Hola a todos, Después de mirarmelo remirarmelo y volver a remirarmelo, no tengo otra alternativa que recurrir a vosotros para ver si me podeis echar un guante...
Resulta que estoy monitorizando mediante MRTG el router un 3com 11g, el router tiene soporte snmp y lo he activado. el problema es que me duplica la velocidad de bajada de la adsl. osea si bajo a 200KB pues en la gráfica me salen 400KB. en cambio en el táfico Out me muestra datos correctos... La interface que monitorizo del router es la 4, ATM1 pone en el fichero .cfg os dejo un poco del fichero: # Created by # /usr/bin/cfgmaker --output=/etc/WAN.cfg --global 'workdir: /var/www/mrtg' --global 'options[_]:growright,bits' [EMAIL PROTECTED] ### Global Config Options # for UNIX # WorkDir: /home/http/mrtg # for Debian WorkDir: /var/www/mrtg # or for NT # WorkDir: c:\mrtgdata ### Global Defaults # to get bits instead of bytes and graphs growing to the right # Options[_]: growright, bits EnableIPv6: no workdir: /var/www/mrtg options[_]:growright,bits ###################################################################### # System: Broadband Residential Gateway # Description: Broadband Residential Gateway # Contact: [EMAIL PROTECTED] # Location: Taiwan ###################################################################### ### Interface 1 >> Descr: 'LOCAL_LOOPBACK' | Name: '' | Ip: '127.0.0.1' | Eth: '00-00-00-00-00-00' ### La uno esta comentada ya que es loopback ### Interface 2 >> Descr: 'LAN' | Name: '' | Ip: '192.168.1.1' | Eth: '00-14-7c-b0-6c-00' ### Target[192.168.1.1_2]: 2:[EMAIL PROTECTED]: SetEnv[192.168.1.1_2]: MRTG_INT_IP="192.168.1.1" MRTG_INT_DESCR="LAN" MaxBytes[192.168.1.1_2]: 12500000 Title[192.168.1.1_2]: Traffic Analysis for 2 -- Broadband Residential Gateway PageTop[192.168.1.1_2]: <H1>Traffic Analysis for 2 -- Broadband Residential Gateway</H1> <TABLE> <TR><TD>System:</TD> <TD>Broadband Residential Gateway in Taiwan</TD></TR> <TR><TD>Maintainer:</TD> <TD>[EMAIL PROTECTED]</TD></TR> <TR><TD>Description:</TD><TD>LAN </TD></TR> <TR><TD>ifType:</TD> <TD>ethernetCsmacd (6)</TD></TR> <TR><TD>ifName:</TD> <TD></TD></TR> <TR><TD>Max Speed:</TD> <TD>100.0 Mbits/s</TD></TR> <TR><TD>Ip:</TD> <TD>192.168.1.1 (.)</TD></TR> </TABLE> esta la dejo sin comentar para monitorizar la red ### Interface 3 >> Descr: 'WLAN' | Name: '' | Ip: '' | Eth: '00-14-7c-b0-6c-02' ### Target[192.168.1.1_3]: 3:[EMAIL PROTECTED]: SetEnv[192.168.1.1_3]: MRTG_INT_IP="" MRTG_INT_DESCR="WLAN" MaxBytes[192.168.1.1_3]: 1250000 Title[192.168.1.1_3]: Traffic Analysis for 3 -- Broadband Residential Gateway PageTop[192.168.1.1_3]: <H1>Traffic Analysis for 3 -- Broadband Residential Gateway</H1> <TABLE> <TR><TD>System:</TD> <TD>Broadband Residential Gateway in Taiwan</TD></TR> <TR><TD>Maintainer:</TD> <TD>[EMAIL PROTECTED]</TD></TR> <TR><TD>Description:</TD><TD>WLAN </TD></TR> <TR><TD>ifType:</TD> <TD>ethernetCsmacd (6)</TD></TR> <TR><TD>ifName:</TD> <TD></TD></TR> <TR><TD>Max Speed:</TD> <TD>10.0 Mbits/s</TD></TR> </TABLE> la wlan la dejo sin comentar, no me he fijado si tiene el mismo problema. ### Interface 4 >> Descr: 'ATM1' | Name: '' | Ip: '' | Eth: '00-14-7c-b0-6c-01' ### Target[192.168.1.1_4]: 4:[EMAIL PROTECTED]: SetEnv[192.168.1.1_4]: MRTG_INT_IP="" MRTG_INT_DESCR="ATM1" MaxBytes[192.168.1.1_4]: 1250000 Title[192.168.1.1_4]: Traffic Analysis for 4 -- Broadband Residential Gateway PageTop[192.168.1.1_4]: <H1>Traffic Analysis for 4 -- Broadband Residential Gateway</H1> <TABLE> <TR><TD>System:</TD> <TD>Broadband Residential Gateway in Taiwan</TD></TR> <TR><TD>Maintainer:</TD> <TD>[EMAIL PROTECTED]</TD></TR> <TR><TD>Description:</TD><TD>ATM1 </TD></TR> <TR><TD>ifType:</TD> <TD>ethernetCsmacd (6)</TD></TR> <TR><TD>ifName:</TD> <TD></TD></TR> <TR><TD>Max Speed:</TD> <TD>10.0 Mbits/s</TD></TR> </TABLE> ### Interface 12 >> Descr: 'PPPoE1' | Name: '' | Ip: '' | Eth: '' ### comentada ya que no tiene trafico alguno ?¿ Esto fue lo que me soltó cfgmaker cuando cree el fichero: --base: Get Device Info on [EMAIL PROTECTED]: --base: Vendor Id: --base: Populating confcache --snpo: Skipping ifName scanning because [EMAIL PROTECTED]: does not seem to support it --snpo: confcache [EMAIL PROTECTED]: Descr LOCAL_LOOPBACK --> 1 --snpo: confcache [EMAIL PROTECTED]: Descr LAN --> 2 --snpo: confcache [EMAIL PROTECTED]: Descr WLAN --> 3 --snpo: confcache [EMAIL PROTECTED]: Descr ATM1 --> 4 --snpo: confcache [EMAIL PROTECTED]: Descr PPPoE1 --> 12 --snpo: confcache [EMAIL PROTECTED]: Type 24 --> 1 --snpo: confcache [EMAIL PROTECTED]: Type 6 --> 2 --snpo: confcache [EMAIL PROTECTED]: Type 6 --> 3 (duplicate) --snpo: confcache [EMAIL PROTECTED]: Type 6 --> 4 (duplicate) --snpo: confcache [EMAIL PROTECTED]: Type 0 --> 12 --snpo: confcache [EMAIL PROTECTED]: Ip 127.0.0.1 --> 1 --snpo: confcache [EMAIL PROTECTED]: Ip 192.168.1.1 --> 2 --snpo: confcache [EMAIL PROTECTED]: Eth 00-00-00-00-00-00 --> 1 --snpo: confcache [EMAIL PROTECTED]: Eth 00-14-7c-b0-6c-00 --> 2 --snpo: confcache [EMAIL PROTECTED]: Eth 00-14-7c-b0-6c-02 --> 3 --snpo: confcache [EMAIL PROTECTED]: Eth 00-14-7c-b0-6c-01 --> 4 --snpo: confcache [EMAIL PROTECTED]: Eth --> 12 --base: Get Interface Info --base: Walking ifIndex --base: Walking ifType --base: Walking ifAdminStatus --base: Walking ifOperStatus --base: Walking ifSpeed --base: Writing /etc/WAN.cfg Alguien sabe que esta pasando? muchas gracias a todos por leeros este toston. Saludos- David.
