|
Adjunto configuracion de P3scan para habilitar un gateway antivirus. ESTA ES LA REGLA QUE APLICO AL IPTABLES PARA QUE FUNCIONE : ########################################################################### #habilito el p3scan con prerouting iptables -I INPUT -s 192.168.1.0/24 -p tcp --dport 8110 -j ACCEPT iptables -t nat -I PREROUTING -s 192.168.1.0/24 -d ! 192.168.1.0/24 -p tcp --dport 110 -j REDIRECT --to-port 8110 ########################################################################## A CONTINUACION EL ARCHIVO DE CONFIGURACION , EN MI CASO HABILITE TANTO EL ANTIVIRUS COMO EL ANTISPAM. USANDO CLAM ANTIVIRUS Y SPAMASSASIN ########################################################################## # # # P3Scan Version 1.0 # # # # default configuration file # # all params are set to default # # # ########################################################################## # (C) 2003/2004 by Jack S. Lai <[EMAIL PROTECTED]> # This program is free software; you can redistribute it and/or modify # it under the terms of the GNU General Public License as published by # the Free Software Foundation; either version 2 of the License, or # (at your option) any later version. # # This program is distributed in the hope that it will be useful, # but WITHOUT ANY WARRANTY; without even the implied warranty of # MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the # GNU General Public License for more details. # # You should have received a copy of the GNU General Public License # along with this program; if not, write to the Free Software # Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA 02111-1307 USA # # PID File # # where to write a pid-file # # default: /var/run/p3scan/p3scan.pid # pidfile = /var/run/p3scan/p3scan.pid # # Max Childs # # The maximum number of connections we will handle at once. Any further # connections will be dropped. Keep in mind that a number of 10 also # means that 10 viruscanner can run at once. # # default: 10 # maxchilds = 10 # # IP Address # # The IP Address we listen on default: 0.0.0.0 (any address) # ip = 0.0.0.0 # # Port # # The tcp port on we should listen. If you need a privileged port you # need to start p3scan as root (but don't set username to root, # that's not necessary, because first after opening the port we will # switch to that user). # # default: 8110 # port = 8110 # # Username # # The username the daemon should run as. Takes no effect when you # start as a non-root user. # # default: mail # user = mail # # Notify Directory # # Create notification mails in <DIR>. Also used for temporary storage. # # default: /var/spool/p3scannotify # notifydir = /var/spool/p3scan/notify # # Virus Directory # # The directory in which infected mails will be stored. It is also # used for temporary storing. Ensure that the above specified user is # allowed to write into! # # default: /var/spool/p3scan # virusdir = /var/spool/p3scan # # Just Delete # # Instead of keeping an infected message in the Virus Directory, delete # it after reporting it to the user. # # default: Keep infected messages in Virus Directory # justdelete # # Bytes Free # # The number of KB's there must be free before processing any mail. # If there is less than this amount, p3scan will terminate any # connections until the problem is resolved. # # default: bytesfree = 0 (disable checking for space) # Sample: If you want to ensure 100MB are free #bytesfree = 0 # # Scanner Type # # Select here which type of scanner you want to use. # At the moment you can choose between 'basic' and 'avpd'. # # Basic: # # This is the default. The configured executable (set in variable # scanner) will be invoked. You can also specify parameters (we are # using /bin/sh). At the end the path to the mail and a "2>&1" is # appended. The program can tell us if it's a virus returning Scanner # Returncode (see below) or exit code 0 means, which all ok, all # others are reported to syslog, but mails will be delivered unless # justdelete is enabled above. The output is scanned using a regular # _expression_ which describes where the virusname can be found # (see virusregexp). # # If demime is not set 'path to mail' is the full filename to the # rfc822 message, which you MUST NOT DELETE or MODIFY (except you know # how to modify)! If your scanner can not handle rfc822 messages (e.g. # McAfee uvscan) set demime and 'path to mail' is a directory which # contains all MIME-Parts splitted into separate files. That files are # not needed after scanning, so p3scan deletes them. # # You will find a sample-configuration for McAfee's uvscan # (http://www.mcafee.com/) in the below sections. # # # AVPD: # # AVPD is a frontend to 'Kaspersky Anti-Virus for Linux' # (http://www.kaspersky.com/) , which provides a daemon named # 'kavdaemon'. Once the daemon has been started we connect to # kavdaemons socket and tell what files to scan. This gives a rapid # speed increasement since the virus-definitions and other # scanner-initialization has only to be done once! Here a result from # a speedtest which I've made: Running kavdaemon, quallcomms qpopper # and p3scan on an Intel P1 with 133MHz and 64MB RAM a client using # Netscape-Mail was able to fetch 500 mails (including POP3- UIDL- # setting) in 62 seconds (each mail sized 2kByte)! # # We just need to know in which directory your kavdaemon writes the # socket 'AvpCtl' and file 'AvpPid', default is '/var/run', which is # ok using AVP-default installation, leave in that case the below # variable scanner commented, otherwise set there the path. Parameter # viruscode and virusregexp will not be used. # # Actual versions of avpd can't handle rcf822, so set demime (this is # not standard, it's possible that Kaspersky Labs includes rfc822 # checking in further releases). # # Important note about using kavdaemon: # # Ensure that virusdir (/var/spool/p3scan) is included in AVPs # 'enabled path list', otherwise the mails will not be scanned, but # kavdaemon returns ok (I've found no way to check if the mail has # been scanned or not). Mail yourself the eicar.com testvirus (from # http://www.eicar.com ) to check it!). The 'enabled path' can be set # in /opt/AVP/defUnix.prf in the 'Names' line (add # ';*/var/spool/p3scan'). Also check if there is a config file in # /root/.AVP/ which has higher precedence (if kavdaemon runs a root, # otherwise check that users $HOME/.AVP ). # # # TROPHIE: # # Trophie is an OpenSource Anti-Virus Daemon, which uses the # virus-scanengine and -database from Trend Antivirus. Trophie can be # found at http://www.vanja.com/tools/trophie/ . Configuration is very # simple, just set scannertype to 'trophie' and it should work. If you # don't use trophies standard-config you have to set scanner to the # trophie socket. # # # default: basic # scannertype = basic # # Virusscanner # # Depends on scannertype. Read the above section of that scannertype # you're going to use and you do not need to ask what to fill in here. # # default: depending on scannertype: # basic : <no default> # avpd : /var/run/ # trophie : /var/run/trophie # # # Sample: scannertype basic using McAfee UVSCAN: # scanner = /usr/local/uvscan/uvscan # Sample: scannertype basic using FRISK F-Prot Antivirus: scanner = /usr/bin/clamscan --disable-summary # # deMIME Setting # # Uncomment this if we should parse all MIME-sections instead of passing # the as-it-is mail to the scanner. # # default: <no demime> # demime # # Scanner Returncode # # Specify the returncode(s) which the scanner returns when the mail is # infected. P3Scan does its part (sending the notification and not the # infected mail) only when it gets the specified returncode(s). # A returncode value of 0 from the scanner is assumed to mean that the # message is clean. Any other unspecified value will add warning lines # to your logfiles but THE MESSAGE WILL BE DELIVERED! # # Only used from scannertype 'basic'. # # default: 1 # # Sample: scannertype basic using McAfee UVSCAN: # viruscode = 13 # Sample: scannertype basic using FRISK F-Prot Antivirus: # viruscode = 3,8 # # Regular _expression_ for Virusname # # Specify here a regular _expression_ which describes where the name of the # virus can be found. If not specified, the first substring is used; # specify it appending '/' and the substring number (1-9) at the end. # PerlCompatibleRegularExpressions are used, case sensitive and the # ungreedy option. Only used by scannertype 'basic'. # # default: <none> # # Sample: McAfee UVSCAN # virusregexp = ^[[:space:]]*Found( the|:)[[:space:]]*(.*)[[:space:]]*(|virus[^a-z.]*)$/2 # Sample: FRISK F-Prot Antivirus # virusregexp = (?=Infection\:)[[:space:]]*(.*)$ # Enable Spam checking # # If set, will scan for Spam before scanning for a virus. # # P3scan has been tested with Mail::SpamAssassin v2.6 and it # uses the interface spamd/spamc. # # You should start spamd before running p3scan. For example: # "spamd -L -d" (run in local mode only, daemonize) # man spamd for more information. # # default: no checking of spam checkspam # # Mail::SpamAssassin # # Where to find spamc, the link to the SpamAssassin daemon spamd. # spamcheck = /usr/bin/spamc # # Rename Attachments # # If renattach is installed and this option is un-commented, we # will execute renattach to rename dangerous attachments. # (See README for more information) # # default: none # #renattach = /usr/local/bin/renattach # # Overwrite (disable) HTML # # If a person views an HTML message, not only can the client # download pictures automatically, it enables someone viewing # the remote log file to confirm the email address is valid # make it "worth" keeping/selling, etc... # # default: do not disable HTML # #overwrite # # Debug # # Turn on debugging. # # default: off # debug # # Quiet # # Disable reporting of normal operating messages. Only report errors # or critical information. # # default: display all less debug info # quiet # # Template # # Where to look for an email-template when our own mail has to be send # instead of an infected mail. That file has to be exist, otherwise # p3scan will send an RFC unconform -ERR and closes the connections. # The email-template should be a complete email, that means a # mail-header (to, from, subject, date) , specify also content-type, and # so on. Also the leading dot is necessary (just a dot and no more in # the last line). You can use some key- words which will be replaced # when sending, e.g. %MAILDATE%. # default: /etc/p3scan/p3scan.mail # template = /etc/p3scan/p3scan.mail # END of configuration Miguel Morales escribió:
|
