Merhaba, groups komutunun ciktisinda audio var mi ? Yoksa /etc/group dosyasinda audio satirinda :kullaniciadi ekleyebilirsin. Bir baska yolu da denemekte fayda var. chmod 777 /dev/dsp
Ben de de xmms calisiyor, KDE sesleri calisiyor, wine da bile ses var ama Quake3 te yok :( Kolay gelsin... On Thu, 24 Feb 2005 15:13:05 +0000, oguz cavli <[EMAIL PROTECTED]> wrote: > Iyi gunler, > Oldukca ugrastim ama henuz sorunumu cozemedim, yardimlarinizi bekliyorum. > Sorun: Error while initializing the sound driver: > Sonuc: Ses alamiyorum, muzik dinleyemiyorum. > Sistem: Compaq Armada 1750 Labtop, Pentium II, 64mbRAM, Debian Sarge, 2.6.8, > fluxbox > Cabalar: asagida :-)) > ------------------------------------------------------- > > Bilgisayari her actigimda bu hata mesaji ile aciliyor: > -------------------------------------------------------------------------------------------------- > - Informational- artsmessage (ust bar satiri) - > - Sound server informational message: - > - Error while initializing the sound driver: > - > - device /dev/dsp can`t be opened (no such file or directory) - > - The sound server will continue, using the null output device. - > -------------------------------------------------------------------------------------------------- > > http://www.linuxquestions.org/questions/archive/5/2002/11/4/36425 adresinde > bu /dev/dsp dosyasi yoksa: > # mknod /dev/dsp c 14 3 > If the device exists, try to check who is using it with: > # ps aux | grep `fuser /dev/dsp` > ile yaratin kontrol edin diyordu. Verdim komutlari. > ev:/# ls /dev/d* > /dev/dmfm /dev/dsp > Birsey degismedi. > > (0) Kurulumdan sonra makinadan ses gelmiyordu ve lspci ve lspci -v komutlari > hic bir audio device a isaret etmiyordu. Ama ses kartim var ve win98 kurulu > iken calisiyordu. Knoppix 3.7 kernel 2.6 ile actim ne acilista nede X`e > ciktiktan sonra birsey degismedi. lspnp komutunu verince ess sound card gibi > bir satir gordum. Not ettim. > > (1) Ardindan Debian`a gectim, kernel update yaptim ve 2.6.8 yukseldim lakin > birsey degismedi. > > (2) Sonra alsaconfig komutunu verdim ve es modulunu sectim: > ev:/home/janus# alsaconf > Usage: /etc/init.d/alsa {start [CARD]|stop [CARD]|restart [CARD]|force- > unload|force-reload|suspend|resume} > Building card database.. > Probing legacy cards.. This may take a few minutes.. > Probing: es1688 : FOUND!! > Running update-modules... > Loading driver... > Setting default volumes... > ======================================= > Now ALSA is ready to use. > For adjustment of volumes, use your favorite mixer. > Have a lot of fun! > > (3) alsamixer`i calistirdim. evet artik bir ses cardim vardi: :-)) > ESS1688 rev 11 > Burada: Master, PCM, FM, Line, CD, PC Speak, Aux maksimumda > Mic ise minimumda cok acarsam zaten otmeye basliyor, cizirdiyor. Mikrofon > takip konusursamda hoporlorlerden ses geliyor, cubuklarlada sesi azaltip > cogaltabiliyorum. > AOUT`u ise artiramiyorum, kapali gibi, secilmiyor. > Kmix`te artik yanit veriyor (vaktiyle uzerinde carpi vardi) hersey > maksimumda mikrofon haric. > > (4) xmms`i calistirinca: (yeni bir hata cikti) > ---------------------------------------------------------------------------- > - Couldn`t open audio - > - Please check that: - > - Your soundcard is configured properly - > - You have the correct output plugin selected - > - No other program is blocking the soundcard - > ----------------------------------------------------------------------------- > > (5) Bu mesajdan sonra lsmod dedim, snd satirlarininda elvelden hic biri > yoktu, bu iyiye isaret sanirim :--) > ev:/home/janus# lsmod > Module Size Used by > snd_es1688 8136 0 > snd_opl3_lib 9728 1 snd_es1688 > snd_hwdep 9092 1 snd_opl3_lib > snd_es1688_lib 14480 1 snd_es1688 > snd_mpu401_uart 7296 1 snd_es1688 > snd_rawmidi 23204 1 snd_mpu401_uart > snd_seq_device 7944 2 snd_opl3_lib,snd_rawmidi > snd_pcm_oss 48168 0 > snd_mixer_oss 16640 1 snd_pcm_oss > snd_pcm 85384 2 snd_es1688_lib,snd_pcm_oss > snd_page_alloc 11144 1 snd_pcm > snd_timer 23172 2 snd_opl3_lib,snd_pcm > snd 50660 11 > snd_es1688,snd_opl3_lib,snd_hwdep,snd_es1688_lib,snd_mpu401_uart,snd_rawmidi,snd_seq_device,snd_pcm_oss,snd_mixer_oss,snd_pcm,snd_timer > soundcore 9824 1 snd > ipv6 229764 8 > serial_cs 9628 1 > xirc2ps_cs 17424 1 > ds 17796 6 serial_cs,xirc2ps_cs > af_packet 20872 0 > tsdev 7168 0 > mousedev 9996 2 > psmouse 17800 0 > rtc 12088 0 > pcspkr 3816 0 > floppy 54992 0 > irtty_sir 8320 0 > sir_dev 18092 1 irtty_sir > irda 167360 2 irtty_sir,sir_dev > crc_ccitt 2432 1 irda > parport_pc 33348 0 > parport 37320 1 parport_pc > evdev 9088 0 > uhci_hcd 29328 0 > usbcore 104164 3 uhci_hcd > yenta_socket 19200 1 > pcmcia_core 63028 4 serial_cs,xirc2ps_cs,ds,yenta_socket > capability 4872 0 > commoncap 7168 1 capability > ide_cd 38176 0 > cdrom 35740 1 ide_cd > ext3 109672 1 > jbd 54552 1 ext3 > ide_generic 1664 0 > piix 12448 1 > ide_disk 16768 3 > ide_core 125028 4 ide_cd,ide_generic,piix,ide_disk > sd_mod 20480 0 > ata_piix 7812 0 > libata 36228 1 ata_piix > scsi_mod 115148 2 sd_mod,libata > unix 26036 127 > font 8576 0 > vesafb 6688 0 > cfbcopyarea 3840 1 vesafb > cfbimgblt 3200 1 vesafb > cfbfillrect 3712 1 vesafb > > (6) cat /etc/modules.conf diyince su ciktiyi aliyordum: (alakali yerleri > kesip aldim) > ### update-modules: start processing /etc/modutils/alsa-base > # snd module options > options snd device_mode=0660 > # autoloader aliases > alias char-major-116 snd > alias char-major-14 soundcore > alias sound-service-0-0 snd-mixer-oss > alias sound-service-0-1 snd-seq-oss > alias sound-service-0-3 snd-pcm-oss > alias sound-service-0-8 snd-seq-oss > alias sound-service-0-12 snd-pcm-oss > alias sound-slot-0 snd-card-0 > alias sound-slot-1 snd-card-1 > alias sound-slot-2 snd-card-2 > alias sound-slot-3 snd-card-3 > alias sound-slot-4 snd-card-4 > alias sound-slot-5 snd-card-5 > alias sound-slot-6 snd-card-6 > alias sound-slot-7 snd-card-7 > > (7) Ardindan interneti kurcaladim ve ses kartim icin su degerleri girmem > gerektigini ogrendim > modules.conf dosyasina, options bolumune: > options snd snd_major=116 snd_cards_limit=1 snd_device_mode=0660 > snd_device_gid=17 snd_device_uid=0 > options snd-card-es1688 snd_index=1 snd_id=CARD_1 snd_port=0x220 > snd_mpu_port=-1 snd_irq=5 snd_mpu_irq=7 snd_dma8=1 > Ama hic birsey degismedi ve ses alamiyorum. > > (8) xmms`de ctrl+p output`umu degistirebiliyorum: > (http://www.webservertalk.com/message890881.html adresinde bu problemden > bahsediyor) > ALSA, aRts, Disk Writer, eSound, jack, jackasyn, OSS secenekleri var; Disk > Writer Plugin 1.2.10 [libdisk_writer.so] secip play deyince caliyormus gibi, > bar hareket ediyor visualazition bolumu alev alev ama tabi bir yere birsey > yazdirmiyorum :-)) ALSA ve OSS ise bir output hatasi vermiyor ama hic > birseyde olmuyor oyle duruyor. Baska programlarla ile play dedigim zaman ise > bar hareket ediyor ama ses cikmiyor. aRts`yi sectigim zaman ise bazen bar > hareker ediyor bazende konsola aRts sound server baslatilamadi tarzinda bir > mesaj aliyorum. > > (9) Bir baska ilginc konu ise makinami tekrar baslatinca ses kartimi > kaybetmem, ayrica etc/modules.conf dosyamda eski haline geliyor girdigim > optionslar siliniyor. Bunu hic bir sekilde engelleyemedim. Her acilista > yukarida gordugunuz herseyi tekrar yapiyorum, alsaconf, modules.conf, xmms. > output ayarlari vs... > > (10) Asagiya acilis ve etc/modules.conf ciktilarini tamamen ekliyorum... > > (10.1) ev:/# dmesg > Linux version 2.6.8-2-386 ([EMAIL PROTECTED]) (gcc version 3.3.5 > (Debian 1:3.3.5-6)) #1 Mon Jan 24 03:01:58 EST 2005 > BIOS-provided physical RAM map: > BIOS-e820: 0000000000000000 - 000000000009fc00 (usable) > BIOS-e820: 000000000009fc00 - 00000000000a0000 (reserved) > BIOS-e820: 00000000000f0000 - 0000000000100000 (reserved) > BIOS-e820: 0000000000100000 - 0000000003ff8000 (usable) > BIOS-e820: 0000000003ff8000 - 0000000004000000 (ACPI NVS) > 63MB LOWMEM available. > On node 0 totalpages: 16376 > DMA zone: 4096 pages, LIFO batch:1 > Normal zone: 12280 pages, LIFO batch:2 > HighMem zone: 0 pages, LIFO batch:1 > DMI not present. > ACPI: RSDP (v000 COMPAQ ) @ 0x000fa010 > ACPI: RSDT (v001 COMPAQ RSDTBL 0x00000001 CPQ 0x00000001) @ 0x03ff8000 > ACPI: FADT (v001 COMPAQ CPQB05E 0x00000001 CPQ 0x00000001) @ 0x03ff8028 > ACPI: DSDT (v001 COMPAQ ARMADA17 0x00010000 MSFT 0x0100000a) @ 0x00000000 > ACPI: PM-Timer IO Port: 0xf08 > Built 1 zonelists > Kernel command line: root=/dev/hda2 ro > Local APIC disabled by BIOS -- reenabling. > Could not enable APIC! > Initializing CPU#0 > PID hash table entries: 256 (order 8: 2048 bytes) > Detected 266.774 MHz processor. > Using pmtmr for high-res timesource > Console: colour VGA+ 80x25 > Dentry cache hash table entries: 16384 (order: 4, 65536 bytes) > Inode-cache hash table entries: 8192 (order: 3, 32768 bytes) > Memory: 57652k/65504k available (1335k kernel code, 7396k reserved, 733k > data, 204k init, 0k highmem) > Checking if this processor honours the WP bit even in supervisor mode... Ok. > Calibrating delay loop... 526.33 BogoMIPS > Security Scaffold v1.0.0 initialized > Mount-cache hash table entries: 512 (order: 0, 4096 bytes) > CPU: After generic identify, caps: 0183f9ff 00000000 00000000 00000000 > CPU: After vendor identify, caps: 0183f9ff 00000000 00000000 00000000 > CPU: L1 I cache: 16K, L1 D cache: 16K > CPU: L2 cache: 512K > CPU: After all inits, caps: 0183f9ff 00000000 00000000 00000040 > CPU: Intel Pentium II (Deschutes) stepping 02 > Enabling fast FPU save and restore... done. > Checking 'hlt' instruction... OK. > Checking for popad bug... OK. > checking if image is initramfs...it isn't (ungzip failed); looks like an > initrd > Freeing initrd memory: 4288k freed > NET: Registered protocol family 16 > EISA bus registered > PCI: PCI BIOS revision 2.10 entry at 0xf046a, last bus=0 > PCI: Using configuration type 1 > mtrr: v2.0 (20020519) > ACPI: Subsystem revision 20040326 > ACPI: IRQ9 SCI: Edge set to Level Trigger. > ACPI-0165: *** Error: No object was returned from [\_SB_.C0D6._STA] > (Node c3fc6940), AE_NOT_EXIST > ACPI: Interpreter enabled > ACPI: Using PIC for interrupt routing > ACPI: PCI Root Bridge [C000] (00:00) > PCI: Probing PCI hardware (bus 00) > ACPI: PCI Interrupt Routing Table [\_SB_.C000._PRT] > ACPI: PCI Interrupt Link [C0F1] (IRQs *11) > ACPI: PCI Interrupt Link [C0F5] (IRQs *11) > ACPI: Power Resource [C102] (on) > ACPI: Power Resource [C104] (on) > Linux Plug and Play Support v0.97 (c) Adam Belay > PnPBIOS: Scanning system for PnP BIOS support... > PnPBIOS: Found PnP BIOS installation structure at 0xc00fb2a0 > PnPBIOS: PnP BIOS version 1.0, entry 0xf0000:0x49df, dseg 0xf0000 > PnPBIOS: 18 nodes reported by PnP BIOS; 18 recorded by driver > PCI: Using ACPI for IRQ routing > ACPI: PCI Interrupt Link [C0F5] enabled at IRQ 11 > ACPI: PCI interrupt 0000:00:07.2[D] -> GSI 11 (level, low) -> IRQ 11 > ACPI: PCI Interrupt Link [C0F1] enabled at IRQ 11 > ACPI: PCI interrupt 0000:00:11.0[A] -> GSI 11 (level, low) -> IRQ 11 > ACPI: PCI interrupt 0000:00:11.1[A] -> GSI 11 (level, low) -> IRQ 11 > VFS: Disk quotas dquot_6.5.1 > Dquot-cache hash table entries: 1024 (order 0, 4096 bytes) > devfs: 2004-01-31 Richard Gooch ([EMAIL PROTECTED]) > devfs: boot_options: 0x0 > Initializing Cryptographic API > Limiting direct PCI/PCI transfers. > isapnp: Scanning for PnP cards... > isapnp: No Plug & Play device found > Serial: 8250/16550 driver $Revision: 1.90 $ 54 ports, IRQ sharing enabled > ttyS0 at I/O 0x3f8 (irq = 4) is a 16550A > RAMDISK driver initialized: 16 RAM disks of 8192K size 1024 blocksize > serio: i8042 AUX port at 0x60,0x64 irq 12 > serio: i8042 KBD port at 0x60,0x64 irq 1 > input: AT Translated Set 2 keyboard on isa0060/serio0 > EISA: Probing bus 0 at eisa0 > Cannot allocate resource for EISA slot 1 > EISA: Detected 0 cards. > NET: Registered protocol family 2 > IP: routing cache hash table of 512 buckets, 4Kbytes > TCP: Hash tables configured (established 4096 bind 8192) > NET: Registered protocol family 8 > NET: Registered protocol family 20 > ACPI: (supports S0 S3 S4 S4bios S5) > RAMDISK: cramfs filesystem found at block 0 > RAMDISK: Loading 4288 blocks [1 disk] into ram disk... done. > VFS: Mounted root (cramfs filesystem) readonly. > Freeing unused kernel memory: 204k freed > vesafb: probe of vesafb0 failed with error -6 > NET: Registered protocol family 1 > SCSI subsystem initialized > libata version 1.02 loaded. > Uniform Multi-Platform E-IDE driver Revision: 7.00alpha2 > ide: Assuming 33MHz system bus speed for PIO modes; override with idebus=xx > PIIX4: IDE controller at PCI slot 0000:00:07.1 > PIIX4: chipset revision 1 > PIIX4: not 100% native mode: will probe irqs later > ide0: BM-DMA at 0x1020-0x1027, BIOS settings: hda:DMA, hdb:DMA > hda: IBM-DKLA-24320, ATA DISK drive > hdb: TOSHIBA CD-ROM XM-1802B, ATAPI CD/DVD-ROM drive > Using anticipatory io scheduler > ide0 at 0x1f0-0x1f7,0x3f6 on irq 14 > hda: max request size: 128KiB > hda: 8415225 sectors (4308 MB) w/460KiB Cache, CHS=8905/15/63, UDMA(33) > /dev/ide/host0/bus0/target0/lun0: p1 p2 > kjournald starting. Commit interval 5 seconds > EXT3-fs: mounted filesystem with ordered data mode. > Adding 393080k swap on /dev/hda1. Priority:-1 extents:1 > EXT3 FS on hda2, internal journal > hdb: ATAPI 24X CD-ROM drive, 128kB Cache, DMA > Uniform CD-ROM driver Revision: 3.20 > Capability LSM initialized > Linux Kernel Card Services > options: [pci] [cardbus] [pm] > ACPI: PCI interrupt 0000:00:11.0[A] -> GSI 11 (level, low) -> IRQ 11 > Yenta: CardBus bridge found at 0000:00:11.0 [0e11:b047] > Yenta: Using CSCINT to route CSC interrupts to PCI > Yenta: Routing CardBus interrupts to PCI > Yenta TI: socket 0000:00:11.0, mfunc 0x01001c72, devctl 0x64 > Yenta: ISA IRQ mask 0x00b8, PCI irq 11 > Socket status: 30000010 > ACPI: PCI interrupt 0000:00:11.1[A] -> GSI 11 (level, low) -> IRQ 11 > Yenta: CardBus bridge found at 0000:00:11.1 [0e11:b047] > Yenta: Using CSCINT to route CSC interrupts to PCI > Yenta: Routing CardBus interrupts to PCI > Yenta TI: socket 0000:00:11.1, mfunc 0x01001c72, devctl 0x64 > Yenta: ISA IRQ mask 0x00b8, PCI irq 11 > Socket status: 30000006 > usbcore: registered new driver usbfs > usbcore: registered new driver hub > USB Universal Host Controller Interface driver v2.2 > ACPI: PCI interrupt 0000:00:07.2[D] -> GSI 11 (level, low) -> IRQ 11 > uhci_hcd 0000:00:07.2: Intel Corp. 82371AB/EB/MB PIIX4 USB > uhci_hcd 0000:00:07.2: irq 11, io base 00001000 > uhci_hcd 0000:00:07.2: new USB bus registered, assigned bus number 1 > hub 1-0:1.0: USB hub found > hub 1-0:1.0: 2 ports detected > parport: PnPBIOS parport detected. > parport0: PC-style at 0x378, irq 7 [PCSPP,TRISTATE,EPP] > irda_init() > NET: Registered protocol family 23 > inserting floppy driver for 2.6.8-2-386 > Floppy drive(s): fd0 is 1.44M > FDC 0 is a post-1991 82077 > input: PC Speaker > Real Time Clock Driver v1.12 > synaptics reset failed > synaptics reset failed > synaptics reset failed > Unable to query Synaptics hardware. > input: PS/2 Synaptics TouchPad on isa0060/serio1 > mice: PS/2 mouse device common for all mice > ts: Compaq touchscreen protocol output > NET: Registered protocol family 17 > cs: IO port probe 0x0100-0x04ff: excluding 0x220-0x22f 0x250-0x257 > 0x310-0x317 0x4d0-0x4d7 > cs: IO port probe 0x0800-0x08ff: clean. > cs: IO port probe 0x0c00-0x0cff: clean. > cs: IO port probe 0x0a00-0x0aff: clean. > cs: memory probe 0xa0000000-0xa0ffffff: clean. > NET: Registered protocol family 10 > Disabled Privacy Extensions on device c02cc840(lo) > IPv6 over IPv4 tunneling driver > eth%d: autonegotiation failed; using 10mbs > eth%d: MII selected > eth%d: media 10BaseT, silicon revision 5 > eth0: Xircom: port 0x300, irq 3, hwaddr 00:10:A4:F5:66:E3 > ttyS3 at I/O 0x2e8 (irq = 3) is a 16550A > eth0: autonegotiation failed; using 10mbs > eth0: MII selected > eth0: media 10BaseT, silicon revision 5 > eth0: no IPv6 routers present > psmouse.c: TouchPad at isa0060/serio1/input0 lost synchronization, throwing > 1 bytes away. > > (10.2) ev:/home/janus# cat /etc/modules.conf > ### This file is automatically generated by update-modules" > # > # Please do not edit this file directly. If you want to change or add > # anything please take a look at the files in /etc/modutils and read > # the manpage for update-modules. > # > ### update-modules: start processing /etc/modutils/0keep > # DO NOT MODIFY THIS FILE! > # This file is not marked as conffile to make sure if you upgrade modutils > # it will be restored in case some modifications have been made. > # > # The keep command is necessary to prevent insmod and friends from ignoring > # the builtin defaults of a path-statement is encountered. Until all other > # packages use the new `add path'-statement this keep-statement is essential > # to keep your system working > keep > > ### update-modules: end processing /etc/modutils/0keep > > ### update-modules: start processing /etc/modutils/actions > # Special actions that are needed for some modules > > # The BTTV module does not load the tuner module automatically, > # so do that in here > post-install bttv insmod tuner > post-remove bttv rmmod tuner > > ### update-modules: end processing /etc/modutils/actions > > ### update-modules: start processing /etc/modutils/aliases > # Aliases to tell insmod/modprobe which modules to use > > # Uncomment the network protocols you don't want loaded: > # alias net-pf-1 off # Unix > # alias net-pf-2 off # IPv4 > # alias net-pf-3 off # Amateur Radio AX.25 > # alias net-pf-4 off # IPX > # alias net-pf-5 off # DDP / appletalk > # alias net-pf-6 off # Amateur Radio NET/ROM > # alias net-pf-9 off # X.25 > # alias net-pf-10 off # IPv6 > # alias net-pf-11 off # ROSE / Amateur Radio X.25 PLP > # alias net-pf-19 off # Acorn Econet > alias net-pf-24 pppoe > > alias char-major-10-175 agpgart > alias char-major-10-200 tun > alias char-major-81 bttv > alias char-major-108 ppp_generic > alias /dev/ppp ppp_generic > alias tty-ldisc-3 ppp_async > alias tty-ldisc-14 ppp_synctty > alias ppp-compress-21 bsd_comp > alias ppp-compress-24 ppp_deflate > alias ppp-compress-26 ppp_deflate > > # Crypto modules (see http://www.kerneli.org/) > alias loop-xfer-gen-0 loop_gen > alias loop-xfer-3 loop_fish2 > alias loop-xfer-gen-10 loop_gen > alias cipher-2 des > alias cipher-3 fish2 > alias cipher-4 blowfish > alias cipher-6 idea > alias cipher-7 serp6f > alias cipher-8 mars6 > alias cipher-11 rc62 > alias cipher-15 dfc2 > alias cipher-16 rijndael > alias cipher-17 rc5 > > ### update-modules: end processing /etc/modutils/aliases > > ### update-modules: start processing /etc/modutils/alsa-base > # snd module options > options snd snd_major=116 snd_cards_limit=1 snd_device_mode=0660 > snd_device_gid=17 snd_device_uid=0 > options snd-card-es1688 snd_index=1 snd_id=CARD_1 snd_port=0x220 > snd_mpu_port=-1 snd_irq=5 snd_mpu_irq=7 snd_dma8=1 > # autoloader aliases > alias char-major-116 snd > alias char-major-14 soundcore > alias sound-service-0-0 snd-mixer-oss > alias sound-service-0-1 snd-seq-oss > alias sound-service-0-3 snd-pcm-oss > alias sound-service-0-8 snd-seq-oss > alias sound-service-0-12 snd-pcm-oss > alias sound-slot-0 snd-card-0 > alias sound-slot-1 snd-card-1 > alias sound-slot-2 snd-card-2 > alias sound-slot-3 snd-card-3 > alias sound-slot-4 snd-card-4 > alias sound-slot-5 snd-card-5 > alias sound-slot-6 snd-card-6 > alias sound-slot-7 snd-card-7 > # Load optional modules above their base modules > above snd-pcm snd-pcm-oss > above snd-mixer snd-mixer-oss > above snd-seq snd-seq-oss snd-seq-midi > # Cause a script to be run after snd-emu8000-synth module initialization > post-install snd-emu8000-synth /lib/alsa/modprobe-post-install > snd-emu8000-synth > # Cause a script to be run after card driver module initialization > post-install snd-ad1816a /lib/alsa/modprobe-post-install snd-ad1816a > post-install snd-ad1848 /lib/alsa/modprobe-post-install snd-ad1848 > post-install snd-ali5451 /lib/alsa/modprobe-post-install snd-ali5451 > post-install snd-als100 /lib/alsa/modprobe-post-install snd-als100 > post-install snd-als4000 /lib/alsa/modprobe-post-install snd-als4000 > post-install snd-asihpi /lib/alsa/modprobe-post-install snd-asihpi > post-install snd-atiixp /lib/alsa/modprobe-post-install snd-atiixp > post-install snd-au8810 /lib/alsa/modprobe-post-install snd-au8810 > post-install snd-au8820 /lib/alsa/modprobe-post-install snd-au8820 > post-install snd-au8830 /lib/alsa/modprobe-post-install snd-au8830 > post-install snd-azt2320 /lib/alsa/modprobe-post-install snd-azt2320 > post-install snd-azt3328 /lib/alsa/modprobe-post-install snd-azt3328 > post-install snd-azx /lib/alsa/modprobe-post-install snd-azx > post-install snd-ca0106 /lib/alsa/modprobe-post-install snd-ca0106 > post-install snd-cmi8330 /lib/alsa/modprobe-post-install snd-cmi8330 > post-install snd-cmipci /lib/alsa/modprobe-post-install snd-cmipci > post-install snd-cs4231 /lib/alsa/modprobe-post-install snd-cs4231 > post-install snd-cs4232 /lib/alsa/modprobe-post-install snd-cs4232 > post-install snd-cs4236 /lib/alsa/modprobe-post-install snd-cs4236 > post-install snd-cs4281 /lib/alsa/modprobe-post-install snd-cs4281 > post-install snd-cs46xx /lib/alsa/modprobe-post-install snd-cs46xx > post-install snd-darla20 /lib/alsa/modprobe-post-install snd-darla20 > post-install snd-darla24 /lib/alsa/modprobe-post-install snd-darla24 > post-install snd-dt019x /lib/alsa/modprobe-post-install snd-dt019x > post-install snd-emu10k1 /lib/alsa/modprobe-post-install snd-emu10k1 > post-install snd-emu10k1x /lib/alsa/modprobe-post-install snd-emu10k1x > post-install snd-ens1370 /lib/alsa/modprobe-post-install snd-ens1370 > post-install snd-ens1371 /lib/alsa/modprobe-post-install snd-ens1371 > post-install snd-es1688 /lib/alsa/modprobe-post-install snd-es1688 > post-install snd-es18xx /lib/alsa/modprobe-post-install snd-es18xx > post-install snd-es1938 /lib/alsa/modprobe-post-install snd-es1938 > post-install snd-es1968 /lib/alsa/modprobe-post-install snd-es1968 > post-install snd-es968 /lib/alsa/modprobe-post-install snd-es968 > post-install snd-fm801 /lib/alsa/modprobe-post-install snd-fm801 > post-install snd-gina20 /lib/alsa/modprobe-post-install snd-gina20 > post-install snd-gina24 /lib/alsa/modprobe-post-install snd-gina24 > post-install snd-gina3g /lib/alsa/modprobe-post-install snd-gina3g > post-install snd-gusclassic /lib/alsa/modprobe-post-install snd-gusclassic > post-install snd-gusextreme /lib/alsa/modprobe-post-install snd-gusextreme > post-install snd-gusmax /lib/alsa/modprobe-post-install snd-gusmax > post-install snd-harmony /lib/alsa/modprobe-post-install snd-harmony > post-install snd-hdsp /lib/alsa/modprobe-post-install snd-hdsp > post-install snd-hdspm /lib/alsa/modprobe-post-install snd-hdspm > post-install snd-ice1712 /lib/alsa/modprobe-post-install snd-ice1712 > post-install snd-ice1724 /lib/alsa/modprobe-post-install snd-ice1724 > post-install snd-indigo /lib/alsa/modprobe-post-install snd-indigo > post-install snd-indigodj /lib/alsa/modprobe-post-install snd-indigodj > post-install snd-indigoio /lib/alsa/modprobe-post-install snd-indigoio > post-install snd-intel8x0 /lib/alsa/modprobe-post-install snd-intel8x0 > post-install snd-interwave /lib/alsa/modprobe-post-install snd-interwave > post-install snd-interwave-stb /lib/alsa/modprobe-post-install > snd-interwave-stb > post-install snd-korg1212 /lib/alsa/modprobe-post-install snd-korg1212 > post-install snd-layla20 /lib/alsa/modprobe-post-install snd-layla20 > post-install snd-layla24 /lib/alsa/modprobe-post-install snd-layla24 > post-install snd-layla3g /lib/alsa/modprobe-post-install snd-layla3g > post-install snd-maestro3 /lib/alsa/modprobe-post-install snd-maestro3 > post-install snd-mia /lib/alsa/modprobe-post-install snd-mia > post-install snd-mixart /lib/alsa/modprobe-post-install snd-mixart > post-install snd-mona /lib/alsa/modprobe-post-install snd-mona > post-install snd-mpu401 /lib/alsa/modprobe-post-install snd-mpu401 > post-install snd-msnd-pinnacle /lib/alsa/modprobe-post-install > snd-msnd-pinnacle > post-install snd-mtpav /lib/alsa/modprobe-post-install snd-mtpav > post-install snd-nm256 /lib/alsa/modprobe-post-install snd-nm256 > post-install snd-opl3sa2 /lib/alsa/modprobe-post-install snd-opl3sa2 > post-install snd-opti92x-ad1848 /lib/alsa/modprobe-post-install > snd-opti92x-ad1848 > post-install snd-opti92x-cs4231 /lib/alsa/modprobe-post-install > snd-opti92x-cs4231 > post-install snd-opti93x /lib/alsa/modprobe-post-install snd-opti93x > post-install snd-pc98-cs4232 /lib/alsa/modprobe-post-install snd-pc98-cs4232 > post-install snd-pcxhr /lib/alsa/modprobe-post-install snd-pcxhr > post-install snd-pdaudiocf /lib/alsa/modprobe-post-install snd-pdaudiocf > post-install snd-pdplus /lib/alsa/modprobe-post-install snd-pdplus > post-install snd-portman2x4 /lib/alsa/modprobe-post-install snd-portman2x4 > post-install snd-powermac /lib/alsa/modprobe-post-install snd-powermac > post-install snd-rme32 /lib/alsa/modprobe-post-install snd-rme32 > post-install snd-rme96 /lib/alsa/modprobe-post-install snd-rme96 > post-install snd-rme9652 /lib/alsa/modprobe-post-install snd-rme9652 > post-install snd-sa11xx-uda1341 /lib/alsa/modprobe-post-install > snd-sa11xx-uda1341 > post-install snd-sb16 /lib/alsa/modprobe-post-install snd-sb16 > post-install snd-sb8 /lib/alsa/modprobe-post-install snd-sb8 > post-install snd-sbawe /lib/alsa/modprobe-post-install snd-sbawe > post-install snd-serialmidi /lib/alsa/modprobe-post-install snd-serialmidi > post-install snd-serial-u16550 /lib/alsa/modprobe-post-install > snd-serial-u16550 > post-install snd-sgalaxy /lib/alsa/modprobe-post-install snd-sgalaxy > post-install snd-sonicvibes /lib/alsa/modprobe-post-install snd-sonicvibes > post-install snd-sscape /lib/alsa/modprobe-post-install snd-sscape > post-install snd-sun-amd7930 /lib/alsa/modprobe-post-install snd-sun-amd7930 > post-install snd-sun-cs4231 /lib/alsa/modprobe-post-install snd-sun-cs4231 > post-install snd-sun-dbri /lib/alsa/modprobe-post-install snd-sun-dbri > post-install snd-trident /lib/alsa/modprobe-post-install snd-trident > post-install snd-usb-audio /lib/alsa/modprobe-post-install snd-usb-audio > post-install snd-usb-usx2y /lib/alsa/modprobe-post-install snd-usb-usx2y > post-install snd-via82xx /lib/alsa/modprobe-post-install snd-via82xx > post-install snd-vx222 /lib/alsa/modprobe-post-install snd-vx222 > post-install snd-vxp440 /lib/alsa/modprobe-post-install snd-vxp440 > post-install snd-vxpocket /lib/alsa/modprobe-post-install snd-vxpocket > post-install snd-wavefront /lib/alsa/modprobe-post-install snd-wavefront > post-install snd-ymfpci /lib/alsa/modprobe-post-install snd-ymfpci > # Prevent abnormal drivers from grabbing index 0 > options snd-atiixp-modem index=-2 > options snd-bt87x index=-2 > options snd-intel8x0m index=-2 > options snd-via82xx-modem index=-2 > > ### update-modules: end processing /etc/modutils/alsa-base > > ### update-modules: start processing /etc/modutils/apm > alias char-major-10-134 apm > alias /dev/apm_bios /dev/misc/apm_bios > alias /dev/misc/apm_bios apm > > ### update-modules: end processing /etc/modutils/apm > > ### update-modules: start processing /etc/modutils/paths > # This file contains a list of paths that modprobe should scan, > # beside the ones that are compiled into the modutils tools > # themselves. > > ### update-modules: end processing /etc/modutils/paths > > ### update-modules: start processing /etc/modutils/arch/i386 > alias parport_lowlevel parport_pc > alias char-major-10-144 nvram > alias binfmt-0064 binfmt_aout > alias char-major-10-135 rtc > > ### update-modules: end processing /etc/modutils/arch/i386 > > ev:/home/janus# > > _________________________________________________________________ > Sadece sohbet ile yetinmeyin - eglneceye de doymak için Messenger'i tercih > edin! http://messenger.msn.com/?mkt=tr&DI=3490&XAPID=2584 > > -- > To UNSUBSCRIBE, email to [EMAIL PROTECTED] > with a subject of "unsubscribe". Trouble? Contact [EMAIL PROTECTED] > >