Me parece un poco raro que el pendrive se haya estropeado por enchufarlo en algún puerto de tu ordenador. Yo creo que más bien estaba ya estropeado. ¿Has probado a repararlo con GParted?
Santiago. El 3/11/2015 20:13, "Javier Barroso" <javibarr...@gmail.com> escribió: > Hola, > > Hoy he enchufado un pendrive en el ordenador. Debian no lo ha reconocido: > > Al meterlo en un slot (Creo que usb 2.0): > [ 244.707153] usb 1-1.2: USB disconnect, device number 5 > [ 262.588634] usb 1-1.2: new full-speed USB device number 6 using ehci-pci > [ 262.660694] usb 1-1.2: device descriptor read/64, error -32 > [ 262.836888] usb 1-1.2: device descriptor read/64, error -32 > [ 263.013090] usb 1-1.2: new full-speed USB device number 7 using ehci-pci > [ 263.085161] usb 1-1.2: device descriptor read/64, error -32 > [ 263.261350] usb 1-1.2: device descriptor read/64, error -32 > [ 263.437595] usb 1-1.2: new full-speed USB device number 8 using ehci-pci > [ 263.846029] usb 1-1.2: device not accepting address 8, error -32 > [ 263.918123] usb 1-1.2: new full-speed USB device number 9 using ehci-pci > [ 264.326490] usb 1-1.2: device not accepting address 9, error -32 > [ 264.326672] usb 1-1-port2: unable to enumerate USB device > > Al meterlo en otro slot (Creo que usb 3.0): > [ 290.055719] usb 3-2: new full-speed USB device number 3 using xhci_hcd > [ 290.167823] usb 3-2: device descriptor read/64, error -71 > [ 290.384073] usb 3-2: device descriptor read/64, error -71 > [ 290.600335] usb 3-2: new full-speed USB device number 4 using xhci_hcd > [ 290.712490] usb 3-2: device descriptor read/64, error -71 > [ 290.928717] usb 3-2: device descriptor read/64, error -71 > [ 291.144938] usb 3-2: new full-speed USB device number 5 using xhci_hcd > [ 291.145137] usb 3-2: Device not responding to setup address. > [ 291.349353] usb 3-2: Device not responding to setup address. > [ 291.553357] usb 3-2: device not accepting address 5, error -71 > [ 291.665536] usb 3-2: new full-speed USB device number 6 using xhci_hcd > [ 291.665734] usb 3-2: Device not responding to setup address. > [ 291.869933] usb 3-2: Device not responding to setup address. > [ 292.073931] usb 3-2: device not accepting address 6, error -71 > [ 292.073972] usb usb3-port2: unable to enumerate USB device > [ 314.575485] usb 3-1: new full-speed USB device number 7 using xhci_hcd > [ 314.687660] usb 3-1: device descriptor read/64, error -71 > [ 314.903902] usb 3-1: device descriptor read/64, error -71 > [ 315.120106] usb 3-1: new full-speed USB device number 8 using xhci_hcd > [ 315.232275] usb 3-1: device descriptor read/64, error -71 > [ 315.448516] usb 3-1: device descriptor read/64, error -71 > [ 315.664720] usb 3-1: new full-speed USB device number 9 using xhci_hcd > [ 315.664943] usb 3-1: Device not responding to setup address. > [ 315.869119] usb 3-1: Device not responding to setup address. > [ 316.073195] usb 3-1: device not accepting address 9, error -71 > [ 316.185315] usb 3-1: new full-speed USB device number 10 using xhci_hcd > [ 316.185511] usb 3-1: Device not responding to setup address. > [ 316.389707] usb 3-1: Device not responding to setup address. > [ 316.593714] usb 3-1: device not accepting address 10, error -71 > [ 316.593784] usb usb3-port1: unable to enumerate USB device > > # rmmod xhci_hcd xhci_pci > [ 343.063775] xhci_hcd 0000:00:14.0: remove, state 4 > [ 343.063783] usb usb4: USB disconnect, device number 1 > [ 343.064060] xhci_hcd 0000:00:14.0: USB bus 4 deregistered > [ 343.064067] xhci_hcd 0000:00:14.0: remove, state 4 > [ 343.064070] usb usb3: USB disconnect, device number 1 > [ 343.064072] usb 3-4: USB disconnect, device number 2 > [ 343.100248] xhci_hcd 0000:00:14.0: USB bus 3 deregistered > # Lo meto otra vez > [ 413.799932] usb 1-1.2: new full-speed USB device number 10 using > ehci-pci > [ 413.872008] usb 1-1.2: device descriptor read/64, error -32 > [ 414.048212] usb 1-1.2: device descriptor read/64, error -32 > [ 414.224393] usb 1-1.2: new full-speed USB device number 11 using > ehci-pci > [ 414.296493] usb 1-1.2: device descriptor read/64, error -32 > [ 414.472693] usb 1-1.2: device descriptor read/64, error -32 > [ 414.648879] usb 1-1.2: new full-speed USB device number 12 using > ehci-pci > [ 415.057282] usb 1-1.2: device not accepting address 12, error -32 > [ 415.129451] usb 1-1.2: new full-speed USB device number 13 using > ehci-pci > [ 415.537807] usb 1-1.2: device not accepting address 13, error -32 > [ 415.537984] usb 1-1-port2: unable to enumerate USB device > > # rmmod ehci-pci ehci-hci > [ 447.424019] ehci-pci 0000:00:1d.0: remove, state 1 > [ 447.424040] usb usb2: USB disconnect, device number 1 > [ 447.424045] usb 2-1: USB disconnect, device number 2 > [ 447.424050] usb 2-1.6: USB disconnect, device number 3 > [ 447.431586] ehci-pci 0000:00:1d.0: USB bus 2 deregistered > [ 447.431985] ehci-pci 0000:00:1a.0: remove, state 1 > [ 447.432011] usb usb1: USB disconnect, device number 1 > [ 447.432015] usb 1-1: USB disconnect, device number 2 > [ 447.432017] usb 1-1.3: USB disconnect, device number 3 > [ 447.442600] usb 1-1.5: USB disconnect, device number 4 > [ 447.442963] qcserial ttyUSB0: Qualcomm USB modem converter now > disconnected from ttyUSB0 > [ 447.443008] qcserial 1-1.5:1.0: device disconnected > [ 447.444338] qcserial ttyUSB1: Qualcomm USB modem converter now > disconnected from ttyUSB1 > [ 447.444356] qcserial 1-1.5:1.2: device disconnected > [ 447.446125] qcserial ttyUSB2: Qualcomm USB modem converter now > disconnected from ttyUSB2 > [ 447.446146] qcserial 1-1.5:1.3: device disconnected > [ 447.448597] qmi_wwan 1-1.5:1.8 wwan0: unregister 'qmi_wwan' > usb-0000:00:1a.0-1.5, WWAN/QMI device > [ 447.482521] ehci-pci 0000:00:1a.0: USB bus 1 deregistered > > Hasta aquí mi intento de montar el dispositivo .... y después, al > meterlo en un windows ... no lo reconoce. Me insisten en que antes sí > lo reconocía, ya no sé yo. > > La cosa es que me dicen que es el segundo pendrive que linux se carga, > yo no estoy seguro, no creo que por hacer lo que he hecho se haya > podido romper, pero ... ¿quién sabe? > > ¿Algún consejo? > > Gracias ! > >
