está normal, gabriel. funcionando. nem precisou usar o mii-tool. 2013/5/6 Gabriel Ricardo <[email protected]>: > tenta com ifup, e cole para nos sua configuração > > > Atenciosamente, > Gabriel Ricardo > Consultor em Tecnologia > Cel.: (41) 8881-7828 > Skype: gabriel.nerdworkti > Facebook: facebook.com/nerdworkti > Site: www.nerdworkti.com.br > > > 2013/5/6 Fred Maranhão <[email protected]> >> >> beleza. configurando a eth2 no /etc/network/interfaces, mesmo sem >> aparecer no ifconfig, quando dou um /etc/init.d/networking restart, >> sobe normal. >> >> Em 6 de maio de 2013 11:23, Gabriel Ricardo <[email protected]> >> escreveu: >> > - configurar interface no arquivo interfaces >> > - testar conectividade com dmesg ou mii-tool >> > - ifup, ifdown >> > >> > >> > Atenciosamente, >> > Gabriel Ricardo >> > Consultor em Tecnologia >> > Cel.: (41) 8881-7828 >> > Skype: gabriel.nerdworkti >> > Facebook: facebook.com/nerdworkti >> > Site: www.nerdworkti.com.br >> > >> > >> > 2013/5/6 Fred Maranhão <[email protected]> >> >> >> >> Em 6 de maio de 2013 10:13, Gabriel Ricardo <[email protected]> >> >> escreveu: >> >> > dmesg | grep -i eth >> >> >> >> # dmesg | grep -i eth >> >> [ 1.929416] e1000: eth0: e1000_probe: Intel(R) PRO/1000 Network >> >> Connection >> >> [ 2.295511] e1000: eth1: e1000_probe: Intel(R) PRO/1000 Network >> >> Connection >> >> [ 2.658719] e1000: eth2: e1000_probe: Intel(R) PRO/1000 Network >> >> Connection >> >> [ 6.015144] e1000: eth0 NIC Link is Up 1000 Mbps Full Duplex, Flow >> >> Control: None >> >> [ 6.017763] ADDRCONF(NETDEV_UP): eth0: link is not ready >> >> [ 6.019724] ADDRCONF(NETDEV_CHANGE): eth0: link becomes ready >> >> [ 6.028688] ADDRCONF(NETDEV_UP): eth1: link is not ready >> >> [ 6.030580] e1000: eth1 NIC Link is Up 1000 Mbps Full Duplex, Flow >> >> Control: None >> >> [ 6.033055] ADDRCONF(NETDEV_CHANGE): eth1: link becomes ready >> >> [ 16.461526] eth0: no IPv6 routers present >> >> [ 16.555927] eth1: no IPv6 routers present >> >> >> >> por que o eth2 não fica "becomes ready" >> > >> > >> >> >> -- >> To UNSUBSCRIBE, email to [email protected] >> with a subject of "unsubscribe". Trouble? Contact >> [email protected] >> Archive: >> http://lists.debian.org/[email protected] >> >
-- To UNSUBSCRIBE, email to [email protected] with a subject of "unsubscribe". Trouble? Contact [email protected] Archive: http://lists.debian.org/CAPr829`[email protected]
