El jue, 19-05-2005 a las 12:30 -0500, Herwin Huillcen escribi�: > Gracias mario, efectivamente en el dmesg sale error, es el siguiente: > > ************* > > usb 4-6: new high speed USB device using address 3 > scsi0 : SCSI emulation for USB Mass Storage devices > Vendor: Kingston Model: DataTraveler 2.0 Rev: 6.00 > Type: Direct-Access ANSI SCSI revision: 02 > USB Mass Storage device found at 3 > SCSI device sda: 1001472 512-byte hdwr sectors (513 MB) > sda: assuming Write Enabled > sda: assuming drive cache: write through > /dev/scsi/host0/bus0/target0/lun0: [CUMANA/ADFS] p1<5>Attached scsi > removable disk sda at scsi0, channel 0, id 0, lun 0 > Buffer I/O error on device sda1, logical block 508378384 > Buffer I/O error on device sda1, logical block 508378385 > Buffer I/O error on device sda1, logical block 508378386 > Buffer I/O error on device sda1, logical block 508378387 > Buffer I/O error on device sda1, logical block 508378388 > Buffer I/O error on device sda1, logical block 508378389 > Buffer I/O error on device sda1, logical block 508378390 > Buffer I/O error on device sda1, logical block 508378391 > Buffer I/O error on device sda1, logical block 508378392 > Buffer I/O error on device sda1, logical block 508378393 > Buffer I/O error on device sda1, logical block 508378394 > Buffer I/O error on device sda1, logical block 508378395 > Buffer I/O error on device sda1, logical block 508378396 > Buffer I/O error on device sda1, logical block 508378397 > Buffer I/O error on device sda1, logical block 508378398 > Buffer I/O error on device sda1, logical block 508378399 > Buffer I/O error on device sda1, logical block 508378384 > FAT: invalid media value (0xb9) > VFS: Can't find a valid FAT filesystem on dev sda1. > FAT: invalid media value (0xb9) > VFS: Can't find a valid FAT filesystem on dev sda. > FAT: invalid media value (0xb9) > VFS: Can't find a valid FAT filesystem on dev sda. > autofs: called with bogus options > FAT: invalid media value (0xb9) > VFS: Can't find a valid FAT filesystem on dev sda1. > autofs: called with bogus options > ************************************* > > que puedo hacer para solucionar esto >
Guarda los datos a trav�s de un windows si lo haces funcionar y format�ala, a veces estas memorias se corrompe la TOC (tabla de contenidos) y no funcionan. No pasa a menudo pero pasa a veces. Procura formatearla desde linux, asi funcionar� bien en linux y windows: mkfs.vfat /dev/sda1 > On 5/19/05, mario <[EMAIL PROTECTED]> wrote: > > El jue, 19-05-2005 a las 11:56 -0500, Herwin Huillcen escribi�: > > > Saludos amigos. > > > > > > Resulta que acabo de instalar debian sarge con kernel 2.6.8 en una > > > maquina P IV, todo esta bie, pero no se porque no reconoce mi memoria > > > flash USB, es una KINGSTON de 512 MB. > > > > > > yo se que se necesitael modulo usb-storage, hot-plug, uhci, usbcore > > > como ustdes puede ver, la dar "lsmod" sale lo siguiente: > > > > > > **************** > > > debian:/etc# lsmod > > > Module Size Used by > > > > > ehci_hcd 27908 0 > > > uhci_hcd 29328 0 > > > > > vfat 13184 1 > > > fat 41792 1 vfat > > > > > scsi_mod 115148 1 usb_storage > > > > > usbcore 104164 6 ehci_hcd,uhci_hcd,usb_storage,ndiswrapper > > > > con haber puesto estos m�dulos val�a.... > > > > �que dice dmesg despu�s de enchufar el pendrive? > > > > > > -- > > To UNSUBSCRIBE, email to [EMAIL PROTECTED] > > with a subject of "unsubscribe". Trouble? Contact [EMAIL PROTECTED] > > > > > -- To UNSUBSCRIBE, email to [EMAIL PROTECTED] with a subject of "unsubscribe". Trouble? Contact [EMAIL PROTECTED]
