El dom, 22-01-2006 a las 16:53 +0100, Daniel Garcia escribió: > Buenos días, > > Tengo un portatil Dell con una grabadora NEC DVD+/-RW ND-6650A y he > intentado grabar cds con cdrecord utilizando el comando como root (aunq > no tendría q ser necesario) > > cdrecord dev=/dev/hdc Imagen.iso > > Tengo la Debian testing y utilizo el núcleo 2.6.14 con el ide-cd. > > CdRecord empieza a grabar pero al poco da un error se para la grabación. > Al intentar leer el Cd despues se ven los archivo pero dan error al > copiar, da la impresión que solo pudo grabar la tabla donde están los > archivos. > > Alguna idea? > > Daniel > > P.S.: lo que me dice el cdrecord es lo siguiente: > > cdrecord: Warning: Running on Linux-2.6.14.2 > cdrecord: There are unsettled issues with Linux-2.5 and newer. > cdrecord: If you have unexpected problems, please try Linux-2.4 or Solaris. > scsidev: '/dev/hdc' > devname: '/dev/hdc' > scsibus: -2 target: -2 lun: -2 > Warning: Open by 'devname' is unintentional and not supported. > Linux sg driver version: 3.5.27 > Error: Cannot gain SYS_RAWIO capability.Is cdrecord installed SUID root? > : Operation not permitted > Using libscg version 'ubuntu-0.8ubuntu1'. > cdrecord: Warning: using inofficial version of libscg (ubuntu-0.8ubuntu1 > '@(#)scsitransp.c 1.91 04/06/17 Copyright 1988,1995,2000-2004 J. > Schilling'). > Device type : Removable CD-ROM > Version : 0 > Response Format: 2 > Capabilities : > Vendor_info : '_NEC ' > Identifikation : 'DVD+-RW ND-6650A' > Revision : '102C' > Device seems to be: Generic mmc2 DVD-R/DVD-RW. > cdrecord: This version of cdrecord does not include DVD-R/DVD-RW support > code. > cdrecord: See /usr/share/doc/cdrecord/README.DVD.Debian for details on > DVD support. > Using generic SCSI-3/mmc CD-R/CD-RW driver (mmc_cdr). > Driver flags : MMC-3 SWABAUDIO BURNFREE > Supported modes: TAO PACKET SAO SAO/R96R RAW/R96R > Error: Cannot gain SYS_RAWIO capability.Is cdrecord installed SUID root? > : Operation not permitted > Starting to write CD/DVD at speed 24 in real TAO mode for single session. > Last chance to quit, starting real write 0 seconds. Operation starts. > cdrecord: Success. write_g1: scsi sendcmd: no error > CDB: 2A 00 00 00 71 D4 00 00 1F 00 > status: 0x2 (CHECK CONDITION) > Sense Bytes: 70 00 05 00 00 00 00 0A 00 00 00 00 21 02 00 00 > Sense Key: 0x5 Illegal Request, Segment 0 > Sense Code: 0x21 Qual 0x02 (invalid address for write) Fru 0x0 > Sense flags: Blk 0 (not valid) > resid: 63488 > cmd finished after 0.001s timeout 40s > write track data: error after 59678720 bytes > cdrecord: The current problem looks like a buffer underrun. > cdrecord: Try to use 'driveropts=burnfree'. > cdrecord: Make sure that you are root, enable DMA and check your HW/OS > set up. > >
Te está diciendo que pruebes esta opción: - Try to use 'driveropts=burnfree' Mira también si tienes el dma activado: - enable DMA and check your HW/OS set up Para saberlo como root haz: $ hdparm -i /dev/hdc Ejecuta el comando como root: - Make sure that you are root Un saludo Gerardo -- To UNSUBSCRIBE, email to [EMAIL PROTECTED] with a subject of "unsubscribe". Trouble? Contact [EMAIL PROTECTED]
