-----BEGIN PGP SIGNED MESSAGE----- Hash: SHA1 Que tal,
Miguel J. Jiménez escribió: > Hola, hasta ayer utilizaba el kernel 2.6.25.6 y el llavero USB de 2GiB que > tenía se montaba perfectamente como "GENERIC USB" (se trata de un minillavero > con una tarjeta microsd en su interior), pero ayer instalé el nuevo kernel > (2.6.26) y no lo monta (ni hace nada) aunque me lo reconoce cuando lo > enchufo. Tengo otro llavero de la misma capacidad que NO es "GENERIC USB" y > ese lo monta de fábula. El syslog me da la siguiente información al montar el > llavero.... Dice algo de "capacidad excedida..." que NPI a qué se debe. > ¿Alguien tiene idea del por qué? ¿Se trata de un error introducido en el > 2.6.26? Cualquier ayuda apreciada, gracias... > > Conchale, intenta revisando los módulos de usb para montaje de almacenamiento masivo o algo así, también los permisos y privilegios sobre los dispositivos plugdev o hotplug De los módulos mas comunes pmount y libpmount. Puede ser que para éste kernel nuevo necesites otras versiones de los módulos. > > Jul 30 09:34:03 pitufina kernel: usb usb1: usb resume > Jul 30 09:34:03 pitufina kernel: ehci_hcd 0000:00:1d.7: resume root hub > Jul 30 09:34:03 pitufina kernel: hub 1-0:1.0: hub_resume > Jul 30 09:34:03 pitufina kernel: ehci_hcd 0000:00:1d.7: GetStatus port 8 > status 001803 POWER sig=j CSC CONNECT > Jul 30 09:34:03 pitufina kernel: hub 1-0:1.0: state 7 ports 8 chg 0000 evt > 0000 > Jul 30 09:34:03 pitufina kernel: ehci_hcd 0000:00:1d.7: GetStatus port 8 > status 001803 POWER sig=j CSC CONNECT > Jul 30 09:34:03 pitufina kernel: hub 1-0:1.0: port 8, status 0501, change > 0001, 480 Mb/s > Jul 30 09:34:03 pitufina kernel: hub 1-0:1.0: debounce: port 8: total 100ms > stable 100ms status 0x501 > Jul 30 09:34:03 pitufina kernel: ehci_hcd 0000:00:1d.7: port 8 high speed > Jul 30 09:34:03 pitufina kernel: ehci_hcd 0000:00:1d.7: GetStatus port 8 > status 001005 POWER sig=se0 PE CONNECT > Jul 30 09:34:03 pitufina kernel: usb 1-8: new high speed USB device using > ehci_hcd and address 7 > Jul 30 09:34:03 pitufina kernel: ehci_hcd 0000:00:1d.7: port 8 high speed > Jul 30 09:34:03 pitufina kernel: ehci_hcd 0000:00:1d.7: GetStatus port 8 > status 001005 POWER sig=se0 PE CONNECT > Jul 30 09:34:03 pitufina kernel: usb 1-8: default language 0x0409 > Jul 30 09:34:03 pitufina kernel: usb 1-8: uevent > Jul 30 09:34:03 pitufina kernel: usb 1-8: usb_probe_device > Jul 30 09:34:03 pitufina kernel: usb 1-8: configuration #1 chosen from 1 > choice > Jul 30 09:34:03 pitufina kernel: usb 1-8: adding 1-8:1.0 (config #1, > interface 0) > Jul 30 09:34:03 pitufina kernel: usb 1-8:1.0: uevent > Jul 30 09:34:03 pitufina kernel: usb-storage 1-8:1.0: usb_probe_interface > Jul 30 09:34:03 pitufina kernel: usb-storage 1-8:1.0: usb_probe_interface - > got id > Jul 30 09:34:03 pitufina kernel: scsi7 : SCSI emulation for USB Mass Storage > devices > Jul 30 09:34:03 pitufina kernel: usb-storage: device found at 7 > Jul 30 09:34:03 pitufina kernel: usb-storage: waiting for device to settle > before scanning > Jul 30 09:34:03 pitufina kernel: drivers/usb/core/inode.c: creating file '007' > Jul 30 09:34:03 pitufina kernel: usb 1-8: New USB device found, > idVendor=090c, idProduct=6000 > Jul 30 09:34:03 pitufina kernel: usb 1-8: New USB device strings: Mfr=1, > Product=2, SerialNumber=3 > Jul 30 09:34:03 pitufina kernel: usb 1-8: Product: USB2.0 Card Reader > Jul 30 09:34:03 pitufina kernel: usb 1-8: Manufacturer: Generic , . > Jul 30 09:34:03 pitufina kernel: usb 1-8: SerialNumber: 12345678901234567890 > Jul 30 09:34:03 pitufina NetworkManager: <debug> [1217403243.773592] > nm_hal_device_added(): New device added (hal udi is > '/org/freedesktop/Hal/devices/usb_device_90c_6000_12345678901234567890'). > Jul 30 09:34:03 pitufina NetworkManager: <debug> [1217403243.825277] > nm_hal_device_added(): New device added (hal udi is > '/org/freedesktop/Hal/devices/usb_device_90c_6000_12345678901234567890_if0'). > Jul 30 09:34:03 pitufina NetworkManager: <debug> [1217403243.840448] > nm_hal_device_added(): New device added (hal udi is > '/org/freedesktop/Hal/devices/usb_device_90c_6000_12345678901234567890_if0_scsi_host'). > > Jul 30 09:34:08 pitufina kernel: usb-storage: device scan complete > Jul 30 09:34:08 pitufina kernel: scsi 7:0:0:0: Direct-Access Generic > 6000 PQ: 0 ANSI: 0 CCS > Jul 30 09:34:08 pitufina kernel: sd 7:0:0:0: [sdb] Sector size 0 reported, > assuming 512. > Jul 30 09:34:08 pitufina kernel: sd 7:0:0:0: [sdb] 1 512-byte hardware > sectors (0 MB) > Jul 30 09:34:08 pitufina kernel: sd 7:0:0:0: [sdb] Write Protect is off > Jul 30 09:34:08 pitufina kernel: sd 7:0:0:0: [sdb] Mode Sense: 4b 00 00 08 > Jul 30 09:34:08 pitufina kernel: sd 7:0:0:0: [sdb] Assuming drive cache: > write through > Jul 30 09:34:08 pitufina kernel: sd 7:0:0:0: [sdb] Sector size 0 reported, > assuming 512. > Jul 30 09:34:08 pitufina kernel: sd 7:0:0:0: [sdb] 1 512-byte hardware > sectors (0 MB) > Jul 30 09:34:08 pitufina kernel: sd 7:0:0:0: [sdb] Write Protect is off > Jul 30 09:34:08 pitufina kernel: sd 7:0:0:0: [sdb] Mode Sense: 4b 00 00 08 > Jul 30 09:34:08 pitufina kernel: sd 7:0:0:0: [sdb] Assuming drive cache: > write through > Jul 30 09:34:08 pitufina kernel: sdb: sdb1 > Jul 30 09:34:08 pitufina kernel: sdb: p1 exceeds device capacity > Jul 30 09:34:08 pitufina kernel: sd 7:0:0:0: [sdb] Attached SCSI removable > disk > Jul 30 09:34:08 pitufina kernel: sd 7:0:0:0: Attached scsi generic sg2 type 0 > Jul 30 09:34:08 pitufina NetworkManager: <debug> [1217403248.787870] > nm_hal_device_added(): New device added (hal udi is > '/org/freedesktop/Hal/devices/usb_device_90c_6000_12345678901234567890_if0_scsi_host_0'). > > Jul 30 09:34:08 pitufina NetworkManager: <debug> [1217403248.791592] > nm_hal_device_added(): New device added (hal udi is > '/org/freedesktop/Hal/devices/usb_device_90c_6000_12345678901234567890_if0_scsi_host_0_scsi_device_lun0'). > > Jul 30 09:34:08 pitufina NetworkManager: <debug> [1217403248.806831] > nm_hal_device_added(): New device added (hal udi is > '/org/freedesktop/Hal/devices/usb_device_90c_6000_12345678901234567890_if0_scsi_host_0_scsi_device_lun0_scsi_generic'). > > Jul 30 09:34:08 pitufina kernel: attempt to access beyond end of device > Jul 30 09:34:08 pitufina kernel: sdb: rw=0, want=3932032, limit=1 > Jul 30 09:34:08 pitufina kernel: __ratelimit: 166 messages suppressed > Jul 30 09:34:08 pitufina kernel: Buffer I/O error on device sdb1, logical > block 3931776 > Jul 30 09:34:08 pitufina kernel: attempt to access beyond end of device > Jul 30 09:34:08 pitufina kernel: sdb: rw=0, want=3932033, limit=1 > Jul 30 09:34:08 pitufina kernel: Buffer I/O error on device sdb1, logical > block 3931777 > Jul 30 09:34:08 pitufina kernel: attempt to access beyond end of device > Jul 30 09:34:08 pitufina kernel: sdb: rw=0, want=3932034, limit=1 > Jul 30 09:34:08 pitufina kernel: Buffer I/O error on device sdb1, logical > block 3931778 > Jul 30 09:34:08 pitufina kernel: attempt to access beyond end of device > Jul 30 09:34:08 pitufina kernel: sdb: rw=0, want=3932035, limit=1 > Jul 30 09:34:08 pitufina kernel: Buffer I/O error on device sdb1, logical > block 3931779 > Jul 30 09:34:08 pitufina kernel: attempt to access beyond end of device > Jul 30 09:34:08 pitufina kernel: sdb: rw=0, want=3932036, limit=1 > etc,etc,etc... > > > --- > .---------------------------------------------------------. > | Miguel J. Jiménez | > | Sector Público, ISOTROL S.A. | > | [EMAIL PROTECTED] | > :---------------------------------------------------------: > | KeyID 0xFFE63EC6 hkp://pgp.rediris.es:11371 | > :---------------------------------------------------------: > | Edificio BLUENET, Avda. Isaac Newton nº3, 4ª planta. | > | Parque Tecnológico Cartuja '93, 41092 Sevilla (ESP). | > | Tlfn: +34 955 036 800 (ext.1805) - Fax: +34 955 036 849 | > | http://www.isotrol.com | > :---------------------------------------------------------: > | UTM ED-50 X:765205.09 Y:4144614.91 Huso: 29 | > :---------------------------------------------------------: > | "The problem with acting normal is that normal people | > | get into stupid situations." | > | Dexter Morgan, Dexter (1x05) | > '---------------------------------------------------------' Saludos... - -- Félix E. Urbina C. Ciudad Guayana, Venezuela -----BEGIN PGP SIGNATURE----- Version: GnuPG v1.4.6 (GNU/Linux) Comment: Using GnuPG with Mozilla - http://enigmail.mozdev.org iD8DBQFImSiecUFpsg3GcjgRAsqRAJ979+x7qV3Cq1ejQnr7+Nz9gr83WgCgwh+j I0WbGVCsd5RTn91WtBS8ZGY= =4vIy -----END PGP SIGNATURE----- -- To UNSUBSCRIBE, email to [EMAIL PROTECTED] with a subject of "unsubscribe". Trouble? Contact [EMAIL PROTECTED]
