Bom dia Amigos,
Estou tentando instalar um PCI CARD Sky Media com duas portas Seriais e um
porta paralela
Tem um Cd cotendo os drivers para linux!
Quem quiser conferir eles estão no link:
http://purwodadi.ptpn-xi.com/download/Drivers/PCI%20IO/WCH%20card/CH35XDRV/WCH_2S1P/
Seguindo as instruções que estão no arquivo README q são estas aqui:
*"
91 D. Installation
92
93 D.1 Driver install
94 Please create a directory under root directory, e.g
/temp, do commands:
95
96 # cd /
97 # mkdir temp
98
99 After get driver file "wch_Vx.x.x.x.tar.gz". Copy file
to /temp
100 directory, then extract and install, do commands:
101
102 # cp wch_Vx.x.x.x.tar.gz /temp
103 # cd /temp
104 # tar xvfz wch_Vx.x.x.x.tar.gz
105 # cd /temp/wch
106 # make clean ; make install
107
108
*************************************************************
109 * If system is Suse 9.0 and errors occur
when *
110 * "make clean ; make install", do
commands: *
111
* *
112 * # cd
/usr/src/linux/ *
113 * # make
cloneconfig *
114 * # make
dep *
115
* *
116 * then do "make clean ; make install" again in
/temp/wch *
117
*************************************************************
118
119 Load driver module, do command:
120
121 # modprobe wch
122 or
123 # insmod /temp/wch/driver/wch.ko (wch.o for kernel 2.4)
124
125
126 Check driver module, do command:
127 # lsmod | grep wch
128
129
130 Unload driver, do command:
131 # rmmod wch
"*
porém qdo dou o comando make clean retorna isso:
*root@debian:/tmp/WCH_2S1P/LINUX# make clean
cd driver;\
make clean
make[1]: Entering directory `/tmp/WCH_2S1P/LINUX/driver'
rm -f *~
rm -f *.o
rm -rf ./.tmp_versions
rm -f *.mod*
rm -f *.ko
rm -f .wch*
rm -f wch
rm -f Module*
rm -f module*
rm -f /lib/modules/2.6.32-5-686/kernel/drivers/char/wch.ko
rm -f /lib/modules/2.6.32-5-686/misc/wch.ko
make[1]: Leaving directory `/tmp/WCH_2S1P/LINUX/driver'
cd wchdump;\
make clean;
make[1]: Entering directory `/tmp/WCH_2S1P/LINUX/wchdump'
rm -f wchdump
rm -f *~ *.o
make[1]: Leaving directory `/tmp/WCH_2S1P/LINUX/wchdump'
cd wchterm;\
make clean;
make[1]: Entering directory `/tmp/WCH_2S1P/LINUX/wchterm'
rm -f wchterm
rm -f *~ *.o
make[1]: Leaving directory `/tmp/WCH_2S1P/LINUX/wchterm'
cd wchmknod;\
rm -f *~
rm -f *~
*
e quando executo o comando make install retorna isso:
root@debian:/tmp/WCH_2S1P/LINUX# make install
cd driver;\
make install
make[1]: Entering directory `/tmp/WCH_2S1P/LINUX/driver'
make -C /lib/modules/2.6.32-5-686/build SUBDIRS=/tmp/WCH_2S1P/LINUX/driver
modules
make: Entering an unknown directory
make: *** /lib/modules/2.6.32-5-686/build: No such file or directory. Stop.
make: Leaving an unknown directory
make[1]: *** [modules] Error 2
make[1]: Leaving directory `/tmp/WCH_2S1P/LINUX/driver'
make: *** [driver_install] Error 2
Alguem saberia me dizer o que está errado?
Grato,
~ *| Fábio de
Sousa
*
.ºvº. *| *
/(_)\ | *Seja livre, use LINUX*
.^.^. | *Socialmente justo, economicamente viável e tecnologicamente
sustentável*
