On Viernes 20 enero 2012 15:46:56 Camaleón escribió: > El Thu, 19 Jan 2012 23:39:35 -0200, [email protected] escribió: > > Estoy tratando de hacer funcionar una placa PCI Netgear WPN511con > > chipset atheros AR5212/AR5213 en debian sid con kernel 3.2.0-1-686-pae > > > > #lspci -nn > > 07:00.0 Ethernet controller [0200]: Atheros Communications Inc. > > AR5212/AR5213 Wireless Network Adapter [168c:0013] (rev 01) > > > > #lsmod | grep ath > > ath5k 115240 0 > > ath 17114 1 ath5k mac80211 171390 1 > > ath5k cfg80211 117454 5 ath5k,ath,mac80211,ipw2200,libipw > > > > La placa es reconocida normalmente,el modulo ath5k se carga en > > automatico, el asunto es que no se asocia a ningun AP,escanea las redes > > dando la siguiente salida : > > #iwlist wlan0 scan > > (...) > > Un par de sugerencias: > > 1/ Configura el código del país donde operas desde el archivo "/etc/ > default/crda" (si no tienes este archivo instala el paquete "crda"). >
> 2/ Si usas NM, configura la interfaz como siempre, ponle todos los datos > para asociarse con el AP y cuando esté el NM escaneando ejecuta "tail -f / > var/log/syslog". > > Saludos, bueno...he seguido las sugerencias dadas por Camaleón y en un primer momento no habia señales de cambio. haciendo un tail -f... no reportaba nada y buscando buscando enconte esta linea haciendo un: #dmesg | grep wlan ADDRCONF(NETDEV_UP): wlan0: link is not ready en un segundo de meditacion ( o impotencia) desconecto la tarjeta y la vuelvo a insertar en su ranura mientras ejecutaba un tail -f.... previamente habiendo habilitado el mode managed en /etc/network/interfaces ......... kernel: [ 574.428191] pcmcia_socket pcmcia_socket0: pccard: CardBus card inserted into slot 0 Jan 21 00:55:12 dhclient: can't create /var/lib/dhcp3/dhclient.wlan0.leases: No such file or directory Jan 21 00:55:12 dhclient: DHCPDISCOVER on wlan0 to 255.255.255.255 port 67 interval 6 Jan 21 00:55:12 kernel: [ 574.428229] pci 0000:07:00.0: [168c:0013] type 0 class 0x000200 Jan 21 00:55:12 kernel: [ 574.428271] pci 0000:07:00.0: reg 10: [mem 0x00000000-0x0000ffff] Jan 21 00:55:12 kernel: [ 574.428436] pci 0000:07:00.0: BAR 0: assigned [mem 0x84000000-0x8400ffff] Jan 21 00:55:12 kernel: [ 574.428451] pci 0000:07:00.0: BAR 0: set to [mem 0x84000000-0x8400ffff] (PCI address [0x84000000-0x8400ffff]) Jan 21 00:55:12 kernel: [ 574.428656] ath5k 0000:07:00.0: enabling device (0000 -> 0002) Jan 21 00:55:12 kernel: [ 574.428673] ath5k 0000:07:00.0: PCI INT A -> GSI 16 (level, low) -> IRQ 16 Jan 21 00:55:12 kernel: [ 574.428776] ath5k 0000:07:00.0: registered as 'phy2' Jan 21 00:55:12 kernel: [ 575.021085] ath: EEPROM regdomain: 0x0 Jan 21 00:55:12 kernel: [ 575.021089] ath: EEPROM indicates default country code should be used Jan 21 00:55:12 kernel: [ 575.021091] ath: doing EEPROM country->regdmn map search Jan 21 00:55:12 kernel: [ 575.021095] ath: country maps to regdmn code: 0x3a Jan 21 00:55:12 kernel: [ 575.021097] ath: Country alpha2 being used: US Jan 21 00:55:12 kernel: [ 575.021099] ath: Regpair used: 0x3a Jan 21 00:55:12 kernel: [ 575.021628] ieee80211 phy2: Selected rate control algorithm 'minstrel_ht' Jan 21 00:55:12 kernel: [ 575.023278] ath5k phy2: Atheros AR2414 chip found (MAC: 0x79, PHY: 0x45) Jan 21 00:55:12 kernel: [ 575.064195] cfg80211: Calling CRDA for country: US Jan 21 00:55:12 kernel: [ 575.074321] cfg80211: Current regulatory domain intersected: Jan 21 00:55:12 kernel: [ 575.074325] cfg80211: (start_freq - end_freq @ bandwidth), (max_antenna_gain, max_eirp) Jan 21 00:55:12 kernel: [ 575.074329] cfg80211: (2402000 KHz - 2472000 KHz @ 40000 KHz), (N/A, 2000 mBm) Jan 21 00:55:12 kernel: [ 575.074333] cfg80211: (5170000 KHz - 5250000 KHz @ 40000 KHz), (300 mBi, 1700 mBm) Jan 21 00:55:12 kernel: [ 575.074336] cfg80211: (5250000 KHz - 5330000 KHz @ 40000 KHz), (300 mBi, 2000 mBm) Jan 21 00:55:12 kernel: [ 575.074340] cfg80211: (5490000 KHz - 5600000 KHz @ 40000 KHz), (300 mBi, 2000 mBm) Jan 21 00:55:12 kernel: [ 575.074344] cfg80211: (5650000 KHz - 5710000 KHz @ 40000 KHz), (300 mBi, 2000 mBm) Jan 21 00:55:12 kernel: [ 575.074347] cfg80211: (5735000 KHz - 5835000 KHz @ 40000 KHz), (300 mBi, 3000 mBm) Jan 21 00:55:12 kernel: [ 575.111708] ADDRCONF(NETDEV_UP): wlan0: link is not ready Jan 21 00:55:13 kernel: [ 575.859663] wlan0: authenticate with 00:14:6c:a9:36:8a (try 1) Jan 21 00:55:13 kernel: [ 575.863921] wlan0: authenticated Jan 21 00:55:13 kernel: [ 575.863964] wlan0: associate with 00:14:6c:a9:36:8a (try 1) Jan 21 00:55:13 kernel: [ 575.871646] wlan0: RX AssocResp from 00:14:6c:a9:36:8a (capab=0x461 status=0 aid=3) Jan 21 00:55:13 kernel: [ 575.871653] wlan0: associated Jan 21 00:55:13 kernel: [ 575.873210] ADDRCONF(NETDEV_CHANGE): wlan0: link becomes ready Jan 21 00:55:15 kernel: [ 578.224195] cfg80211: Calling CRDA to update world regulatory domain Jan 21 00:55:15 kernel: [ 578.235573] cfg80211: World regulatory domain updated: Jan 21 00:55:15 kernel: [ 578.235581] cfg80211: (start_freq - end_freq @ bandwidth), (max_antenna_gain, max_eirp) Jan 21 00:55:15 kernel: [ 578.235590] cfg80211: (2402000 KHz - 2472000 KHz @ 40000 KHz), (300 mBi, 2000 mBm) Jan 21 00:55:15 kernel: [ 578.235599] cfg80211: (2457000 KHz - 2482000 KHz @ 20000 KHz), (300 mBi, 2000 mBm) Jan 21 00:55:15 kernel: [ 578.235606] cfg80211: (2474000 KHz - 2494000 KHz @ 20000 KHz), (300 mBi, 2000 mBm) Jan 21 00:55:15 kernel: [ 578.235614] cfg80211: (5170000 KHz - 5250000 KHz @ 40000 KHz), (300 mBi, 2000 mBm) Jan 21 00:55:15 kernel: [ 578.235622] cfg80211: (5735000 KHz - 5835000 KHz @ 40000 KHz), (300 mBi, 2000 mBm) Jan 21 00:55:16 ntpd[2722]: Listen normally on 6 wlan0 fe80::218:4dff:fe81:9455 UDP 123 Jan 21 00:55:16 ntpd[2722]: peers refreshed ........... y funciona !!!!! saludos. -- _____________________________________________________________________________ Key ID :0x4EFA155F379D2F00 hkp://wwwkeys.eu.pgp.net "Try Linux and your soul will rest in peace" -- To UNSUBSCRIBE, email to [email protected] with a subject of "unsubscribe". Trouble? Contact [email protected] Archive: http://lists.debian.org/[email protected]
