Hola amigos, tengo algun problema extraño al intentar conectarme con un modem 3g ZTE MF626, de la operadora Claro de Paraguay.
He conseguido que me reconozca el modem: ls /dev/ttyU* /dev/ttyUSB0 Al darle dmesg veo: [13529.798900] usb 5-2: USB disconnect, address 6 [13529.799055] generic ttyUSB0: generic converter now disconnected from ttyUSB0 [13529.799068] usbserial_generic 5-2:1.0: device disconnected [13677.660014] usb 5-2: new high speed USB device using ehci_hcd and address 7 [13677.805063] usb 5-2: configuration #1 chosen from 1 choice [13677.806557] usb-storage: device ignored [13677.806648] usbserial_generic 5-2:1.0: generic converter detected [13677.806700] usb 5-2: generic converter now attached to ttyUSB0 [13677.806802] usb 5-2: New USB device found, idVendor=19d2, idProduct=2000 [13677.806805] usb 5-2: New USB device strings: Mfr=2, Product=1, SerialNumber=0 [13677.806807] usb 5-2: Product: ZTE CDMA Technologies MSM [13677.806809] usb 5-2: Manufacturer: ZTE, Incorporated Pero al darle: # wvdialconf Editing `/etc/wvdial.conf'. Scanning your serial ports for a modem. ttyS0<*1>: ATQ0 V1 E1 -- failed with 2400 baud, next try: 9600 baud ttyS0<*1>: ATQ0 V1 E1 -- failed with 9600 baud, next try: 115200 baud ttyS0<*1>: ATQ0 V1 E1 -- and failed too at 115200, giving up. Modem Port Scan<*1>: S1 S2 S3 WvModem<*1>: Cannot get information for serial port. ttyUSB0<*1>: ATQ0 V1 E1 -- failed with 2400 baud, next try: 9600 baud ttyUSB0<*1>: ATQ0 V1 E1 -- failed with 9600 baud, next try: 9600 baud ttyUSB0<*1>: ATQ0 V1 E1 -- and failed too at 115200, giving up. Sorry, no modem was detected! Is it in use by another program? Did you configure it properly with setserial? Please read the FAQ at http://open.nit.ca/wiki/?WvDial If you still have problems, send mail to <[email protected]>. Y ahí ya no se que puedo hacer, mire la ayuda de setserial y no entiendo que puedo configurar con ese programa, y el FAQ de WvDial no lo puedo acceder porque aqui en mi trabajo aparentemente lo tengo filtrado. Luego de conseguir los datos de mi operadora local mi archivo de configuracion del wvdial quedo así: # cat /etc/wvdial.conf [Dialer Defaults] Init1 = ATZ Init2 = ATQ0 V1 E1 S0=0 &C1 &D2 +FCLASS=0 Modem Type = Analog Modem ISDN = 0 Phone = *99# New PPPD = yes Modem = /dev/ttyUSB0 Username = ctigprs Password = ctigprs999 Baud = 460800 Alguna idea, ayuda o algo para seguir mirando? Desde ya muchas gracias y un abrazo para todos. -- §~^Calabaza^~§ from Villa Elisa, Paraguay -- To UNSUBSCRIBE, email to [email protected] with a subject of "unsubscribe". Trouble? Contact [email protected]
