On Thursday, August 29, 2019 9:27:18 AM -03 Gonzalo Rivero wrote: > Buen día, > hace unos días actualicé mi debian testing y me di con que mi placa de > red no funciona... y probablemente hace mucho no funciona porque venía > manejándome exclusivamente por wifi > según lspci -v -k: > 02:00.0 Ethernet controller: Realtek Semiconductor Co., Ltd. RTL810xE PCI > Express Fast Ethernet controller (rev 05) Subsystem: Realtek Semiconductor > Co., Ltd. RTL810xE PCI Express Fast Ethernet controller Flags: fast devsel, > IRQ 17 > I/O ports at d000 [size=256] > Memory at d0604000 (64-bit, prefetchable) [size=4K] > Memory at d0600000 (64-bit, prefetchable) [size=16K] > Capabilities: [40] Power Management version 3 > Capabilities: [50] MSI: Enable- Count=1/1 Maskable- 64bit+ > Capabilities: [70] Express Endpoint, MSI 01 > Capabilities: [b0] MSI-X: Enable- Count=4 Masked- > Capabilities: [d0] Vital Product Data > Capabilities: [100] Advanced Error Reporting > Capabilities: [140] Virtual Channel > Capabilities: [160] Device Serial Number 00-00-00-00-00-00-00-00 > Kernel modules: r8169 > > según lsmod tengo cargado el módulo: > lsmod |grep 8169 > r8169 98304 0 > libphy 94208 2 r8169,realtek > > pero ifconfig -a no aparece nada cableado: > lo: flags=73<UP,LOOPBACK,RUNNING> mtu 65536 > inet 127.0.0.1 netmask 255.0.0.0 > inet6 ::1 prefixlen 128 scopeid 0x10<host> > loop txqueuelen 1000 (Local Loopback) > RX packets 253 bytes 36319 (35.4 KiB) > RX errors 0 dropped 0 overruns 0 frame 0 > TX packets 253 bytes 36319 (35.4 KiB) > TX errors 0 dropped 0 overruns 0 carrier 0 collisions 0 > > tun0: flags=4305<UP,POINTOPOINT,RUNNING,NOARP,MULTICAST> mtu 1500 > inet 10.0.219.22 netmask 255.255.255.255 destination 10.0.219.21 > inet6 fe80::5ca3:a319:866d:ed6e prefixlen 64 scopeid 0x20<link> > unspec 00-00-00-00-00-00-00-00-00-00-00-00-00-00-00-00 txqueuelen > 100 (UNSPEC) RX packets 16269 bytes 6831208 (6.5 MiB) > RX errors 0 dropped 0 overruns 0 frame 0 > TX packets 13743 bytes 836991 (817.3 KiB) > TX errors 0 dropped 4 overruns 0 carrier 0 collisions 0 > > wlp1s0: flags=4163<UP,BROADCAST,RUNNING,MULTICAST> mtu 1500 > inet 172.21.234.143 netmask 255.255.0.0 broadcast 172.21.255.255 > inet6 fe80::1acf:5eff:fe6a:ac3c prefixlen 64 scopeid 0x20<link> > ether 18:cf:5e:6a:ac:3c txqueuelen 1000 (Ethernet) > RX packets 106881 bytes 73644461 (70.2 MiB) > RX errors 0 dropped 0 overruns 0 frame 0 > TX packets 85649 bytes 14929711 (14.2 MiB) > TX errors 0 dropped 0 overruns 0 carrier 0 collisions 0 > > no se que se me está pasando por alto o que estoy haciendo mal al buscar > ayuda en google?
Buenas es muy posible que te falte el firmware chequea el dmesg para ver si encontras algo referente a eso. muy posiblemente este en el paquete firmware-realtek saludos Matias
