Caros, Uso o mii-tool para testar se minhas placas de rede estao linkadas e qual ethX e o que, para o meu espanto o mii-tool esta respondendo de forma q eu nuca vi, veja a saida do comando:
mii-tool -w SIOCGMIIREG on eth0 failed: Input/output error SIOCGMIIREG on eth0 failed: Input/output error 12:17:20 eth0: negotiated 1000baseT-FD flow-control, link ok SIOCGMIIREG on eth1 failed: Input/output error SIOCGMIIREG on eth1 failed: Input/output error 12:17:20 eth1: negotiated 1000baseT-FD flow-control, link ok SIOCGMIIREG on eth2 failed: Input/output error SIOCGMIIREG on eth2 failed: Input/output error 12:17:20 eth2: negotiated 1000baseT-FD flow-control, link ok SIOCGMIIREG on eth3 failed: Input/output error SIOCGMIIREG on eth3 failed: Input/output error 12:17:20 eth3: negotiated 1000baseT-FD flow-control, link ok O interessante q apesar da 4 interfaces estare acusando link ok so há apenas 1 interface com cabo coenctado, fora esse erro de input/output que pesquizei no google e nao encontrei nada que me auxiliasse a ressolver. Estou usando o debian lenny AMD64 com 4 placas dual intel: /# lspci | grep Ether 06:00.0 Ethernet controller: Intel Corporation 82571EB Gigabit Ethernet Controller (rev 06) 06:00.1 Ethernet controller: Intel Corporation 82571EB Gigabit Ethernet Controller (rev 06) 07:00.0 Ethernet controller: Intel Corporation 82571EB Gigabit Ethernet Controller (rev 06) 07:00.1 Ethernet controller: Intel Corporation 82571EB Gigabit Ethernet Controller (rev 06) Alguem ja viu esse problema? ou pode me sujerir uma outra ferramenta que consiga identificar as interfaces e vericar se estao com linkadas ou nao. Att. -- Leandro Moreira Network Administrator LPIC1 - Linux Professional Institute Certified e-mail/msn: [email protected] Tel.: + 55(32) 9906-5713
