Cristian Mitchell, También suele pasar cosas raras con el sistema de hibernación, ej: Me pasa aveces que cuando vuelvo de una hibernación la pantalla se divide en 3...
Saludos 2014-02-05 Ricardo Zúñiga <ceaerr...@gmail.com>: > Lo malo es que bootlogd esta desactivado por defecto y dmesg no es > especifico. > > > Bueno, Gracias por la ayuda y los comentarios. Estoy conectado a la red > cableada nuevamente. > > Saludos > > > 2014-02-05 Maykel Franco <maykeldeb...@gmail.com>: > > >> >> >> 2014-02-05 Ricardo Zúñiga <ceaerr...@gmail.com>: >> >> Vamos que no se quemó ni nada por el estilo >>> >>> # ifconfig -a >>> eth0 Link encap:Ethernet HWaddr b8:70:f4:27:2b:a9 >>> inet6 addr: fe80::ba70:f4ff:fe27:2ba9/64 Scope:Link >>> UP BROADCAST MULTICAST MTU:1500 Metric:1 >>> RX packets:1488 errors:0 dropped:0 overruns:0 frame:0 >>> TX packets:43 errors:0 dropped:0 overruns:0 carrier:0 >>> collisions:0 txqueuelen:1000 >>> RX bytes:119938 (117.1 KiB) TX bytes:9199 (8.9 KiB) >>> Interrupt:40 Base address:0x6000 >>> >>> lo Link encap:Local Loopback >>> inet addr:127.0.0.1 Mask:255.0.0.0 >>> inet6 addr: ::1/128 Scope:Host >>> UP LOOPBACK RUNNING MTU:16436 Metric:1 >>> RX packets:34 errors:0 dropped:0 overruns:0 frame:0 >>> TX packets:34 errors:0 dropped:0 overruns:0 carrier:0 >>> collisions:0 txqueuelen:0 >>> RX bytes:2348 (2.2 KiB) TX bytes:2348 (2.2 KiB) >>> >>> >>> wlan0 Link encap:Ethernet HWaddr ac:81:12:80:13:82 >>> inet addr:200.0.0.80 Bcast:200.0.0.255 Mask:255.255.255.0 >>> inet6 addr: fe80::ae81:12ff:fe80:1382/64 Scope:Link >>> UP BROADCAST RUNNING MULTICAST MTU:1500 Metric:1 >>> RX packets:151 errors:0 dropped:0 overruns:0 frame:2017 >>> TX packets:100 errors:21 dropped:0 overruns:0 carrier:0 >>> collisions:0 txqueuelen:1000 >>> RX bytes:14144 (13.8 KiB) TX bytes:22554 (22.0 KiB) >>> Interrupt:17 >>> Camaleón no uso windows, solo debian. Desactive y active la red desde la >>> BIOS y nada. >>> >>> Pero..... >>> >>> Elimine "/etc/udev/rules.d/70-persistent-net.rules" y "APAGUE" el >>> notebook, al volver a encenderlo volvio a aparecer, ahora me dice que no >>> esta gestionado, pero ya aparecio (Volvio de sus cortas vacaciones). >>> >>> Anoche estube trabajando hasta tarde y me qede dormido con el encendido >>> en la mañana al levantarme solo cerre la tapa y al llegar a la oficina ya >>> estaba encendido. Quizas sea un tema de "Hibernación" que desactiva las >>> eth0 o entran en conflicto. >>> >>> >>> 2014-02-05 Debian GMail <javier.debian.bb...@gmail.com>: >>> >>> El 05/02/14 10:47, Ricardo Zúñiga escribió: >>>> >>>> Saludos lista, les comento lo que me paso: >>>>> >>>>> Vaya sorpresa me eh dado esta mañana, Desaparecio la interfaz de red >>>>> cableada eth0. >>>>> >>>>> # dmesg | grep -i eth >>>>> [ 18.761560] Bluetooth: BNEP (Ethernet Emulation) ver 1.3 >>>>> >>>>> Quitandole la sentencia -i no arroja resultado, pero con lspci no la >>>>> veo: >>>>> # lspci >>>>> 00:00.0 Host bridge: Intel Corporation Core Processor DRAM Controller >>>>> (rev 02) >>>>> 00:02.0 VGA compatible controller: Intel Corporation Core Processor >>>>> Integrated Graphics Controller (rev 02) >>>>> 00:16.0 Communication controller: Intel Corporation 5 Series/3400 >>>>> Series >>>>> Chipset HECI Controller (rev 06) >>>>> 00:1a.0 USB controller: Intel Corporation 5 Series/3400 Series Chipset >>>>> USB2 Enhanced Host Controller (rev 05) >>>>> 00:1b.0 Audio device: Intel Corporation 5 Series/3400 Series Chipset >>>>> High Definition Audio (rev 05) >>>>> 00:1c.0 PCI bridge: Intel Corporation 5 Series/3400 Series Chipset PCI >>>>> Express Root Port 1 (rev 05) >>>>> 00:1c.1 PCI bridge: Intel Corporation 5 Series/3400 Series Chipset PCI >>>>> Express Root Port 2 (rev 05) >>>>> 00:1c.4 PCI bridge: Intel Corporation 5 Series/3400 Series Chipset PCI >>>>> Express Root Port 5 (rev 05) >>>>> 00:1d.0 USB controller: Intel Corporation 5 Series/3400 Series Chipset >>>>> USB2 Enhanced Host Controller (rev 05) >>>>> 00:1e.0 PCI bridge: Intel Corporation 82801 Mobile PCI Bridge (rev a5) >>>>> 00:1f.0 ISA bridge: Intel Corporation Mobile 5 Series Chipset LPC >>>>> Interface Controller (rev 05) >>>>> 00:1f.2 SATA controller: Intel Corporation 5 Series/3400 Series Chipset >>>>> 4 port SATA AHCI Controller (rev 05) >>>>> 00:1f.3 SMBus: Intel Corporation 5 Series/3400 Series Chipset SMBus >>>>> Controller (rev 05) >>>>> 00:1f.6 Signal processing controller: Intel Corporation 5 Series/3400 >>>>> Series Chipset Thermal Subsystem (rev 05) >>>>> 05:00.0 Network controller: Broadcom Corporation BCM4313 802.11b/g/n >>>>> Wireless LAN Controller (rev 01) >>>>> ff:00.0 Host bridge: Intel Corporation Core Processor QuickPath >>>>> Architecture Generic Non-core Registers (rev 02) >>>>> ff:00.1 Host bridge: Intel Corporation Core Processor QuickPath >>>>> Architecture System Address Decoder (rev 02) >>>>> ff:02.0 Host bridge: Intel Corporation Core Processor QPI Link 0 (rev >>>>> 02) >>>>> ff:02.1 Host bridge: Intel Corporation Core Processor QPI Physical 0 >>>>> (rev 02) >>>>> ff:02.2 Host bridge: Intel Corporation Core Processor Reserved (rev 02) >>>>> ff:02.3 Host bridge: Intel Corporation Core Processor Reserved (rev 02) >>>>> >>>>> Agregue la interfaz en /etc/network/interfaces, pero al querer >>>>> levantarla >>>>> >>>>> # /etc/init.d/networking restart >>>>> [....] Running /etc/init.d/networking restart is deprecated because it >>>>> may not re-enable some inte[warns ... (warning). >>>>> [....] Reconfiguring network interfaces...Internet Systems Consortium >>>>> DHCP Client 4.2.2 >>>>> Copyright 2004-2011 Internet Systems Consortium. >>>>> All rights reserved. >>>>> For info, please visit https://www.isc.org/software/dhcp/ >>>>> >>>>> Cannot find device "eth0" >>>>> Bind socket to interface: No such device >>>>> Failed to bring up eth0. >>>>> done. >>>>> >>>>> No sé por donde mas seguir no se me ocurre nada. >>>>> >>>>> Atento a cualquier comentario >>>>> >>>>> Saludos >>>>> >>>>> -- >>>>> Atte. >>>>> Ricardo G. Zúñiga Bauer >>>>> Analista programador >>>>> Sitio web: http://ceaerrepe.com.ar >>>>> User Linux: #455331 >>>>> >>>> >>>> >>>> Si la placa es "on-board", se te quemó. >>>> Si es PCI, está floja. >>>> Sacala, limipiá con contamatic, y volvé a colocarla >>>> >>>> JAP >>>> >>>> >>>> >>>> -- >>>> To UNSUBSCRIBE, email to debian-user-spanish-requ...@lists.debian.org >>>> with a subject of "unsubscribe". Trouble? Contact >>>> listmas...@lists.debian.org >>>> Archive: http://lists.debian.org/52f25ac2.4020...@gmail.com >>>> >>>> >>> >>> >>> -- >>> Atte. >>> Ricardo G. Zúñiga Bauer >>> Analista programador >>> Sitio web: http://ceaerrepe.com.ar >>> User Linux: #455331 >>> >> >> >> Si te miras los logs lo sabrás.... >> > > > > -- > Atte. > Ricardo G. Zúñiga Bauer > Analista programador > Sitio web: http://ceaerrepe.com.ar > User Linux: #455331 > -- Atte. Ricardo G. Zúñiga Bauer Analista programador Sitio web: http://ceaerrepe.com.ar User Linux: #455331
