On Tue, 2006-03-28 at 12:06 +0200, Sergio Villalba wrote: > Gracias por vuestras respuestas. >
[..] > al final lo he montado con ndiswrapper: > ndiswrapper -l > Installed ndis drivers: > bcmwl5 driver present, hardware present > > wlan0 IEEE 802.11g ESSID:off/any > Mode:Managed Frequency:2.462 GHz Access Point: 00:00:00:00:00:00 > Bit Rate:54 Mb/s Tx-Power:16 dBm > RTS thr:2347 B Fragment thr:2346 B > Encryption key:off > Power Management:off > Link Quality:100/100 Signal level:-10 dBm Noise level:-256 dBm > Rx invalid nwid:0 Rx invalid crypt:0 Rx invalid frag:0 > Tx excessive retries:0 Invalid misc:113690 Missed beacon:0 > > iwlist wlan0 scan > Cell 01 - > Address: 00:14:BF:72:FD:28 > ESSID:"wifi" > Protocol:IEEE 802.11b > Mode:Managed > Frequency:2.462 GHz (Channel 11) > Quality:0/100 Signal level:-43 dBm Noise level:-256 dBm > Encryption key:on > Bit Rate:1 Mb/s > Bit Rate:2 Mb/s > Bit Rate:5.5 Mb/s > Bit Rate:11 Mb/s > Bit Rate:18 Mb/s > Bit Rate:24 Mb/s > Bit Rate:36 Mb/s > Bit Rate:54 Mb/s > Bit Rate:6 Mb/s > Bit Rate:9 Mb/s > Bit Rate:12 Mb/s > Bit Rate:48 Mb/s > Extra:bcn_int=100 > Extra:atim=0 > wpa_ie=dd180050f20101000050f20201000050f20201000050f2010000 > > En cual fichero tengo que configurar todo esto? > En /etc/network/interfaces deberias tener algo mas o menos asi: auto wlan0 iface wlan0 inet static address 192.168.1.2 netmask 255.255.255.0 network 192.168.1.0 broadcast 192.168.1.255 gateway 192.168.1.1 wireless-essid wifi wireless-mode Managed # En caso de requerir encriptacion # wireless-keymode restricted # wireless-key1 XXXXXXXXXX # wireless-defaultkey 1 > Gracias por todo. > Un saludo. > S.V. > > > > -- Guillermo Salas M. Telconet S.A. Manta Calle 15 y Av. 24 Esq. Phone : 593 5 262 8071 Mobile: 593 9 985 5138 SIP : [EMAIL PROTECTED] e-mail: [EMAIL PROTECTED] www : http://www.telconet.net http://www.telcocarrier.net Linux User: 255902 Soporte en Linea en http://www.manta.telconet.net Please avoid sending me Word or PowerPoint attachments. See http://www.fsf.org/philosophy/no-word-attachments.html -- To UNSUBSCRIBE, email to [EMAIL PROTECTED] with a subject of "unsubscribe". Trouble? Contact [EMAIL PROTECTED]
