Tengo una Acer TravelMate 3210WXCi que viene con una pantalla panorámica de
1024x800 pero con xorg sólo la he podido configurar hasta 1024x786, existe
alguna forma de forzarlo, en el W$ que ella trae si toma la configuración.
$ lspci
0000:00:02.0 VGA compatible controller: Intel Corp. Mobile Graphics Controller
(rev 04)
0000:00:02.1 Display controller: Intel Corp. Mobile Graphics Controller (rev
04)
Kernel 2.6.15.2
Parte del Log del XOrg
-----------------------------------
(==) ServerLayout "Default Layout"
(**) |-->Screen "Default Screen" (0)
(**) | |-->Monitor "Monitor genrico"
(**) | |-->Device "Intel Corporation Intel Default Card"
(**) |-->Input Device "Generic Keyboard"
(**) |-->Input Device "Configured Mouse"
(**) |-->Input Device "Synaptics Touchpad"
(II) Module ABI versions:
X.Org ANSI C Emulation: 0.2
X.Org Video Driver: 0.7
X.Org XInput driver : 0.4
X.Org Server Extension : 0.2
X.Org Font Renderer : 0.4
(II) Module i810: vendor="X.Org Foundation"
compiled for 6.8.2, module version = 1.4.0
Module class: X.Org Video Driver
ABI class: X.Org Video Driver, version 0.7
(II) I810: Driver for Intel Integrated Graphics Chipsets: i810, i810-dc100,
i810e, i815, i830M, 845G, 852GM/855GM, 865G, 915G, E7221 (i915),
915GM, 945G
(II) Primary Device is: PCI 00:02:0
(WW) I810: No matching Device section for instance (BusID PCI:0:2:1) found
(--) Chipset 915GM found
(II) LoadModule: "int10"
(II) Reloading /usr/X11R6/lib/modules/linux/libint10.a
(II) I810(0): initializing int10
(WW) I810(0): Bad V_BIOS checksum
(II) I810(0): Primary V_BIOS segment is: 0xc000
(II) I810(0): VESA BIOS detected
(II) I810(0): VESA VBE Version 3.0
(II) I810(0): VESA VBE Total Mem: 7872 kB
(II) I810(0): VESA VBE OEM: Intel(r)915GM/910ML/915MS Graphics Chip
Accelerated
VGA BIOS
(II) I810(0): VESA VBE OEM Software Rev: 1.0
(II) I810(0): VESA VBE OEM Vendor: Intel Corporation
(II) I810(0): VESA VBE OEM Product: Intel(r)915GM/910ML/915MS Graphics
Controller
(II) I810(0): VESA VBE OEM Product Rev: Hardware Version 0.0
(II) I810(0): Integrated Graphics Chipset: Intel(R) 915GM
(--) I810(0): Chipset: "915GM"
(--) I810(0): Linear framebuffer at 0xA0000000
(--) I810(0): IO registers at addr 0xD0000000
(II) I810(0): 2 display pipes available.
(II) I810(0): detected 7932 kB stolen memory.
(II) I810(0): I830CheckAvailableMemory: 441340 kB available
(II) I810(0): Monitoring connected displays enabled
(II) I810(0): Will attempt to tell the BIOS that there is 12288 kB VideoRAM
(WW) I810(0): Bad V_BIOS checksum
(II) I810(0): Primary V_BIOS segment is: 0xc000
(II) I810(0): VESA BIOS detected
(II) I810(0): VESA VBE Version 3.0
(II) I810(0): VESA VBE Total Mem: 12288 kB
(II) I810(0): VESA VBE OEM: Intel(r)915GM/910ML/915MS Graphics Chip
Accelerated
VGA BIOS
(II) I810(0): VESA VBE OEM Software Rev: 1.0
(II) I810(0): VESA VBE OEM Vendor: Intel Corporation
(II) I810(0): VESA VBE OEM Product: Intel(r)915GM/910ML/915MS Graphics
Controller
(II) I810(0): VESA VBE OEM Product Rev: Hardware Version 0.0
(II) I810(0): BIOS now sees 12288 kB VideoRAM
(--) I810(0): Pre-allocated VideoRAM: 7932 kByte
(==) I810(0): VideoRAM: 65536 kByte
(==) I810(0): video overlay key set to 0x101fe
(**) I810(0): page flipping disabled
(==) I810(0): Using gamma correction (1.0, 1.0, 1.0)
(II) I810(0): BIOS Build: 1219
(II) I810(0): Using new Pipe switch code
(II) I810(0): Display Info: LFP (local flat panel): attached: TRUE, present:
TRUE, size: (1280,800)
(II) I810(0): Size of device LFP (local flat panel) is 1280 x 800
(II) I810(0): No active displays on Pipe A.
(II) I810(0): Currently active displays on Pipe B:
(II) I810(0): LFP (local flat panel)
(II) I810(0): Lowest common panel size for pipe B is 1280 x 800
(==) I810(0): Display is using Pipe B
(--) I810(0): Maximum frambuffer space: 65368 kByte
(II) I810(0): VESA VBE PanelID read successfully
(II) I810(0): PanelID returned panel resolution : 1280x800
(--) I810(0): Maximum space available for video modes: 12288 kByte
Mode: 30 (640x480)
Mode: 32 (800x600)
Mode: 34 (1024x768)
Mode: 38 (0x0)
Mode: 3a (0x0)
Mode: 3c (0x0)
Mode: 41 (640x480)
Mode: 43 (800x600)
Mode: 45 (1024x768)
Mode: 49 (0x0)
Mode: 4b (0x0)
Mode: 4d (0x0)
*Mode: 50 (640x480)
*Mode: 52 (800x600)
*Mode: 54 (1024x768)
.....
(WW) I810(0): config file hsync range 45.7143-50.5263kHz not within DDC hsync
ranges.
(II) I810(0): Monitor genérico: Using hsync range of 45.71-50.53 kHz
(II) I810(0): Monitor genérico: Using vrefresh value of 60.00 Hz
(II) I810(0): Not using mode "1024x800" (no mode of this name)
(II) I810(0): Not using mode "800x600" (no mode of this name)
(--) I810(0): Virtual size is 1024x768 (pitch 1024)
(**) I810(0): *Built-in mode "1024x768"
(--) I810(0): Display dimensions: (300, 190) mm
(--) I810(0): DPI set to (86, 102)
Gracias por cualquier ayuda
