boa tarde pessoal!!
segue abaixo o que eu fiz:
=============================================
house:/media/BOSS/driver-braview/Realtek/rtl8139d/linux# *modprobe 8139too*
house:/media/BOSS/driver-braview/Realtek/rtl8139d/linux# *lsmod|grep -i 8139
*
8139too 20384 0
mii 4896 1 8139too
house:/media/BOSS/driver-braview/Realtek/rtl8139d/linux# *mii-tool*
no MII interfaces found
house:/media/BOSS/driver-braview/Realtek/rtl8139d/linux# *ifconfig -a*
lo Link encap:Loopback Local
inet end.: 127.0.0.1 Masc:255.0.0.0
endereço inet6: ::1/128 Escopo:Máquina
UP LOOPBACKRUNNING MTU:16436 Métrica:1
RX packets:8 errors:0 dropped:0 overruns:0 frame:0
TX packets:8 errors:0 dropped:0 overruns:0 carrier:0
colisões:0 txqueuelen:0
RX bytes:560 (560.0 B) TX bytes:560 (560.0 B)
house:/media/BOSS/driver-braview/Realtek/rtl8139d/linux# *ifup eth0*
Internet Systems Consortium DHCP Client V3.1.1
Copyright 2004-2008 Internet Systems Consortium.
All rights reserved.
For info, please visit http://www.isc.org/sw/dhcp/
SIOCSIFADDR: No such device
eth0: ERROR while getting interface flags: No such device
eth0: ERROR while getting interface flags: No such device
Bind socket to interface: No such device
Failed to bring up eth0.
===========================================
house:/media/BOSS/driver-braview/Realtek/rtl8139d/linux# *modprobe -r
8139too*
house:/media/BOSS/driver-braview/Realtek/rtl8139d/linux# *lsmod|grep -i 8139
*
house:/media/BOSS/driver-braview/Realtek/rtl8139d/linux# *modprobe 8139cp*
house:/media/BOSS/driver-braview/Realtek/rtl8139d/linux# *lsmod|grep -i 8139
*
8139cp 16800 0
mii 4896 1 8139cp
house:/media/BOSS/driver-braview/Realtek/rtl8139d/linux# *mii-tool*
no MII interfaces found
house:/media/BOSS/driver-braview/Realtek/rtl8139d/linux# *ifup eth0*
Internet Systems Consortium DHCP Client V3.1.1
Copyright 2004-2008 Internet Systems Consortium.
All rights reserved.
For info, please visit http://www.isc.org/sw/dhcp/
SIOCSIFADDR: No such device
eth0: ERROR while getting interface flags: No such device
eth0: ERROR while getting interface flags: No such device
Bind socket to interface: No such device
Failed to bring up eth0.
===========================================
tentei também fazer a instalação do ndiswrapper, mas não foi.
baixei o módulo desta placa pro linux (dentro do módulo do windows) mas ele
reclama de não ter achado o config.h, o que me faz pensar que foi tirado
quando teve aquela mudança dos headers do kernel.
detalhe: antes de fazer tudo isso eu limpei o arquivo
/etc/udev/rules.d/70-persistent-net.rules, e dei um reboot - o arquivo foi
preenchido com as informações da placa.
alguém tem mais alguma idéia? agradeço a todos que responderam até agora!!
abraços!
