Hola,
Pues nada que me estoy peleando con el hylafax y he tenido que modificar
el script que se ejecuta al recibir los faxes para poder imprimir directamente
los faxes que llegan (esta comentado) y para enviar por mail el fax como
adjunto PDF, TIFF, PNG, y JPEG ademas del PS que ya enviaba...
Os lo pongo adjunto.
Un ejemplo de tama�o seg�n formato:
# TIFF -> 26 KBytes
# PNG -> 21 KBytes
# PDF -> 55 KBytes
JPEG
# jpeg pierde informaci�n al comprimir, con -quality 75 queda bien
# y no se ahorra mucho espacio reduciendo la calidad, ejemplos:
# 75 172 KBytes se ve bien
# 50 142 KBytes puntitos alrededor del texto
# 25 115 KBytes nuve alrededor del texto
# 0 63 KBytes inhumano :-)
El PNG se ve perfecto, y es el formato que mas comprime, pero hay problemas
al imprimir con algunos navegadores
�Que opinais?
Por cierto �usais hylafax? �con que modem (marca/modelo)? �te va bien?
Lo cierto es que configurarlo es "un infierno" llevo una semana y aun no he
acabado, menos mal que los retos "me ponen" :-)
Que aproveche ;-)
Saludos,
--
-------------------------------------------------
Manel Marin e-mail: [EMAIL PROTECTED]
Linux Powered (Debian 2.1 slink) kernel 2.2.14
Mira mis chuletas de Linux en http://perso.wanadoo.es/manel3
-------------------------------------------------
Mi petici�n de drivers para Linux es la n� 33126
(Pasate por http://www.libranet.com/petition.html ;-)
#! /bin/sh
# faxrcvd de Hylafax modificado para imprimir faxes que llegan (comentado)
# y enviar por mail como adjuntos PDF, TIFF, PNG, y JPEG (ademas del PS)
# elige el que quieras y comenta los demas...
#
# modificaciones: (c) 2000 Manel Marin, bajo la licencia GNU GPL
#
#
#
# $Id: faxrcvd,v 1.2 1998/03/05 23:27:32 behanw Exp $
#
# HylaFAX Facsimile Software
#
# Copyright (c) 1990-1996 Sam Leffler
# Copyright (c) 1991-1996 Silicon Graphics, Inc.
# HylaFAX is a trademark of Silicon Graphics
#
# Permission to use, copy, modify, distribute, and sell this software and
# its documentation for any purpose is hereby granted without fee, provided
# that (i) the above copyright notices and this permission notice appear in
# all copies of the software and related documentation, and (ii) the names of
# Sam Leffler and Silicon Graphics may not be used in any advertising or
# publicity relating to the software without the specific, prior written
# permission of Sam Leffler and Silicon Graphics.
#
# THE SOFTWARE IS PROVIDED "AS-IS" AND WITHOUT WARRANTY OF ANY KIND,
# EXPRESS, IMPLIED OR OTHERWISE, INCLUDING WITHOUT LIMITATION, ANY
# WARRANTY OF MERCHANTABILITY OR FITNESS FOR A PARTICULAR PURPOSE.
#
# IN NO EVENT SHALL SAM LEFFLER OR SILICON GRAPHICS BE LIABLE FOR
# ANY SPECIAL, INCIDENTAL, INDIRECT OR CONSEQUENTIAL DAMAGES OF ANY KIND,
# OR ANY DAMAGES WHATSOEVER RESULTING FROM LOSS OF USE, DATA OR PROFITS,
# WHETHER OR NOT ADVISED OF THE POSSIBILITY OF DAMAGE, AND ON ANY THEORY OF
# LIABILITY, ARISING OUT OF OR IN CONNECTION WITH THE USE OR PERFORMANCE
# OF THIS SOFTWARE.
#
#
# Modifications by: Behan Webster <[EMAIL PROTECTED]>
#
#
# faxrcvd file devID commID error-msg
#
if [ $# != 4 ]; then
echo "Usage: $0 file devID commID error-msg"
exit 1
fi
test -f etc/setup.cache || {
SPOOL=`pwd`
cat<<EOF
FATAL ERROR: $SPOOL/etc/setup.cache is missing!
The file $SPOOL/etc/setup.cache is not present. This
probably means the machine has not been setup using the faxsetup(1M)
command. Read the documentation on setting up HylaFAX before you
startup a server system.
EOF
exit 1
}
. etc/setup.cache
INFO=$SBIN/faxinfo
FAX2PS=$TIFFBIN/fax2ps
SENDFROM=hylafax
TOADDR=FaxMaster
#
# There is no good portable way to find out the fully qualified
# domain name (FQDN) of the host or the TCP port for the hylafax
# service so we fudge here. Folks may want to tailor this to
# their needs; e.g. add a domain or use localhost so the loopback
# interface is used.
#
HOSTNAME=`hostname` # XXX no good way to find FQDN
PORT=4559 # XXX no good way to lookup service
###########################################################################
# Send email about fax
#
function emailfax () {
TO=$1
FROM=$2
NUM=$3
FAX=$4
DEV=$5
LOG=$6
ERR=$7
SENT=$8
(MIMEBOUNDARY="NextPart$$"
echo "Mime-Version: 1.0"
echo "Content-Type: Multipart/Mixed; Boundary=\"$MIMEBOUNDARY\""
echo "Content-Transfer-Encoding: 7bit"
echo "To: $TO"
echo "From: The HylaFAX Receive Agent <$FROM>"
echo "Subject: facsimile received from $NUM";
echo ""
echo "--$MIMEBOUNDARY"
echo "Content-Type: text/plain"
echo "Content-Description: FAX info"
echo "Content-Transfer-Encoding: 7bit"
echo ""
echo "$FILE (ftp://$HOSTNAME:$PORT/$FAX):"; $INFO -n $FAX
echo "ReceivedOn: $DEV"
if [ "$ERR" ]; then
echo ""
echo "The full document was not received because:"
echo ""
echo " $ERR"
echo ""
echo " ---- Transcript of session follows ----"
echo ""
if [ -f log/c$COMMID ]; then
$SED -e '/-- data/d' \
-e '/start.*timer/d' -e '/stop.*timer/d' \
log/c$LOG
elif [ -n "$LOG" ]; then
echo " No transcript available (CommID c$LOG)."
else
echo " No transcript available."
fi
else
echo "CommID: c$LOG (ftp://$HOSTNAME:$PORT/log/c$LOG)"
fi
if [ -n "$SENT" ]; then
echo ""
echo "The facsimile was automatically dispatched to: $SENT."
fi
echo ""
echo ""
# A partir de aqui son los adjuntos, comenta o borra los que no quieras
# PS: Este adjunto era el original... Los demas son mios :-)
echo "--$MIMEBOUNDARY"
echo "Content-Type: application/postscript"
echo "Content-Description: FAX document in PS"
echo "Content-Transfer-Encoding: 7bit"
echo ""
$FAX2PS $FAX 2>/dev/null
echo ""
# PDF: Para convertir ps a pdf parto de como lo hace el script ps2pdf
# y sustituyo entrada y salida por stdin y stdout (con el simbolo "-")
# para poder enviar el correo por internet hace falta codificarlo
# a base64 con mimencode, ya que el pdf contiene codigos de 8 bits
echo "--$MIMEBOUNDARY"
echo "Content-Type: application/pdf"
echo "Content-Description: FAX document in PDF"
echo "Content-Transfer-Encoding: base64"
echo ""
$FAX2PS $FAX 2>/dev/null | gs -q -dNOPAUSE -dBATCH -sDEVICE=pdfwrite
-sOutputFile=- $OPTIONS -c save pop - | mimencode
echo ""
# TIFF: Ya es tiff, no hay que convertir ;-)
echo "--$MIMEBOUNDARY"
echo "Content-Type: image/tiff"
echo "Content-Description: FAX document in TIFF"
echo "Content-Transfer-Encoding: base64"
echo ""
cat $FAX | mimencode
echo ""
# PNG: Requiere paquetes: netpbm, pnmtopng
# se ve perfecto, pero hay problemas al imprimir con algunos navegadores
# es el formato que comprime MAS y *SIN* perdida de calidad
echo "--$MIMEBOUNDARY"
echo "Content-Type: image/png"
echo "Content-Description: FAX document in PNG"
echo "Content-Transfer-Encoding: base64"
echo ""
tifftopnm $FAX 2>/dev/null | pnmtopng | mimencode
echo ""
# JPEG: Requiere paquete: netpbm, libjpeg-progs
# El pbmtopgm convierte a escala de grises aplicando antialiasing
# jpeg pierde informaci�n al comprimir, con -quality 75 queda bien
# y no se ahorra mucho espacio reduciendo la calidad, ejemplos:
#
# 75 172KBytes se ve bien
# 50 142KBytes puntitos alrededor del texto
# 25 115KBytes nuve alrededor del texto
# 0 63KBytes inhumano :-)
#
# El mismo fax en los otros formatos:
# TIFF -> 26KBytes
# PNG -> 21KBytes
# PDF -> 55KBytes
#
echo "--$MIMEBOUNDARY"
echo "Content-Type: image/jpeg"
echo "Content-Description: FAX document in JPEG"
echo "Content-Transfer-Encoding: base64"
echo ""
tifftopnm $FAX 2>/dev/null | pbmtopgm 1 1 | cjpeg -grayscale -quality
75 | mimencode
echo ""
# Finalizamos el mail
echo "--$MIMEBOUNDARY--"
) | 2>&1 $SENDMAIL -f$FROM -oi $TO
}
###########################################################################
FILE="$1"
DEVICE="$2"
COMMID="$3"
MSG="$4"
if [ -f $FILE ]; then
#
# Check the sender's TSI and setup to dispatch
# facsimile received from well-known senders.
#
SENDER="`$INFO $FILE | $AWK -F: '/Sender/ { print $2 }' 2>/dev/null`"
SENDTO=
if [ -f etc/FaxDispatch ]; then
. etc/FaxDispatch # NB: FaxDispatch sets SENDTO based on
$SENDER
fi
if [ -n "$TOADDR" ]; then
#Comentar esta linea de "emailfax" para no enviar por mail los faxes que llegan,
# esto es util solo si descomentamos la impresi�n directa...
emailfax "$TOADDR" "$SENDFROM" "$SENDER" "$FILE" "$DEVICE"
"$COMMID" "$MSG" "$SENDTO"
#Descomentar las lineas siguiente para imprimir directamente cada fax que llega
# PRINT="lpr" #Comando para poner trabajo en cola de impresi�n
# $FAX2PS $FILE 2>/dev/null | $PRINT
fi
if [ -n "$SENDTO" ]; then
emailfax "$SENDTO" "$SENDFROM" "$SENDER" "$FILE" "$DEVICE"
"$COMMID" "$MSG"
fi
else
#
# Generate notification mail for a failed attempt.
#
(echo "To: $TOADDR"
echo "From: The HylaFAX Receive Agent <$FROM>"
echo "Subject: facsimile not received"
echo ""
echo "An attempt to receive facsimile on $DEVICE failed because:"
echo ""
echo " $MSG"
echo ""
echo " ---- Transcript of session follows ----"
echo ""
if [ -f log/c$COMMID ]; then
$SED -e '/-- data/d' \
-e '/start.*timer/d' -e '/stop.*timer/d' \
log/c$COMMID
elif [ -n "$COMMID" ]; then
echo " No transcript available (CommID c$COMMID)."
else
echo " No transcript available."
fi
) | 2>&1 $SENDMAIL -f$FROM -oi $TOADDR
fi
