o módulo i915 está carregado: $ lsmod | grep 915 i915 223022 2 drm_kms_helper 18569 1 i915 drm 112053 3 i915,drm_kms_helper i2c_algo_bit 3493 1 i915 video 14605 1 i915 i2c_core 12787 5 i915,drm_kms_helper,drm,i2c_algo_bit,videodev button 3598 1 i915
mas como faço para ter certeza que o módulo da minha placa é o i915? Em 11/09/12, Fred Maranhão<[email protected]> escreveu: > Caros, > > tenho um laptop hp ProBook 4320s com Debian stable > > ele tem uma saída VGA e uma saída HDMI. > > Tenho um monitor Goldstar ligado na VGA e um AOC ligado na HDMI, > através de um cabo HDMI - DVI-D. > > eu consigo todas as combinações de 2 monitores possíveis: > > monitor do laptop + Goldstar > mointor do laptop + AOC > Goldstar + AOC > > tudo configurando pelo gnome-display-properties. Rápido e simples. E > com tela extendida (não é clonada). > > Mas quando eu tento ligar as três telas juntas, no > gnome-display-properties, aparece a mensagem: > > "A configuração escolhida para o(s) vídeo(s) não pôde ser aplicada > não foi possível encontrar configuração de tela adequadas" > > acompanhei o /var/log/Xorg.0.log > > quando eu abro o gnome-display-properties (com o monitor do laptop e o > goldstar ativos), escreve isto no arquivo: > =========================================== > (II) intel(0): EDID vendor "GSM", prod id 19345 > (II) intel(0): Using hsync ranges from config file > (II) intel(0): Using vrefresh ranges from config file > (II) intel(0): Printing DDC gathered Modelines: > (II) intel(0): Modeline "1360x768"x0.0 85.50 1360 1424 1536 1792 > 768 771 777 795 +hsync +vsync (47.7 kHz) > (II) intel(0): Modeline "1280x768"x0.0 79.50 1280 1344 1472 1664 > 768 771 778 798 -hsync +vsync (47.8 kHz) > (II) intel(0): Modeline "800x600"x0.0 40.00 800 840 968 1056 600 > 601 605 628 +hsync +vsync (37.9 kHz) > (II) intel(0): Modeline "640x480"x0.0 31.50 640 656 720 840 480 > 481 484 500 -hsync -vsync (37.5 kHz) > (II) intel(0): Modeline "640x480"x0.0 25.18 640 656 752 800 480 > 490 492 525 -hsync -vsync (31.5 kHz) > (II) intel(0): Modeline "720x400"x0.0 28.32 720 738 846 900 400 > 412 414 449 -hsync +vsync (31.5 kHz) > (II) intel(0): Modeline "1024x768"x0.0 78.75 1024 1040 1136 1312 > 768 769 772 800 +hsync +vsync (60.0 kHz) > (II) intel(0): Modeline "1024x768"x0.0 65.00 1024 1048 1184 1344 > 768 771 777 806 -hsync -vsync (48.4 kHz) > (II) intel(0): Modeline "832x624"x0.0 57.28 832 864 928 1152 624 > 625 628 667 -hsync -vsync (49.7 kHz) > (II) intel(0): Modeline "800x600"x0.0 49.50 800 816 896 1056 600 > 601 604 625 +hsync +vsync (46.9 kHz) > =========================================== > > > quando eu desativo o goldstar, deixando apenas o monitor do laptop, > aparece isto: > > =========================================== > (II) intel(0): EDID vendor "GSM", prod id 19345 > (II) intel(0): Using hsync ranges from config file > (II) intel(0): Using vrefresh ranges from config file > (II) intel(0): Printing DDC gathered Modelines: > (II) intel(0): Modeline "1360x768"x0.0 85.50 1360 1424 1536 1792 > 768 771 777 795 +hsync +vsync (47.7 kHz) > (II) intel(0): Modeline "1280x768"x0.0 79.50 1280 1344 1472 1664 > 768 771 778 798 -hsync +vsync (47.8 kHz) > (II) intel(0): Modeline "800x600"x0.0 40.00 800 840 968 1056 600 > 601 605 628 +hsync +vsync (37.9 kHz) > (II) intel(0): Modeline "640x480"x0.0 31.50 640 656 720 840 480 > 481 484 500 -hsync -vsync (37.5 kHz) > (II) intel(0): Modeline "640x480"x0.0 25.18 640 656 752 800 480 > 490 492 525 -hsync -vsync (31.5 kHz) > (II) intel(0): Modeline "720x400"x0.0 28.32 720 738 846 900 400 > 412 414 449 -hsync +vsync (31.5 kHz) > (II) intel(0): Modeline "1024x768"x0.0 78.75 1024 1040 1136 1312 > 768 769 772 800 +hsync +vsync (60.0 kHz) > (II) intel(0): Modeline "1024x768"x0.0 65.00 1024 1048 1184 1344 > 768 771 777 806 -hsync -vsync (48.4 kHz) > (II) intel(0): Modeline "832x624"x0.0 57.28 832 864 928 1152 624 > 625 628 667 -hsync -vsync (49.7 kHz) > (II) intel(0): Modeline "800x600"x0.0 49.50 800 816 896 1056 600 > 601 604 625 +hsync +vsync (46.9 kHz) > (II) intel(0): EDID vendor "GSM", prod id 19345 > (II) intel(0): Using hsync ranges from config file > (II) intel(0): Using vrefresh ranges from config file > (II) intel(0): Printing DDC gathered Modelines: > (II) intel(0): Modeline "1360x768"x0.0 85.50 1360 1424 1536 1792 > 768 771 777 795 +hsync +vsync (47.7 kHz) > (II) intel(0): Modeline "1280x768"x0.0 79.50 1280 1344 1472 1664 > 768 771 778 798 -hsync +vsync (47.8 kHz) > (II) intel(0): Modeline "800x600"x0.0 40.00 800 840 968 1056 600 > 601 605 628 +hsync +vsync (37.9 kHz) > (II) intel(0): Modeline "640x480"x0.0 31.50 640 656 720 840 480 > 481 484 500 -hsync -vsync (37.5 kHz) > (II) intel(0): Modeline "640x480"x0.0 25.18 640 656 752 800 480 > 490 492 525 -hsync -vsync (31.5 kHz) > (II) intel(0): Modeline "720x400"x0.0 28.32 720 738 846 900 400 > 412 414 449 -hsync +vsync (31.5 kHz) > (II) intel(0): Modeline "1024x768"x0.0 78.75 1024 1040 1136 1312 > 768 769 772 800 +hsync +vsync (60.0 kHz) > (II) intel(0): Modeline "1024x768"x0.0 65.00 1024 1048 1184 1344 > 768 771 777 806 -hsync -vsync (48.4 kHz) > (II) intel(0): Modeline "832x624"x0.0 57.28 832 864 928 1152 624 > 625 628 667 -hsync -vsync (49.7 kHz) > (II) intel(0): Modeline "800x600"x0.0 49.50 800 816 896 1056 600 > 601 604 625 +hsync +vsync (46.9 kHz) > (II) intel(0): Allocated new frame buffer 1408x768 stride 5632, tiled > =========================================== > > quando eu reativo o goldstar, aparece isto: > > =========================================== > (II) intel(0): EDID vendor "GSM", prod id 19345 > (II) intel(0): Using hsync ranges from config file > (II) intel(0): Using vrefresh ranges from config file > (II) intel(0): Printing DDC gathered Modelines: > (II) intel(0): Modeline "1360x768"x0.0 85.50 1360 1424 1536 1792 > 768 771 777 795 +hsync +vsync (47.7 kHz) > (II) intel(0): Modeline "1280x768"x0.0 79.50 1280 1344 1472 1664 > 768 771 778 798 -hsync +vsync (47.8 kHz) > (II) intel(0): Modeline "800x600"x0.0 40.00 800 840 968 1056 600 > 601 605 628 +hsync +vsync (37.9 kHz) > (II) intel(0): Modeline "640x480"x0.0 31.50 640 656 720 840 480 > 481 484 500 -hsync -vsync (37.5 kHz) > (II) intel(0): Modeline "640x480"x0.0 25.18 640 656 752 800 480 > 490 492 525 -hsync -vsync (31.5 kHz) > (II) intel(0): Modeline "720x400"x0.0 28.32 720 738 846 900 400 > 412 414 449 -hsync +vsync (31.5 kHz) > (II) intel(0): Modeline "1024x768"x0.0 78.75 1024 1040 1136 1312 > 768 769 772 800 +hsync +vsync (60.0 kHz) > (II) intel(0): Modeline "1024x768"x0.0 65.00 1024 1048 1184 1344 > 768 771 777 806 -hsync -vsync (48.4 kHz) > (II) intel(0): Modeline "832x624"x0.0 57.28 832 864 928 1152 624 > 625 628 667 -hsync -vsync (49.7 kHz) > (II) intel(0): Modeline "800x600"x0.0 49.50 800 816 896 1056 600 > 601 604 625 +hsync +vsync (46.9 kHz) > (II) intel(0): EDID vendor "LGD", prod id 474 > (II) intel(0): Printing DDC gathered Modelines: > (II) intel(0): Modeline "1366x768"x0.0 69.30 1366 1398 1446 1462 > 768 771 777 790 -hsync -vsync (47.4 kHz) > (II) intel(0): Allocated new frame buffer 2752x768 stride 11264, tiled > =========================================== > > ao tentar ativar o terceiro (o AOC), aparece isto: > > =========================================== > (II) intel(0): EDID vendor "LGD", prod id 474 > (II) intel(0): Printing DDC gathered Modelines: > (II) intel(0): Modeline "1366x768"x0.0 69.30 1366 1398 1446 1462 > 768 771 777 790 -hsync -vsync (47.4 kHz) > (II) intel(0): EDID vendor "GSM", prod id 19345 > (II) intel(0): Using hsync ranges from config file > (II) intel(0): Using vrefresh ranges from config file > (II) intel(0): Printing DDC gathered Modelines: > (II) intel(0): Modeline "1360x768"x0.0 85.50 1360 1424 1536 1792 > 768 771 777 795 +hsync +vsync (47.7 kHz) > (II) intel(0): Modeline "1280x768"x0.0 79.50 1280 1344 1472 1664 > 768 771 778 798 -hsync +vsync (47.8 kHz) > (II) intel(0): Modeline "800x600"x0.0 40.00 800 840 968 1056 600 > 601 605 628 +hsync +vsync (37.9 kHz) > (II) intel(0): Modeline "640x480"x0.0 31.50 640 656 720 840 480 > 481 484 500 -hsync -vsync (37.5 kHz) > (II) intel(0): Modeline "640x480"x0.0 25.18 640 656 752 800 480 > 490 492 525 -hsync -vsync (31.5 kHz) > (II) intel(0): Modeline "720x400"x0.0 28.32 720 738 846 900 400 > 412 414 449 -hsync +vsync (31.5 kHz) > (II) intel(0): Modeline "1024x768"x0.0 78.75 1024 1040 1136 1312 > 768 769 772 800 +hsync +vsync (60.0 kHz) > (II) intel(0): Modeline "1024x768"x0.0 65.00 1024 1048 1184 1344 > 768 771 777 806 -hsync -vsync (48.4 kHz) > (II) intel(0): Modeline "832x624"x0.0 57.28 832 864 928 1152 624 > 625 628 667 -hsync -vsync (49.7 kHz) > (II) intel(0): Modeline "800x600"x0.0 49.50 800 816 896 1056 600 > 601 604 625 +hsync +vsync (46.9 kHz) > =========================================== > > aparece também a mensagem de erro "A configuração escolhida..." que já > citei acima. e nada no terceiro monitor. embora no > gnome-display-settings fique mostrado os 3 monitores como ativos. > > Também tentei configurar pelo grandr, mas deu na mesma. tentei sair do > gnome e ir para o xfce, mas o gerenciador de monitores do xfce4 só > enxerga um monitor. > > tentei no blackbox com o grandr e tambem nada. > > a saída do lspci: > =========================================== > $ lspci > 00:00.0 Host bridge: Intel Corporation Core Processor DRAM Controller (rev > 02) > 00:02.0 VGA compatible controller: Intel Corporation Core Processor > Integrated Graphics Controller (rev 02) > 00:16.0 Communication controller: Intel Corporation 5 Series/3400 > Series Chipset HECI Controller (rev 06) > 00:1a.0 USB Controller: Intel Corporation 5 Series/3400 Series Chipset > USB2 Enhanced Host Controller (rev 05) > 00:1b.0 Audio device: Intel Corporation 5 Series/3400 Series Chipset > High Definition Audio (rev 05) > 00:1c.0 PCI bridge: Intel Corporation 5 Series/3400 Series Chipset PCI > Express Root Port 1 (rev 05) > 00:1c.1 PCI bridge: Intel Corporation 5 Series/3400 Series Chipset PCI > Express Root Port 2 (rev 05) > 00:1c.3 PCI bridge: Intel Corporation 5 Series/3400 Series Chipset PCI > Express Root Port 4 (rev 05) > 00:1c.5 PCI bridge: Intel Corporation 5 Series/3400 Series Chipset PCI > Express Root Port 6 (rev 05) > 00:1d.0 USB Controller: Intel Corporation 5 Series/3400 Series Chipset > USB2 Enhanced Host Controller (rev 05) > 00:1e.0 PCI bridge: Intel Corporation 82801 Mobile PCI Bridge (rev a5) > 00:1f.0 ISA bridge: Intel Corporation Mobile 5 Series Chipset LPC > Interface Controller (rev 05) > 00:1f.2 SATA controller: Intel Corporation 5 Series/3400 Series > Chipset 6 port SATA AHCI Controller (rev 05) > 00:1f.6 Signal processing controller: Intel Corporation 5 Series/3400 > Series Chipset Thermal Subsystem (rev 05) > 43:00.0 Network controller: Atheros Communications Inc. AR9285 > Wireless Network Adapter (PCI-Express) (rev 01) > 44:00.0 Ethernet controller: Realtek Semiconductor Co., Ltd. > RTL8111/8168B PCI Express Gigabit Ethernet controller (rev 03) > ff:00.0 Host bridge: Intel Corporation Core Processor QuickPath > Architecture Generic Non-core Registers (rev 02) > ff:00.1 Host bridge: Intel Corporation Core Processor QuickPath > Architecture System Address Decoder (rev 02) > ff:02.0 Host bridge: Intel Corporation Core Processor QPI Link 0 (rev 02) > ff:02.1 Host bridge: Intel Corporation Core Processor QPI Physical 0 (rev > 02) > ff:02.2 Host bridge: Intel Corporation Core Processor Reserved (rev 02) > ff:02.3 Host bridge: Intel Corporation Core Processor Reserved (rev 02) > =========================================== > > Alguém tem alguma sugestão? Não gostaria de migrar para o testing para > testar, mas pode ser uma opção. ou testing ou backports. > > Fred > -- To UNSUBSCRIBE, email to [email protected] with a subject of "unsubscribe". Trouble? Contact [email protected] Archive: http://lists.debian.org/CAPr829menVWvMuz-W8D3�[email protected]
