Victor Sanahuja escribiu:
-----BEGIN PGP SIGNED MESSAGE-----
Hash: SHA1
el usb-storage no, pero de todas formas no se bien como dices que
lo prueba, compilo un kernel con esos modulos, los cargo y luego
que, que programa o que comando uso para que pase las fotos a un
directorio?
En bulma hay un buen articulo que te explica como hacerlo:
http://bulmalug.net/body.phtml?nIdNoticia=1533
No lo dice, pero como lo tienes como montar con vfat, activa tabmien
vfat en el nucleo :)
Ya lo he hecho as�, y no consigo hacerla funcionar, si compilo como "no"
modulos, ya no hace nada, y si compilo como modulos todas las opciones
del articulo, luego en /proc/bus/usb/devices si monto con mount -t
usbdevfs none /proc/bus/usb si sale que algo reconoce, pero luego al
intentar montar como scsi me dice que nada de nada.
Con usbview me cuenta que hay esto conectado:
Unknown Device
Speed: 12Mb/s (full)
USB Version: 1.00
Device Class: 00(>ifc )
Device Subclass: 00
Device Protocol: 00
Maximum Default Endpoint Size: 8
Number of Configurations: 1
Vendor Id: 04a5
Product Id: 3003
Revision Number: 1.00
Config Number: 1
Number of Interfaces: 2
Attributes: 80
MaxPower Needed: 500mA
Interface Number: 0
Name: (none)
Alternate Number: 0
Class: ff(vend.)
Sub Class: 0
Protocol: 0
Number of Endpoints: 1
Endpoint Address: 81
Direction: in
Attribute: 1
Type: Isoc
Max Packet Size: 0
Interval: 1ms
Interface Number: 0
Name: (none)
Alternate Number: 1
Class: ff(vend.)
Sub Class: 0
Protocol: 0
Number of Endpoints: 1
Endpoint Address: 81
Direction: in
Attribute: 1
Type: Isoc
Max Packet Size: 128
Interval: 1ms
Interface Number: 0
Name: (none)
Alternate Number: 2
Class: ff(vend.)
Sub Class: 0
Protocol: 0
Number of Endpoints: 1
Endpoint Address: 81
Direction: in
Attribute: 1
Type: Isoc
Max Packet Size: 384
Interval: 1ms
Interface Number: 0
Name: (none)
Alternate Number: 3
Class: ff(vend.)
Sub Class: 0
Protocol: 0
Number of Endpoints: 1
Endpoint Address: 81
Direction: in
Attribute: 1
Type: Isoc
Max Packet Size: 512
Interval: 1ms
Interface Number: 0
Name: (none)
Alternate Number: 4
Class: ff(vend.)
Sub Class: 0
Protocol: 0
Number of Endpoints: 1
Endpoint Address: 81
Direction: in
Attribute: 1
Type: Isoc
Max Packet Size: 640
Interval: 1ms
Interface Number: 0
Name: (none)
Alternate Number: 5
Class: ff(vend.)
Sub Class: 0
Protocol: 0
Number of Endpoints: 1
Endpoint Address: 81
Direction: in
Attribute: 1
Type: Isoc
Max Packet Size: 768
Interval: 1ms
Interface Number: 0
Name: (none)
Alternate Number: 6
Class: ff(vend.)
Sub Class: 0
Protocol: 0
Number of Endpoints: 1
Endpoint Address: 81
Direction: in
Attribute: 1
Type: Isoc
Max Packet Size: 896
Interval: 1ms
Interface Number: 0
Name: (none)
Alternate Number: 7
Class: ff(vend.)
Sub Class: 0
Protocol: 0
Number of Endpoints: 1
Endpoint Address: 81
Direction: in
Attribute: 1
Type: Isoc
Max Packet Size: 1023
Interval: 1ms
Interface Number: 1
Name: (none)
Alternate Number: 0
Class: ff(vend.)
Sub Class: 0
Protocol: 0
Number of Endpoints: 3
Endpoint Address: 82
Direction: in
Attribute: 2
Type: Bulk
Max Packet Size: 64
Interval: 0ms
Endpoint Address: 03
Direction: out
Attribute: 2
Type: Bulk
Max Packet Size: 64
Interval: 0ms
Endpoint Address: 84
Direction: in
Attribute: 3
Type: Int.
Max Packet Size: 1
Interval: 1ms
Pero al intentar montar me dice que no hay nada
xuvenka:/# mount -t vfat /dev/sda1 /mnt
mount: /dev/sda1 is not a valid block device
xuvenka:/# mount -t vfat /dev/sda2 /mnt
mount: /dev/sda2 is not a valid block device
xuvenka:/# mount -t vfat /dev/sdb1 /mnt
mount: /dev/sdb1 is not a valid block device
xuvenka:/#
�Se puede conseguir algo? �o es mejor que lo deje para cuando alguien
que sepa m�s lo haga?
