Durante 4, us� Mandrake y sus asistentes. Cuando m�s o menos entend�a qu� hac�a, cambi� a Debian.
Luego de pelearme durante un mes con los perif�ricos, decid� que era hora de juagar en serio.
No puedo configurar el arranque de LILO con otro kernel. Me explico:
Instal� la imagen 2.4.18-bf2.4 que me da como opci�n el instalador de la revisi�n 3.0 r2 Woody.
Con el APT cargu� la 2.5.18-586tsc.
Seg�n el sistema, estuvo bien, pero no me deja levantar la imagen 586 (tengo un PIII 750 Mhz).
Inicia la carga, y se detiene con el siguiente mensaje (�ltimos 4 renglones, donde empiezan mensajes de problemas):
request_module[block-major3]: Rooot not mounted VFS: Cannot open root device "345" or 03:45 Please append a correct device "root=" boot option Kernel panic: VFS: Unable mount root fs on 03:45
Le� LILO y todos sus manuales, HowTo de kernel y los etc�teras que se les ocurran: Me rindo.
Adjunto el lilo.conf para que si alguien pueda tenderme una mano, me ayude. Es mi intenci�n en poco instalar el kernel 2.6. Si tengo problemas en un arranque dual con algo que ya viene en la distribuci�n, no quiero imaginar qu� me puede pasar con algo que compile.
Gracias.
Javier
------------------------------------------------------------------------------------------------------------------------- /etc/lilo.conf
# /etc/lilo.conf - See: `lilo(8)' and `lilo.conf(5)', # --------------- `install-mbr(8)', `/usr/share/doc/lilo/', # and `/usr/share/doc/mbr/'.
# +---------------------------------------------------------------+ # | !! Reminder !! | # | | # | Don't forget to run `lilo' after you make changes to this | # | conffile, `/boot/bootmess.txt', or install a new kernel. The | # | computer will most likely fail to boot if a kernel-image | # | post-install script or you don't remember to run `lilo'. | # | | # +---------------------------------------------------------------+
# Support LBA for large hard disks. # lba32
# Overrides the default mapping between harddisk names and the BIOS' # harddisk order. Use with caution. #disk=/dev/hde # bios=0x81
#disk=/dev/sda # bios=0x80
# Specifies the boot device. This is where Lilo installs its boot # block. It can be either a partition, or the raw device, in which # case it installs in the MBR, and will overwrite the current MBR. # boot=/dev/hda
# Specifies the device that should be mounted as root. (`/') # root=/dev/hdb5
# Enable map compaction: # Tries to merge read requests for adjacent sectors into a single # read request. This drastically reduces load time and keeps the # map smaller. Using `compact' is especially recommended when # booting from a floppy disk. It is disabled here by default # because it doesn't always work. # # compact
# Installs the specified file as the new boot sector # You have the choice between: bmp, compat, menu and text # Look in /boot/ and in lilo.conf(5) manpage for details # install=/boot/boot-menu.b
# Specifies the location of the map file # map=/boot/map
# You can set a password here, and uncomment the `restricted' lines # in the image definitions below to make it so that a password must # be typed to boot anything but a default configuration. If a # command line is given, other than one specified by an `append' # statement in `lilo.conf', the password will be required, but a # standard default boot will not require one. # # This will, for instance, prevent anyone with access to the # console from booting with something like `Linux init=/bin/sh', # and thus becoming `root' without proper authorization. # # Note that if you really need this type of security, you will # likely also want to use `install-mbr' to reconfigure the MBR # program, as well as set up your BIOS to disallow booting from # removable disk or CD-ROM, then put a password on getting into the # BIOS configuration as well. Please RTFM `install-mbr(8)'. # # password=tatercounter2000
# Specifies the number of deciseconds (0.1 seconds) LILO should # wait before booting the first image. # delay=20
# You can put a customized boot message up if you like. If you use # `prompt', and this computer may need to reboot unattended, you # must specify a `timeout', or it will sit there forever waiting # for a keypress. `single-key' goes with the `alias' lines in the # `image' configurations below. eg: You can press `1' to boot # `Linux', `2' to boot `LinuxOLD', if you uncomment the `alias'. # # message=/boot/bootmess.txt prompt timeout=50
# prompt # single-key # delay=100 # timeout=100
# Specifies the VGA text mode at boot time. (normal, extended, ask, <mode>) # # vga=ask # vga=9 # vga=normal
# Kernel command line options that apply to all installed images go # here. See: The `boot-prompt-HOWO' and `kernel-parameters.txt' in # the Linux kernel `Documentation' directory. # # append=""
# Boot up Linux by default. #
default=Windows
other=/dev/hda2 label=Windows
image=/vmlinuz.bf label=LinuxBF24 read-only # restricted # alias=1
image=/vmlinuz.586 label=Linux586 read-only root=/dev/hdb5 # restricted # alias=1
# If you have another OS on this machine to boot, you can uncomment the # following lines, changing the device name on the `other' line to # where your other OS' partition is. # # other=/dev/hda4 # label=HURD # restricted # alias=3
-- To UNSUBSCRIBE, email to [EMAIL PROTECTED] with a subject of "unsubscribe". Trouble? Contact [EMAIL PROTECTED]
