Já tentaste usar oss (ou emulação oss)?? Tenho essa placa de som e funciona muito bem com emulação oss.
HIHU []'s --- Rodrigo Gressler <[EMAIL PROTECTED]> escreveu: > Boa tarde a todos, > > Estou com problemas para instalar uma placa de som > no Debian stable. É > um placa Ensoniq ES1371 [AudioPCI-97] (rev 08). Não > sei se alguém já > passou por isso ou tem alguma dica para me dar. > > Estou usando os fontes do alsa-driver, alsa-lib e > alsa-utils [1] na > versão 1.0.8 (latest). > > Seguindo a documentação deles [2], quando dou um > # modprobe snd-ens1371 > > A resposta é: > /lib/modules/2.4.21/kernel/sound/pci/snd-ens1371.o: > init_module: No such > device > Hint: insmod errors can be caused by incorrect > module parameters, > including invalid IO or IRQ parameters > /lib/modules/2.4.21/kernel/sound/pci/snd-ens1371.o: > insmod > /lib/modules/2.4.21/kernel/sound/pci/snd-ens1371.o > failed > /lib/modules/2.4.21/kernel/sound/pci/snd-ens1371.o: > insmod snd-ens1371 > failed > > Estou colocando em anexo as saídas do lspci -vv e > /proc/interrupts. > > Já tentei tanto um kernel compilado com o som em > módulo (CONFIG_SOUND=m) > e em built-in (CONFIG_SOUND=Y) > > Se alguém tiver alguma luz para me dar, agradeço. > > Um abraço, > Rodrigo Gressler > > -- > [1] http://alsa-project.org > [2] > <http://alsa-project.org/alsa-doc/doc-php/template.php?company=Ensoniq&card=.&chip=ES1371%2C+ES1372%2C+ES1373%2C+CT5880+%28ES1373%29&module=ens1371> > > 00:00.0 Host bridge: VIA Technologies, Inc. > VT82C693A/694x [Apollo PRO133x] (rev c4) > Subsystem: Asustek Computer, Inc.: Unknown device > 8017 > Control: I/O- Mem+ BusMaster+ SpecCycle- MemWINV- > VGASnoop- ParErr- Stepping- SERR- FastB2B- > Status: Cap+ 66Mhz- UDF- FastB2B- ParErr- > DEVSEL=medium >TAbort- <TAbort- <MAbort+ >SERR- > <PERR- > Latency: 0 > Region 0: Memory at e7800000 (32-bit, prefetchable) > [size=4M] > Capabilities: [a0] AGP version 2.0 > Status: RQ=31 SBA+ 64bit- FW- Rate=x1,x2 > Command: RQ=0 SBA- AGP- 64bit- FW- Rate=<none> > Capabilities: [c0] Power Management version 2 > Flags: PMEClk- DSI- D1- D2- AuxCurrent=0mA > PME(D0-,D1-,D2-,D3hot-,D3cold-) > Status: D0 PME-Enable- DSel=0 DScale=0 PME- > > 00:01.0 PCI bridge: VIA Technologies, Inc. > VT82C598/694x [Apollo MVP3/Pro133x AGP] (prog-if 00 > [Normal decode]) > Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- > VGASnoop- ParErr- Stepping- SERR- FastB2B- > Status: Cap+ 66Mhz+ UDF- FastB2B- ParErr- > DEVSEL=medium >TAbort- <TAbort- <MAbort+ >SERR- > <PERR- > Latency: 0 > Bus: primary=00, secondary=01, subordinate=01, > sec-latency=0 > I/O behind bridge: 0000d000-0000dfff > Memory behind bridge: e6000000-e6dfffff > Prefetchable memory behind bridge: > e6f00000-e77fffff > BridgeCtl: Parity- SERR- NoISA- VGA+ MAbort- > >Reset- FastB2B- > Capabilities: [80] Power Management version 2 > Flags: PMEClk- DSI- D1+ D2- AuxCurrent=0mA > PME(D0-,D1-,D2-,D3hot-,D3cold-) > Status: D0 PME-Enable- DSel=0 DScale=0 PME- > > 00:04.0 ISA bridge: VIA Technologies, Inc. VT82C596 > ISA [Mobile South] (rev 23) > Subsystem: Asustek Computer, Inc.: Unknown device > 8017 > Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- > VGASnoop- ParErr- Stepping+ SERR- FastB2B- > Status: Cap- 66Mhz- UDF- FastB2B- ParErr- > DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- > <PERR- > Latency: 0 > > 00:04.1 IDE interface: VIA Technologies, Inc. Bus > Master IDE (rev 10) (prog-if 8a [Master SecP PriP]) > Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- > VGASnoop- ParErr- Stepping+ SERR- FastB2B- > Status: Cap+ 66Mhz- UDF- FastB2B+ ParErr- > DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- > <PERR- > Latency: 32 > Region 4: I/O ports at b800 [size=16] > Capabilities: [c0] Power Management version 2 > Flags: PMEClk- DSI- D1- D2- AuxCurrent=0mA > PME(D0-,D1-,D2-,D3hot-,D3cold-) > Status: D0 PME-Enable- DSel=0 DScale=0 PME- > > 00:04.3 Host bridge: VIA Technologies, Inc. VT82C596 > Power Management (rev 30) > Control: I/O- Mem- BusMaster- SpecCycle- MemWINV- > VGASnoop- ParErr- Stepping- SERR- FastB2B- > Status: Cap- 66Mhz- UDF- FastB2B+ ParErr- > DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- > <PERR- > > 00:09.0 Multimedia audio controller: Ensoniq ES1371 > [AudioPCI-97] (rev 08) > Subsystem: Ensoniq Creative Sound Blaster > AudioPCI64V, AudioPCI128 > Control: I/O+ Mem- BusMaster+ SpecCycle- MemWINV- > VGASnoop- ParErr- Stepping- SERR- FastB2B- > Status: Cap+ 66Mhz- UDF- FastB2B- ParErr- > DEVSEL=slow >TAbort- <TAbort- <MAbort- >SERR- <PERR- > Latency: 32 (3000ns min, 32000ns max) > Interrupt: pin A routed to IRQ 10 > Region 0: I/O ports at b000 [size=64] > Capabilities: [dc] Power Management version 1 > Flags: PMEClk- DSI+ D1- D2+ AuxCurrent=0mA > PME(D0-,D1-,D2-,D3hot-,D3cold-) > Status: D0 PME-Enable- DSel=0 DScale=0 PME- > > 00:0c.0 Ethernet controller: Intel Corp. 82557 > [Ethernet Pro 100] (rev 09) > Subsystem: Intel Corp. EtherExpress PRO/100+ > Management Adapter > Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV+ > VGASnoop- ParErr- Stepping- SERR- FastB2B- > Status: Cap+ 66Mhz- UDF- FastB2B+ ParErr- > DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- > <PERR- > Latency: 32 (2000ns min, 14000ns max), cache line > size 08 > Interrupt: pin A routed to IRQ 11 > Region 0: Memory at e5800000 (32-bit, > non-prefetchable) [size=4K] > Region 1: I/O ports at a800 [size=64] > Region 2: Memory at e5000000 (32-bit, > non-prefetchable) [size=128K] > Expansion ROM at <unassigned> [disabled] [size=1M] > Capabilities: [dc] Power Management version 2 > Flags: PMEClk- DSI+ D1+ D2+ AuxCurrent=0mA > PME(D0+,D1+,D2+,D3hot+,D3cold+) > Status: D0 PME-Enable- DSel=0 DScale=2 PME- > > 01:00.0 VGA compatible controller: Silicon > Integrated Systems [SiS] 86C326 (rev 0b) (prog-if 00 > [VGA]) > Subsystem: Silicon Integrated Systems [SiS] SiS6326 > GUI Accelerator > Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- > VGASnoop- ParErr- Stepping- SERR- FastB2B- > Status: Cap+ 66Mhz+ UDF- FastB2B- ParErr- > DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- > <PERR- > Latency: 64 (500ns min) > Region 0: Memory at e7000000 (32-bit, prefetchable) > [size=8M] > Region 1: Memory at e6000000 (32-bit, > non-prefetchable) [size=64K] > Region 2: I/O ports at d800 [size=128] > Expansion ROM at e6ff0000 [disabled] [size=64K] > Capabilities: [40] Power Management version 1 > Flags: PMEClk- DSI- D1- D2+ AuxCurrent=0mA > PME(D0-,D1-,D2-,D3hot-,D3cold-) > Status: D0 PME-Enable- DSel=0 DScale=0 PME- > Capabilities: [50] AGP version 1.0 > Status: RQ=1 SBA- 64bit- FW- Rate=x1,x2 > Command: RQ=0 SBA- AGP- 64bit- FW- Rate=<none> > > > CPU0 > 0: 29734 XT-PIC timer > 1: 2 XT-PIC keyboard > 2: 0 XT-PIC cascade > 8: 3 XT-PIC rtc > 9: 0 XT-PIC acpi > 10: 0 XT-PIC es1371 > 11: 5681 XT-PIC eth0 > 14: 7106 XT-PIC ide0 > NMI: 0 > ERR: 0 > _______________________________________________________ Yahoo! Acesso Grátis - Instale o discador do Yahoo! agora. http://br.acesso.yahoo.com/ - Internet rápida e grátis
