { >>>>>>>>>>>> range 10.0.0.100 10.0.0.199; >>>>>>>>>>>> option routers 10.0.0.138; >>>>>>>>>>>> option domain-name-servers 200.204.0.10,200.204.0.138; >>>>>>>>>>>> option broadcast-address 10.0.0.255; >>>>>>>>>>>> } >>>>>>>>>>>> >>>>>>>>>>>> #/etc/default/dhcp3-server >>>>>>>>>>>> >>>>>>>>>>>> INTERFACES="eth0" >>>>>>>>>>>> >>>>>>>>>>>> #/etc/network/interfaces >>>>>>>>>>>> >>>>>>>>>>>> auto lo >>>>>>>>>>>> iface lo inet loopback >>>>>>>>>>>> >>>>>>>>>>>> # Rede Loca >>>>>>>>>>>> auto eth0 >>>>>>>>>>>> iface eth0 inet dhcp >>>>>>>>>>>> address 10.0.0.1 >>>>>>>>>>>> netmask 255.255.0.0 >>>>>>>>>>>> gateway 10.0.0.138 >>>>>>>>>>>> >>>>>>>>>>>> # internet >>>>>>>>>>>> >>>>>>>>>>>> auto eth2 >>>>>>>>>>>> iface eth2 inet static >>>>>>>>>>>> address 10.0.0.3 >>>>>>>>>>>> netmask 255.255.0.0 >>>>>>>>>>>> gateway 10.0.0.138 >>>>>>>>>>>> >>>>>>>>>>> >>>>>>>>>>> >>>>>>>>>> >>>>>>>>> >>>>>>>>> >>>>>>>>> -- >>>>>>>>> Rogerio de Paula >>>>>>>>> [email protected] >>>>>>>>> A.R.L.S. ESTRELA DO JAGUARÉ - 235 - GOP - COMAB >>>>>>>>> >>>>>>>>> >>>>>>>>> "Desejo que todos nós encontremos a Paz e Felicidade no Amor de >>>>>>>>> Deus >>>>>>>>> pai, e de J. C. F. U. E S. N., a quem devemos dar graças hoje e >>>>>>>>> sempre". >>>>>>>>> >>>>>>>>> >>>>>>>> >>>>>>> >>>>>>> >>>>>>> -- >>>>>>> Rogerio de Paula >>>>>>> [email protected] >>>>>>> A.R.L.S. ESTRELA DO JAGUARÉ - 235 - GOP - COMAB >>>>>>> >>>>>>> >>>>>>> "Desejo que todos nós encontremos a Paz e Felicidade no Amor de Deus >>>>>>> pai, e de J. C. F. U. E S. N., a quem devemos dar graças hoje e >>>>>>> sempre". >>>>>>> >>>>>>> >>>>>> >>>>>> >>>>>> - >>>>>> >>>>> >>>>> >>>> >>> >> >> >> -- >> Rogerio de Paula >> [email protected] >> A.R.L.S. ESTRELA DO JAGUARÉ - 235 - GOP - COMAB >> >> >> "Desejo que todos nós encontremos a Paz e Felicidade no Amor de Deus pai, >> e >> de J. C. F. U. E S. N., a quem devemos dar graças hoje e sempre". >> > -- To UNSUBSCRIBE, email to [email protected] with a subject of "unsubscribe". Trouble? Contact [email protected]
