sim sim penso que sao aqueles ali... Backups:~# lsmod Module Size Used by ipv6 252000 - shpchp 40888 - pci_hotplug 13028 - via_agp 9952 - agpgart 34832 - ehci_hcd 30248 - usbcore 128992 - sata_via 8932 - libata 71244 - via_rhine 23428 - mii 5728 - crc32 4160 - w83781d 32008 - hwmon_vid 2880 - i2c_isa 4608 - i2c_viapro 8564 - i2c_core 20976 - sd_mod 19504 - scsi_mod 142440 - ide_cd 42244 - cdrom 42112 - rtc 12308 - ext3 141608 - jbd 55668 - ide_disk 17536 - ide_generic 1280 - via82cxxx 9156 - trm290 4420 - triflex 3840 - slc90e66 5792 - sis5513 16168 - siimage 12352 - serverworks 9352 - sc1200 7520 - rz1000 2656 - piix 10436 - pdc202xx_old 11168 - opti621 4484 - ns87415 4424 - hpt366 19680 - hpt34x 5344 - generic 4452 - cy82c693 4836 - cs5530 5376 - cmd64x 12060 - atiixp 5968 - amd74xx 14140 - alim15x3 12332 - aec62xx 7488 - pdc202xx_new 9088 - ide_core 124348 - unix 26320 - Backups:~#
Heitor Moraes escreveu:
tu colocou os modulos pra carregar? Dá um lsmod e vê se estão carregados. 2006/10/12, Filipe Silva <[EMAIL PROTECTED]>:Boas. Tenho um Linux Backups 2.6.17.13 #1 Fri Sep 15 15:52:12 WEST 2006 i686 GNU/Linux actualizei o kernel quase so pra ver se conseguia meter os sensores a funcionarem mas nao tive sucesso. corro o sensors-detect de varias maneiras e nao ha forma de dar, diz sempre no sensors found! a motherboard que possuo é a asrock p4vt8+ no sensors-detect, se meter tudo a yes, ele detecta-me isto: Driver `eeprom' (should be inserted): Detects correctly: * Bus `SMBus Via Pro adapter at 0400' Busdriver `i2c-viapro', I2C address 0x50 Chip `SPD EEPROM' (confidence: 8) Driver `w83781d' (should be inserted): Detects correctly: * ISA bus address 0x0290 (Busdriver `i2c-isa') Chip `Winbond W83697HF' (confidence: 8) Driver `w83627hf' (should be inserted): Detects correctly: * ISA bus address 0x0295 (Busdriver `i2c-isa') Chip `Winbond W83697HF Super IO Sensors' (confidence: 9) e depois, dá isto pra meter no modules: # I2C adapter drivers i2c-viapro i2c-isa # I2C chip drivers # Warning: the required module eeprom is not currently installed on your system. # For status of 2.6 kernel ports see http://secure.netroedge.com/~lm78/supported.html # If driver is built-in to the kernel, or unavailable, comment out the following line. eeprom w83781d # Warning: the required module w83627hf is not currently installed on your system. # For status of 2.6 kernel ports see http://secure.netroedge.com/~lm78/supported.html # If driver is built-in to the kernel, or unavailable, comment out the following line. w83627hf ate rebootei a maquina, e: Backups:~# sensors No sensors found! Obrigado desde já pela ajuda. -- To UNSUBSCRIBE, email to [EMAIL PROTECTED]with a subject of "unsubscribe". Trouble? Contact [EMAIL PROTECTED]
-- To UNSUBSCRIBE, email to [EMAIL PROTECTED] with a subject of "unsubscribe". Trouble? Contact [EMAIL PROTECTED]
