2009/3/20 Alberto Vicat <[email protected]> > Francisco Javier Aravena Jimenez escribió: > > >> Hola a Todos espero que se encuentren muy bien. >> Les comento. >> Tengo un detalle con lenny, el problema radica en que es muy lento para >> escribir, demasiado, esto pasa al grabar un DVD, al Grabar Un Pendrive o al >> copiar al disco desde otra partición. no se por que sera, lo comenze a notar >> al grabar DVD se demora casi una hora, con Brasero. :S , la verdad es que no >> lo habia notado hasta que me puse a grabar DVD, y pasar info a un pendrive. >> Es un Portatil HP Pavilion DV2925LA. >> >> el hdparm tira esto , mas aya no se que deba hacer... >> >> scorpio:/home/faravena# hdparm -I /dev/sda >> >> /dev/sda: >> >> ATA device, with non-removable media >> Model Number: FUJITSU MHZ2250BH G2 Serial >> Number: K617T862DESG Firmware Revision: 8909 Transport: >> Serial, ATA8-AST, SATA 1.0a, SATA II Extensions, SATA Rev 2.5 >> Standards: >> Used: ATA-8-ACS revision 3f >> Supported: 8 7 6 5 >> Configuration: >> Logical max current >> cylinders 16383 16383 >> heads 16 16 >> sectors/track 63 63 >> -- >> CHS current addressable sectors: 16514064 >> LBA user addressable sectors: 268435455 >> LBA48 user addressable sectors: 488397168 >> device size with M = 1024*1024: 238475 MBytes >> device size with M = 1000*1000: 250059 MBytes (250 GB) >> Capabilities: >> LBA, IORDY(can be disabled) >> Queue depth: 32 >> Standby timer values: spec'd by Vendor, no device specific minimum >> R/W multiple sector transfer: Max = 16 Current = 16 >> Advanced power management level: 128 >> DMA: mdma0 mdma1 mdma2 udma0 udma1 udma2 udma3 udma4 *udma5 >> Cycle time: min=120ns recommended=120ns >> PIO: pio0 pio1 pio2 pio3 pio4 >> Cycle time: no flow control=120ns IORDY flow control=120ns >> Commands/features: >> Enabled Supported: >> * SMART feature set >> Security Mode feature set >> * Power Management feature set >> * Write cache >> * Look-ahead >> * WRITE_BUFFER command >> * READ_BUFFER command >> * NOP cmd >> * DOWNLOAD_MICROCODE >> * Advanced Power Management feature set >> * 48-bit Address feature set >> * Device Configuration Overlay feature set >> * Mandatory FLUSH_CACHE >> * FLUSH_CACHE_EXT >> * SMART error logging >> * SMART self-test >> * General Purpose Logging feature set >> * 64-bit World wide name >> * IDLE_IMMEDIATE with UNLOAD >> * WRITE_UNCORRECTABLE_EXT command >> * {READ,WRITE}_DMA_EXT_GPL commands >> * Segmented DOWNLOAD_MICROCODE >> * SATA-I signaling speed (1.5Gb/s) >> * SATA-II signaling speed (3.0Gb/s) >> * Native Command Queueing (NCQ) >> * Phy event counters >> * unknown 76[11] >> DMA Setup Auto-Activate optimization >> Device-initiated interface power management >> * Software settings preservation >> * SMART Command Transport (SCT) feature set >> * SCT Long Sector Access (AC1) >> * SCT LBA Segment Access (AC2) >> * SCT Error Recovery Control (AC3) >> * SCT Features Control (AC4) >> * SCT Data Tables (AC5) >> Security: >> Master password revision code = 65534 >> supported >> not enabled >> not locked >> frozen >> not expired: security count >> supported: enhanced erase >> 164min for SECURITY ERASE UNIT. 164min for ENHANCED SECURITY ERASE >> UNIT. >> Logical Unit WWN Device Identifier: 5000e04226301d >> NAA : 5 >> IEEE OUI : e >> Unique ID : 04226301d >> Checksum: correct >> >> despues ejecuto para medir la copia >> >> scorpio:/home/faravena# hdparm -Tt /dev/sda >> >> /dev/sda: >> Timing cached reads: 2014 MB in 2.00 seconds = 1006.92 MB/sec >> Timing buffered disk reads: 162 MB in 3.00 seconds = 53.92 MB/sec >> >> y de hay no se que mas tengo que hacer, no se tampoco si los datos son >> correctos y si esto tiene o no que ver con la grabacion de DVD :S aver si me >> echan una mano. >> > > ¿Has probado hacerlo con K3b? Para comparar digo. > > Saludos > > > > -- > To UNSUBSCRIBE, email to [email protected] > with a subject of "unsubscribe". Trouble? Contact > [email protected] > > mmm la verdad que no , llegando a casa lo veo aunque si pide muchas dependencias de KDE lo dejo.. no quieromachar lenny con KDE
-- -- atte. Francisco Aravena | Este mensaje no contiene virus ya que fue escrito en una PC con | sistema | LINUX. | | | This message doesn't contain viruses, because it has been created with | Linux. | |_______________________________________________________________________
