Bueno, evidentemente ten�s experiencia "interpretando" las necesidades
de los miembros de la lista.
Te cuento que el problema por el que hice la consulta ya est�
solucionado pero no as� el que adivinaste.
Las X contin�an sin funcionar
Me dicen que no pueden encontrar el font por default (fixed). Al pie te
paso toda la lista de los mensajes que me genera.
Hice un apt-cache search fixed | grep font
Sin resultados, hacienda otras b�squedas instale unos cuantos entre los
que instale los xfonts-75dpi y xfonts-100dpi que probablemente sean los
referidos aunque llamados por su tama�o.
As� fui instalando todos los paquetes de fonts, los �nicos que no pude
encontrar son los cyrilic.
Si se te ocurre (o a cualquier otro) cu�l puede ser el problema voy a
estar muy agradecido.
XFree86 Version 3.3.6a / X Window System
(protocol Version 11, revision 0, vendor release 6300)
Release Date: xx November 2000
If the server is older than 6-12 months, or if your card is
newer
than the above date, look for a newer version before reporting
problems. (see http://www.XFree86.Org/FAQ)
Operating System: Linux 2.4.13 i686 [ELF]
Configured drivers:
SVGA: server for SVGA graphics adaptors (Patchlevel 1):
NV1, STG2000, RIVA 128, RIVA TNT, RIVA TNT2, RIVA ULTRA TNT2,
RIVA VANTA, RIVA ULTRA VANTA, RIVA INTEGRATED, GeForce 256,
GeForce DDR, Quadro, GeForce2 GTS, GeForce2 GTS (rev1),
GeForce2 Ultra, Quadro 2 Pro, GeForce2 MX, GeForce2 MX DDR,
Quadro 2 MXR, ET4000, ET4000W32, ET4000W32i, ET4000W32i_rev_b,
ET4000W32i_rev_c, ET4000W32p, ET4000W32p_rev_a, ET4000W32p_rev_b,
ET4000W32p_rev_c, ET4000W32p_rev_d, ET6000, ET6100, et3000, pvga1,
wd90c00, wd90c10, wd90c30, wd90c24, wd90c31, wd90c33, gvga, r128,
ati,
sis86c201, sis86c202, sis86c205, sis86c215, sis86c225, sis5597,
sis5598, sis6326, sis530, sis620, sis300, sis630, sis540,
tvga8200lx,
tvga8800cs, tvga8900b, tvga8900c, tvga8900cl, tvga8900d, tvga9000,
tvga9000i, tvga9100b, tvga9200cxr, tgui9400cxi, tgui9420,
tgui9420dgi,
tgui9430dgi, tgui9440agi, cyber9320, tgui9660, tgui9680, tgui9682,
tgui9685, cyber9382, cyber9385, cyber9388, cyber9397, cyber9520,
cyber9525, 3dimage975, 3dimage985, cyber9397dvd, blade3d,
cyberblade,
clgd5420, clgd5422, clgd5424, clgd5426, clgd5428, clgd5429,
clgd5430,
clgd5434, clgd5436, clgd5446, clgd5480, clgd5462, clgd5464,
clgd5465,
clgd6205, clgd6215, clgd6225, clgd6235, clgd7541, clgd7542,
clgd7543,
clgd7548, clgd7555, clgd7556, ncr77c22, ncr77c22e, cpq_avga,
mga2064w,
mga1064sg, mga2164w, mga2164w AGP, mgag200, mgag100, mgag400,
oti067,
oti077, oti087, oti037c, al2101, ali2228, ali2301, ali2302,
ali2308,
ali2401, cl6410, cl6412, cl6420, cl6440, video7, ark1000vl,
ark1000pv,
ark2000pv, ark2000mt, mx, realtek, s3_savage, s3_virge, AP6422,
AT24,
AT3D, s3_svga, NM2070, NM2090, NM2093, NM2097, NM2160, NM2200,
ct65520, ct65525, ct65530, ct65535, ct65540, ct65545, ct65546,
ct65548, ct65550, ct65554, ct65555, ct68554, ct69000, ct64200,
ct64300, mediagx, V1000, V2100, V2200, p9100, spc8110, i740,
i740_pci,
Voodoo Banshee, Voodoo3, smi, generic
(using VT number 7)
XF86Config: /etc/X11/XF86Config
(**) stands for supplied, (--) stands for probed/default values
(--) no ModulePath specified using default: /usr/X11R6/lib/modules
pex5.so: Unknown error loading module
xie.so: Unknown error loading module
(**) XKB: rules: "xfree86"
(**) XKB: model: "pc104"
(**) XKB: layout: "us"
(**) Mouse: type: Microsoft, device: /dev/ttyS0, baudrate: 1200
(**) Mouse: buttons: 3, 3 button emulation (timeout: 50ms)
(**) SVGA: Graphics device ID: "Trident 9880"
(**) SVGA: Monitor ID: "Samsung Syncmaster 500s"
(--) SVGA: Mode "640x350" needs vert refresh rate of 85.08 Hz. Deleted.
(--) SVGA: Mode "640x400" needs vert refresh rate of 85.08 Hz. Deleted.
(--) SVGA: Mode "720x400" needs vert refresh rate of 85.04 Hz. Deleted.
(--) SVGA: Mode "640x480" needs vert refresh rate of 85.01 Hz. Deleted.
(--) SVGA: Mode "800x600" needs hsync freq of 53.72 kHz. Deleted.
(--) SVGA: Mode "1024x768" needs vert refresh rate of 86.96 Hz. Deleted.
(--) SVGA: Mode "1024x768" needs hsync freq of 56.48 kHz. Deleted.
(--) SVGA: Mode "1024x768" needs hsync freq of 60.06 kHz. Deleted.
(--) SVGA: Mode "1024x768" needs hsync freq of 68.68 kHz. Deleted.
(--) SVGA: Mode "1152x864" needs hsync freq of 67.50 kHz. Deleted.
(--) SVGA: Mode "1280x960" needs hsync freq of 60.00 kHz. Deleted.
(--) SVGA: Mode "1280x960" needs hsync freq of 85.94 kHz. Deleted.
(--) SVGA: Mode "1280x1024" needs hsync freq of 63.98 kHz. Deleted.
(--) SVGA: Mode "1280x1024" needs hsync freq of 79.98 kHz. Deleted.
(--) SVGA: Mode "1280x1024" needs hsync freq of 91.15 kHz. Deleted.
(--) SVGA: Mode "1600x1200" needs hsync freq of 75.00 kHz. Deleted.
(--) SVGA: Mode "1600x1200" needs hsync freq of 81.25 kHz. Deleted.
(--) SVGA: Mode "1600x1200" needs hsync freq of 87.50 kHz. Deleted.
(--) SVGA: Mode "1600x1200" needs hsync freq of 93.75 kHz. Deleted.
(--) SVGA: Mode "1600x1200" needs hsync freq of 106.25 kHz. Deleted.
(--) SVGA: Mode "1792x1344" needs hsync freq of 83.66 kHz. Deleted.
(--) SVGA: Mode "1792x1344" needs hsync freq of 106.27 kHz. Deleted.
(--) SVGA: Mode "1856x1392" needs hsync freq of 86.35 kHz. Deleted.
(--) SVGA: Mode "1856x1392" needs hsync freq of 112.50 kHz. Deleted.
(--) SVGA: Mode "1920x1440" needs hsync freq of 90.00 kHz. Deleted.
(--) SVGA: Mode "1920x1440" needs hsync freq of 112.50 kHz. Deleted.
Warning: The directory "/usr/lib/X11/fonts/cyrillic" does not exist.
Entry deleted from font path.
Warning: The directory "/usr/lib/X11/fonts/CID" does not exist.
Entry deleted from font path.
(**) FontPath set to
"unix/:7100,/usr/lib/X11/fonts/misc,/usr/lib/X11/fonts/100dpi/:unscaled,
/usr/lib/X11/fonts/75dpi/:unscaled,/usr/lib/X11/fonts/Type1,/usr/lib/X11
/fonts/Speedo,/usr/lib/X11/fonts/100dpi,/usr/lib/X11/fonts/75dpi"
(--) SVGA: PCI: Trident TGUI 96xx rev 211, Memory @ 0xff400000, MMIO @
0xffbe0000
(--) Trident chipset version: 0xd3 (TGUI96xx)
(--) SVGA: BIOS reports Clock Control Bits 0x0
(--) SVGA: Detected a Trident 9680.
(--) SVGA: Revision 1.
(--) SVGA: Using Trident programmable clocks
(--) SVGA: chipset: tgui9680
(**) SVGA: videoram: 1024k
(**) SVGA: Using 16 bpp, Depth 16, Color weight: 565
(--) SVGA: Maximum allowed dot-clock: 135.000 MHz
(--) SVGA: There is no mode definition named "1152x864"
(--) SVGA: Removing mode "1152x864" from list of valid modes.
(**) SVGA: Mode "1024x768": mode clock = 65.000
(--) SVGA: Insufficient video memory for all resolutions
(--) SVGA: Removing mode "1024x768" from list of valid modes.
(**) SVGA: Mode "800x600": mode clock = 49.500
(**) SVGA: Mode "640x480": mode clock = 31.500
(--) SVGA: Virtual resolution set to 800x600
(--) SVGA: SpeedUp code selection modified because virtualX != 1024
(--) SVGA: Using Linear Frame Buffer at 0x0ff400000, Size 1MB
_FontTransSocketUNIXConnect: Can't connect: errno = 111
Could not init font path element unix/:7100, removing from list!
Fatal server error:
could not open default font 'fixed'
When reporting a problem related to a server crash, please send
the full server output, not just the last messages
X connection to :0.0 broken (explicit kill or server shutdown).
-----Mensaje original-----
De: [EMAIL PROTECTED] [mailto:[EMAIL PROTECTED] En
nombre de Javi Castelo
Enviado el: Mi�rcoles, 26 de Diciembre de 2001 04:55 p.m.
Para: [email protected]
CC: [email protected]
Asunto: Re: Presentaci�n y consulta
Fernando Barcelo escribi�:
> ----- Forwarded message from Fernando Barcelo <[EMAIL PROTECTED]>
-----
>
> From: "Fernando Barcelo" <[EMAIL PROTECTED]>
> To: "Amaya" <[EMAIL PROTECTED]>
> Subject: Presentaci�n y consulta
> Date: Wed, 26 Dec 2001 13:58:48 -0300
> X-Mailer: Microsoft Outlook Express 5.50.4522.1200
>
> Antes que nada me presento, Trabajo en la administraci�n de los
sistemas
> de Playcenter (una empresa de parques de juegos electr�nicos y
> electromec�nicos).
>
> En la empresa se utilizan servidores Novell, NT y a partir de que yo
> entr� en la misma, obviamente Debian GNU/Linux.
> Poco a poco voy migrando todo a Linux.
> Sin embargo soy bastante nuevito en Linux tengo solo unos 8 meses de
> experiencia pero al contrario de lo que se dice me result� s�mamente
> f�cil de aprender, las cosas funcionan de un modo muy l�gico y
> transparente y la documentaci�n es abundante y clara.
> Hace unos 3 meses que estoy participando en la lista de Lugar (Linux
> User Group de Argentina) y ahora decid� unirme a una lista m�s
> espec�fica de Debian.
>
> Para debutar y como no pod�a ser de otra forma les tiro una consulta,
> por requerimiento de un soft, tuve que actualizar las locales, lo hice
> con apt-get y todo funciona perfectamente, sin embargo ahora cada vez
> que las tiene que usar recibo el siguiente mensaje (Este sali� al
> instalar xserver)
>
> perl: warning: Setting locale failed.
> perl: warning: Please check that your locale settings:
> LANGUAGE = (unset),
> LC_ALL = "es_ES",
> LANG = "es_ES"
> are supported and installed on your system.
> perl: warning: Falling back to the standard locale ("C").
>
> Setting up xserver-common-v3 (3.3.6-41) ...
>
> Setting up xserver-svga (3.3.6-41) ...
> perl: warning: Setting locale failed.
> perl: warning: Please check that your locale settings:
> LANGUAGE = (unset),
> LC_ALL = "es_ES",
> LANG = "es_ES"
> are supported and installed on your system.
> perl: warning: Falling back to the standard locale ("C").
>
> �Alguien sabe como solucionarlo?
A ver si se te arregla con este par de "movimientos" ...
que me los voy a grabar en la frente, como root haces:
1) dpkg-reconfigure locales
y eliges es_ES ISO-....
2) dpkg-reconfigure console-data
y eliges "Select keymap from arch list" ---> Qwerty --->
---> Spanish ---> Standard ---> Standard.
Haz un logout y vuelve a entrar, prueba ahora ha instalar un paquete.
Y como esto ya me suena de m�s de una vez, y veo por donde van los tiros
te adelanto que para las Xs versi�n 4 pruebes con:
3) dpkg-reconfigure xserver-xfree86
Procura tener a mano la documentaci�n del hardware de video (tarjeta,
monitor, etc).
A ese trinomio lo voy a bautizar con el nombre:
"Los tres mandamientos DPKG-RECONFIGURE de Potato a Woody"
--
Javi Castelo
Corriendo Debian GNU/Linux Woody ....
y perpetutuo estado de aprendizaje
--
To UNSUBSCRIBE, email to [EMAIL PROTECTED]
with a subject of "unsubscribe". Trouble? Contact
[EMAIL PROTECTED]
_________________________________________________________
Do You Yahoo!?
Get your free @yahoo.com address at http://mail.yahoo.com
