tampoco funciona eso,al poner :
insmod -f hamcore.o
me dice que no existe el fichero hamcore.o
aca pongo esa parte del readme
Please examine the haminst script if you have a different distribution.
The driver is split in two. A ham serial driver and core driver.
The core driver must be loaded first since the serial driver depends on it.
The serial driver registers itself as character device
major number 240, minor number 1.
The serial driver takes one argument right now, which is a number to
override the default major number if you need to.
ATTENTION: if the driver compiles but the script just wont work for you.
Here are the bare minimum steps to get your modem to work.
0. log in as root.
1. insmod -f hamcore.o
2. insmod -f ham.o
2a. you can start "hamregistry" at this point if you wish.
3. rm /dev/ham
4. mknod /dev/ham c 240 1 (note "240" is the default, if it does not
work see what /proc/devices says ham's major number is)
5. ln -s /dev/ham /dev/modem
6. start a comm application like minicom and use the modem.
7. see section 3 (International Users) for info on setting the correct
country settings.
Daniel Firma
__________________________________________________________________ Daniel
Marchetti + [EMAIL PROTECTED]
__________________________________________________________________
----- Original Message -----
From: "Sergio Hernandez" <[EMAIL PROTECTED]>
To: "Debianitas" <[email protected]>
Sent: Friday, November 28, 2003 3:56 PM
Subject: Re: instalar driver modem
> Daniel Marchetti escribi�:
> > al intentar instalar el driver para mi modem me sale el siguiente error:
> >
> > d3m:/home/dem/modem/Intel-v92ham-453# make ham
> > Module precompile check
> > Current running kernel is: 2.4.18-bf2.4
> > /lib/modules... autoconf.h does not exist
> > please install kernel source
> > make: *** [check] Error 1
> > d3m:/home/dem/modem/Intel-v92ham-453#
> >
> > -es el mismo driver que usaba en red hat7.2
> > -es para kernel 2.4.x
> > -tengo instaladas las fuentes del kernel y autoconf y auntoconf2.13
>
> En el readme deben haber unas instrucciones alternativas, en caso de que
> el script no ande, como estas:
>
> 0. log in as root.
> 1. insmod -f hamcore.o
> 2. insmod -f ham.o
> 3. rm /dev/ham
> 4. mknod /dev/ham c 240 1
> 5. ln -s /dev/ham /dev/modem
>
> Dale una mirada a eso, yo lo hice as� y funcion� perfectamente con un
> Intel-v92ham-451
>
>
> --
> Sergio Hern�ndez A.
> Linux User #324.172
> --------------------
>
>
> --
> To UNSUBSCRIBE, email to [EMAIL PROTECTED]
> with a subject of "unsubscribe". Trouble? Contact
[EMAIL PROTECTED]
>
