Me acabo de comprar una PCMCIA y una PCI Conceptronic. C22C y C22I No hay manera de configurarlas
Identifico correctamente la tarjeta del portatil cardctl ident Socket 0: product info: "Wireless Network CardBus PC Card", "Global", "", "" manfid: 0x0097, 0x8402 La configuro, /etc/pcmcia/conceptronic.conf card "Wireless Network CardBus PC Card" manfid 0x0097, 0x8402 bind "orinoco_cs" si ejecuto /etc/initd/pcmcia restart sólo oigo un pitido :-( y dmesg tiene la siguiente salida: Intel PCIC probe: not found. PCI: Found IRQ 11 for device 00:02.0 PCI: Sharing IRQ 11 with 00:05.0 PCI: Sharing IRQ 11 with 01:00.0 PCI: Found IRQ 11 for device 00:02.1 Yenta IRQ list 06b8, PCI irq11 Socket status: 30000020 Yenta IRQ list 06b8, PCI irq11 Socket status: 30000006 cs: cb_alloc(bus 2): vendor 0x104c, device 0x8400 PCI: Enabling device 02:00.0 (0000 -> 0003) cs: IO port probe 0x0c00-0x0cff: clean. cs: IO port probe 0x0800-0x08ff: clean. cs: IO port probe 0x0100-0x04ff: excluding 0x3b8-0x3df 0x4d0-0x4d7 cs: IO port probe 0x0a00-0x0aff: clean. No me carga el módulo orinoco_cs automáticamente. :-/ Carga sin errores con un modprobe pero igualmente la wireless no se ve o no la sé ver... iwconfig lo no wireless extensions. eth0 no wireless extensions. Salu2, Ramon