Sim, o cabo é igual mas a porta SATA não ! Qual o chipset da sua motherboard ?
Está configurado na bios como AHCI ? Está com a versão mais recente da bios da sua motherboard ? Fábio Rabelo 2012/12/7 Gerson Haus <[email protected]> > Pessoal, > > Sabem se é necessário usar cabo SATA 3para funcionar a 6 Gb/s? > Muitos dizem que os cabos SATA 2 são iguais e também funcionam a 6Gb/s com > HDs SATA 3 > > Grato, > Gerson. > > > ------------------------------ > *De:* Gerson Haus <[email protected]> > *Para:* Lista Debian <[email protected]> > *Enviadas:* Sábado, 27 de Outubro de 2012 10:52 > *Assunto:* problema co SSD em SATA 6Gbps > > Pessoal, > > Estou com problema na instalação de um SSD KINGSTON SV200S364G em sata > 6.0 Gbps. > Queria dicas de como identifico se o problema é software ou hardware. E se > for software, como resolver. > > Informações adicionais (dmesg): > > ... > [ 1.756255] ata7: SATA link up 6.0 Gbps (SStatus 133 SControl 300) > ... > [ 1.768048] ata7.00: ATA-9: KINGSTON SV200S364G, E120506a, max UDMA/100 > [ 1.772041] ata7.00: 125045424 sectors, multi 16: LBA48 NCQ (depth > 31/32), AA > [ 1.776318] ata7.00: configured for UDMA/100 > ... > [ 3.323658] sd 3:0:0:0: [sdd] 125045424 512-byte logical blocks: (64.0 > GB/59.6 GiB) > [ 3.323698] sd 3:0:0:0: Attached scsi generic sg3 type 0 > [ 3.332379] sd 3:0:0:0: [sdd] Write Protect is off > [ 3.336622] sd 3:0:0:0: [sdd] Mode Sense: 00 3a 00 00 > [ 3.336640] sd 3:0:0:0: [sdd] Write cache: enabled, read cache: > enabled, doesn't support DPO or FUA > [ 3.342219] sdd: sdd1 > [ 3.346643] sd 3:0:0:0: [sdd] Attached SCSI disk > [ 3.640018] ata5: SATA link down (SStatus 0 SControl 300) > [ 3.964017] ata6: SATA link down (SStatus 0 SControl 300) > [ 3.968247] scsi 6:0:0:0: Direct-Access ATA KINGSTON SV200S3 > E120 PQ: 0 ANSI: 5 > [ 3.972554] sd 6:0:0:0: [sde] 125045424 512-byte logical blocks: (64.0 > GB/59.6 GiB) > [ 3.972593] sd 6:0:0:0: Attached scsi generic sg4 type 0 > [ 3.981060] sd 6:0:0:0: [sde] Write Protect is off > [ 3.985281] sd 6:0:0:0: [sde] Mode Sense: 00 3a 00 00 > [ 3.985302] sd 6:0:0:0: [sde] Write cache: enabled, read cache: > enabled, doesn't support DPO or FUA > [ 3.990028] sde: sde1 > [ 3.994480] sd 6:0:0:0: [sde] Attached SCSI disk > [ 4.472025] ata8: SATA link up 6.0 Gbps (SStatus 133 SControl 300) > [ 4.476870] ata8.00: ATA-8: ST3000DM001-9YN166, CC4C, max UDMA/133 > [ 4.481138] ata8.00: 5860533168 sectors, multi 0: LBA48 NCQ (depth > 31/32), AA > [ 4.485940] ata8.00: configured for UDMA/133 > [ 4.490208] scsi 7:0:0:0: Direct-Access ATA ST3000DM001-9YN1 > CC4C PQ: 0 ANSI: 5 > [ 4.494551] sd 7:0:0:0: [sdf] 5860533168 512-byte logical blocks: (3.00 > TB/2.72 TiB) > [ 4.494591] sd 7:0:0:0: Attached scsi generic sg5 type 0 > [ 4.503147] sd 7:0:0:0: [sdf] 4096-byte physical blocks > [ 4.507371] sd 7:0:0:0: [sdf] Write Protect is off > [ 4.511536] sd 7:0:0:0: [sdf] Mode Sense: 00 3a 00 00 > [ 4.511554] sd 7:0:0:0: [sdf] Write cache: enabled, read cache: > enabled, doesn't support DPO or FUA > [ 4.554367] sdf: sdf1 > [ 4.558728] sd 7:0:0:0: [sdf] Attached SCSI disk > [ 4.564439] Freeing unused kernel memory: 908k freed > ... > [ 5.793452] sd 10:0:0:2: [sdi] Attached SCSI removable disk > [ 34.848069] ata7.00: exception Emask 0x0 SAct 0x1 SErr 0x480000 action > 0x6 frozen > [ 34.851980] ata7: SError: { 10B8B Handshk } > [ 34.855891] ata7.00: failed command: READ FPDMA QUEUED > [ 34.859777] ata7.00: cmd 60/08:00:77:00:00/00:00:00:00:00/40 tag 0 ncq > 4096 in > [ 34.859778] res 40/00:00:00:00:00/00:00:00:00:00/00 Emask 0x4 > (timeout) > [ 34.867603] ata7.00: status: { DRDY } > [ 34.871540] ata7: hard resetting link > [ 35.364028] ata7: SATA link up 6.0 Gbps (SStatus 133 SControl 300) > [ 40.368029] ata7.00: qc timeout (cmd 0xef) > [ 40.371916] ata7.00: failed to set xfermode (err_mask=0x4) > [ 40.375754] ata7: hard resetting link > [ 40.868028] ata7: SATA link up 6.0 Gbps (SStatus 133 SControl 300) > [ 40.872280] ata7.00: configured for UDMA/100 > [ 40.876038] ata7.00: device reported invalid CHS sector 0 > [ 40.879672] ata7: EH complete > [ 71.808041] ata7.00: exception Emask 0x0 SAct 0x1 SErr 0x480000 action > 0x6 frozen > [ 71.811672] ata7: SError: { 10B8B Handshk } > [ 71.815249] ata7.00: failed command: READ FPDMA QUEUED > [ 71.818778] ata7.00: cmd 60/08:00:3f:03:00/00:00:00:00:00/40 tag 0 ncq > 4096 in > [ 71.818779] res 40/00:00:00:00:00/00:00:00:00:00/00 Emask 0x4 > (timeout) > [ 71.825810] ata7.00: status: { DRDY } > [ 71.829255] ata7: hard resetting link > [ 72.324025] ata7: SATA link up 6.0 Gbps (SStatus 133 SControl 300) > [ 72.328000] ata7.00: configured for UDMA/100 > [ 72.331470] ata7.00: device reported invalid CHS sector 0 > [ 72.334883] ata7: EH complete > [ 77.701659] EXT4-fs (sda7): mounted filesystem with ordered data mode. > Opts: (null) > [ 79.295558] udev: starting version 151 > > ... > [ 81.216465] ata7.00: exception Emask 0x10 SAct 0x1 SErr 0x800000 action > 0x6 frozen > [ 81.216638] ata7.00: irq_stat 0x08000000, interface fatal error > [ 81.216754] ata7: SError: { LinkSeq } > [ 81.216824] ata7.00: failed command: READ FPDMA QUEUED > [ 81.216924] ata7.00: cmd 60/08:00:b7:00:00/00:00:00:00:00/40 tag 0 ncq > 4096 in > [ 81.216925] res 40/00:00:57:00:00/00:00:00:00:00/40 Emask 0x10 > (ATA bus error) > [ 81.217229] ata7.00: status: { DRDY } > [ 81.217298] ata7: hard resetting link > [ 81.250129] snd_hda_intel 0000:00:1b.0: PCI INT A -> GSI 22 (level, > low) -> IRQ 22 > [ 81.250223] snd_hda_intel 0000:00:1b.0: irq 51 for MSI/MSI-X > [ 81.250246] snd_hda_intel 0000:00:1b.0: setting latency timer to 64 > [ 81.631349] hda_codec: ALC889A: BIOS auto-probing. > [ 81.638635] input: HDA Intel Headphone as > /devices/pci0000:00/0000:00:1b.0/sound/card0/input5 > [ 81.638798] snd_hda_intel 0000:01:00.1: PCI INT B -> GSI 17 (level, > low) -> IRQ 17 > [ 81.638865] snd_hda_intel 0000:01:00.1: irq 52 for MSI/MSI-X > [ 81.638886] snd_hda_intel 0000:01:00.1: setting latency timer to 64 > [ 81.666719] HDMI status: Codec=0 Pin=3 Presence_Detect=0 ELD_Valid=0 > [ 81.666811] input: HD-Audio Generic HDMI/DP,pcm=3 as > /devices/pci0000:00/0000:00:01.0/0000:01:00.1/sound/card1/input6 > [ 81.708055] ata7: SATA link up 6.0 Gbps (SStatus 133 SControl 300) > [ 82.315510] r8169 0000:05:00.0: eth0: link down > [ 82.316275] ADDRCONF(NETDEV_UP): eth0: link is not ready > [ 84.333801] ADDRCONF(NETDEV_UP): wlan0: link is not ready > [ 84.337512] r8169 0000:06:00.0: eth1: link down > [ 84.338218] ADDRCONF(NETDEV_UP): eth1: link is not ready > [ 86.708030] ata7.00: qc timeout (cmd 0xef) > [ 86.708041] ata7.00: failed to enable AA (error_mask=0x4) > [ 86.708156] ata7.00: revalidation failed (errno=-5) > [ 86.708245] ata7: hard resetting link > [ 87.200035] ata7: SATA link up 6.0 Gbps (SStatus 133 SControl 300) > [ 87.200075] ata7.00: failed to IDENTIFY (I/O error, err_mask=0x100) > [ 87.200078] ata7.00: revalidation failed (errno=-5) > [ 87.200189] ata7: limiting SATA link speed to 3.0 Gbps > [ 92.200031] ata7: hard resetting link > [ 92.692025] ata7: SATA link up 3.0 Gbps (SStatus 123 SControl 320) > [ 92.692462] ata7.00: configured for UDMA/100 > [ 92.692471] ata7: EH complete > [ 94.338238] EXT4-fs (sda7): re-mounted. Opts: errors=remount-ro > ... > > > Grato, > Gerson. > > >
