Hola a todos:
Estoy configurando X-Window (sobre Woody) en una m�quina de la
oficina. En aquella la tarjeta gr�fica es una Intel 810 integrada en placa
base. He usado como herramienta de configuraci�n el script "xf86config" y,
si no me equivoco, creo que he configurado correctamente el servidor y las
frecuencias del v�deo. El caso es que por m�s que la reviso no consigo dar
con el problema que me impide arrancar las X.
Seguidamente os muestro una porci�n de XFree86.0.log
...
(II) Loading /usr/X11R6/lib/modules/linux/libint10.a
(II) Module int10: vendor="The XFree86 Project"
compiled for 4.1.0.1, module version = 1.0.0
ABI class: XFree86 Video Driver, version 0.4
(II) I810(0): initializing int10
(II) I810(0): Primary V_BIOS segment is: 0xc000
(II) I810(0): VESA BIOS detected
(II) I810(0): VESA VBE Version 2.0
(II) I810(0): VESA VBE Total Mem: 1024 kB
(II) I810(0): VESA VBE OEM: Intel810(TM) Graphics Chip Accelerated VGA BIOS
(II) I810(0): VESA VBE OEM Software Rev: 3.1
(II) I810(0): VESA VBE OEM Vendor: Intel Corporation
(II) I810(0): VESA VBE OEM Product: i810 Graphics Controller
(II) I810(0): VESA VBE OEM Product Rev: Hardware Version 0.0
(II) Loading sub module "ddc"
(II) LoadModule: "ddc"
(II) Loading /usr/X11R6/lib/modules/libddc.a
(II) Module ddc: vendor="The XFree86 Project"
compiled for 4.1.0.1, module version = 1.0.0
ABI class: XFree86 Video Driver, version 0.4
(II) I810(0): VESA VBE DDC supported
(II) I810(0): VESA VBE DDC Level 2
(II) I810(0): VESA VBE DDC transfer in appr. 1 sec.
(II) I810(0): VESA VBE DDC read successfully
(II) I810(0): Manufacturer: PHL Model: b15c Serial#: 105265
(II) I810(0): Year: 1999 Week: 20
(II) I810(0): EDID Version: 1.1
(II) I810(0): Analog Display Input, Input Voltage Level: 0.700/0.300 V
(II) I810(0): Sync: Separate
(II) I810(0): Max H-Image Size [cm]: horiz.: 28 vert.: 21
(II) I810(0): Gamma: 2.10
(II) I810(0): DPMS capabilities: StandBy Suspend Off; RGB/Color Display
(II) I810(0): redX: 0.625 redY: 0.340 greenX: 0.310 greenY: 0.592
(II) I810(0): blueX: 0.150 blueY: 0.063 whiteX: 0.281 whiteY: 0.311
(II) I810(0): Supported VESA Video Modes:
(II) I810(0): [EMAIL PROTECTED]
(II) I810(0): [EMAIL PROTECTED]
(II) I810(0): [EMAIL PROTECTED]
(II) I810(0): [EMAIL PROTECTED]
(II) I810(0): [EMAIL PROTECTED]
(II) I810(0): [EMAIL PROTECTED]
(II) I810(0): [EMAIL PROTECTED]
(II) I810(0): Manufacturer's mask: 0
(II) I810(0): Supported Future Video Modes:
(II) I810(0): #0: hsize: 800 vsize 600 refresh: 85 vid: 22853
(II) I810(0): #1: hsize: 640 vsize 480 refresh: 70 vid: 18993
(II) I810(0): #2: hsize: 640 vsize 480 refresh: 85 vid: 22833
(II) I810(0): Supported additional Video Mode:
(II) I810(0): clock: 25.2 MHz Image Size: 260 x 195 mm
(II) I810(0): h_active: 640 h_sync: 656 h_sync_end 752 h_blank_end 800
h_border: 0
(II) I810(0): v_active: 400 v_sync: 412 v_sync_end 414 v_blanking: 449
v_border: 0
(II) I810(0): Supported additional Video Mode:
(II) I810(0): clock: 25.2 MHz Image Size: 260 x 195 mm
(II) I810(0): h_active: 640 h_sync: 656 h_sync_end 752 h_blank_end 800
h_border: 0
(II) I810(0): v_active: 400 v_sync: 412 v_sync_end 414 v_blanking: 449
v_border: 0
(II) I810(0): Supported additional Video Mode:
(II) I810(0): clock: 25.2 MHz Image Size: 260 x 195 mm
(II) I810(0): h_active: 640 h_sync: 656 h_sync_end 752 h_blank_end 800
h_border: 0
(II) I810(0): v_active: 400 v_sync: 412 v_sync_end 414 v_blanking: 449
v_border: 0
(II) I810(0): Supported additional Video Mode:
(II) I810(0): clock: 25.2 MHz Image Size: 260 x 195 mm
(II) I810(0): h_active: 640 h_sync: 656 h_sync_end 752 h_blank_end 800
h_border: 0
(II) I810(0): v_active: 400 v_sync: 412 v_sync_end 414 v_blanking: 449
v_border: 0
(--) I810(0): Chipset: "i810e"
(--) I810(0): Linear framebuffer at 0xD0000000
(--) I810(0): IO registers at addr 0xD4100000
(EE) Unable to open /dev/agpgart (No such device)
(==) I810(0): Will alloc AGP framebuffer: 8192 kByte
(==) I810(0): Using gamma correction (1.0, 1.0, 1.0)
(II) I810(0): My Monitor: Using hsync range of 31.00-60.00 kHz
(II) I810(0): My Monitor: Using vrefresh range of 59.00-85.00 Hz
(II) I810(0): Clock range: 12.00 to 203.00 MHz
(II) I810(0): Not using default mode "800x600" (vrefresh out of range)
(II) I810(0): Not using default mode "1024x768" (unknown reason)
(II) I810(0): Not using default mode "1024x768" (hsync out of range)
(II) I810(0): Not using default mode "1152x864" (hsync out of range)
(II) I810(0): Not using default mode "1280x960" (hsync out of range)
(II) I810(0): Not using default mode "1280x1024" (hsync out of range)
(II) I810(0): Not using default mode "1280x1024" (hsync out of range)
(II) I810(0): Not using default mode "1280x1024" (hsync out of range)
(II) I810(0): Not using default mode "1600x1200" (hsync out of range)
(II) I810(0): Not using default mode "1600x1200" (hsync out of range)
(II) I810(0): Not using default mode "1600x1200" (hsync out of range)
(II) I810(0): Not using default mode "1600x1200" (hsync out of range)
(II) I810(0): Not using default mode "1600x1200" (bad mode
clock/interlace/doublescan)
(II) I810(0): Not using default mode "1792x1344" (bad mode
clock/interlace/doublescan)
(II) I810(0): Not using default mode "1792x1344" (bad mode
clock/interlace/doublescan)
(II) I810(0): Not using default mode "1856x1392" (bad mode
clock/interlace/doublescan)
(II) I810(0): Not using default mode "1856x1392" (bad mode
clock/interlace/doublescan)
(II) I810(0): Not using default mode "1920x1440" (bad mode
clock/interlace/doublescan)
(II) I810(0): Not using default mode "1920x1440" (bad mode
clock/interlace/doublescan)
(II) I810(0): Not using default mode "1400x1050" (hsync out of range)
(II) I810(0): Not using default mode "1400x1050" (hsync out of range)
(--) I810(0): Virtual size is 800x600 (pitch 1024)
(**) I810(0): Default mode "800x600": 56.3 MHz, 53.7 kHz, 85.1 Hz
(II) I810(0): Modeline "800x600" 56.30 800 832 896 1048 600 601 604 631
+hsync +vsync
(**) I810(0): Default mode "640x480": 36.0 MHz, 43.3 kHz, 85.0 Hz
(II) I810(0): Modeline "640x480" 36.00 640 696 752 832 480 481 484 509
-hsync -vsync
(++) I810(0): DPI set to (100, 100)
...
Fatal server error:
AddScreen/ScreenInit failed for driver 0
...
Me llama la atenci�n este error:
(EE) Unable to open /dev/agpgart (No such device)
pero no se que quiere decir con ello. El dispositivo existe y tiene los
permisos para "root" adecuados (estoy configurando como root).
Lo cierto es que llevo ya tres d�as con ello y estoy en punto muerto,
�alguien me puede proporcionar alguna pista para solucionar esto? Nunca
hab�a tenido tantos problemas para configurar las X en una m�quina.
Un saludo y gracias por la ayuda,
Javier Mora Garc�a mailto:[EMAIL PROTECTED]
Dialsur S.A. http://www.dialsur.es
Departamento de Inform�tica
