Sorun çözülmüştür, Daldım debian dünyasına :) Nasıl çözüldü meb toshibasına debian sarge kurma problemi??? İşte Mehmet Ali Aksoy Hoca'nın bu mesajındaki bu link ile:
Çözüm Adresi :) http://www.fazlamesai.net/modules.php?name=News&file=article&sid=2961 Mehmet Ali Aksoy'a ve ilgilenen herkese çok teşekkür ederim. Hamza Hamzaoğlu Linux Addict On 7/7/05, hamza hamzaoğlu <[EMAIL PROTECTED]> wrote: > lspci lsusb ve dmesg ekledim; yardimlarinizi bekliyorum, > sisteme takili ek aygit yok. > > [EMAIL PROTECTED] lspci > 00:00.0 Host bridge: Intel Corp.: Unknown device 3580 (rev 02) > 00:00.1 System peripheral: Intel Corp.: Unknown device 3584 (rev 02) > 00:00.3 System peripheral: Intel Corp.: Unknown device 3585 (rev 02) > 00:02.0 VGA compatible controller: Intel Corp.: Unknown device 3582 (rev 02) > 00:02.1 Display controller: Intel Corp.: Unknown device 3582 (rev 02) > 00:1d.0 USB Controller: Intel Corp. 82801DB USB (Hub #1) (rev 03) > 00:1d.1 USB Controller: Intel Corp. 82801DB USB (Hub #2) (rev 03) > 00:1d.7 USB Controller: Intel Corp. 82801DB USB EHCI Controller (rev 03) > 00:1e.0 PCI bridge: Intel Corp. 82801BAM/CAM PCI Bridge (rev 83) > 00:1f.0 ISA bridge: Intel Corp.: Unknown device 24cc (rev 03) > 00:1f.1 IDE interface: Intel Corp.: Unknown device 24ca (rev 03) > 00:1f.3 SMBus: Intel Corp. 82801DB SMBus (rev 03) > 00:1f.5 Multimedia audio controller: Intel Corp. 82801DB AC'97 Audio (rev 03) > 00:1f.6 Modem: Intel Corp. 82801DB AC'97 Modem (rev 03) > 02:01.0 CardBus bridge: Texas Instruments PCI1410 PC card Cardbus > Controller (rev 02) > 02:02.0 Ethernet controller: Realtek Semiconductor Co., Ltd. > RTL-8139/8139C/8139C+ (rev 10) > 02:04.0 Network controller: Intel Corp.: Unknown device 4220 (rev 05) > > > [EMAIL PROTECTED] lsusb > Bus 002 Device 001: ID 0000:0000 > Bus 002 Device 002: ID 04b4:0001 Cypress Semiconductor Corp. Mouse > Bus 001 Device 001: ID 0000:0000 > > > > [EMAIL PROTECTED] dmesg > Linux version 2.4.20-xfs ([EMAIL PROTECTED]) (gcc version 2.95.4 20011002 > (Debian prerelease)) #1 SMP Mit Mär 26 15:37:36 CET 2003 > BIOS-provided physical RAM map: > BIOS-e820: 0000000000000000 - 000000000009f800 (usable) > BIOS-e820: 000000000009f800 - 00000000000a0000 (reserved) > BIOS-e820: 00000000000ce000 - 00000000000d0000 (reserved) > BIOS-e820: 00000000000dc000 - 0000000000100000 (reserved) > BIOS-e820: 0000000000100000 - 000000001dee0000 (usable) > BIOS-e820: 000000001dee0000 - 000000001deec000 (ACPI data) > BIOS-e820: 000000001deec000 - 000000001df00000 (ACPI NVS) > BIOS-e820: 000000001df00000 - 0000000020000000 (reserved) > BIOS-e820: 00000000fec10000 - 00000000fec20000 (reserved) > BIOS-e820: 00000000ff800000 - 00000000ffc00000 (reserved) > BIOS-e820: 00000000fffffc00 - 0000000100000000 (reserved) > 478MB LOWMEM available. > On node 0 totalpages: 122592 > zone(0): 4096 pages. > zone(1): 118496 pages. > zone(2): 0 pages. > Kernel command line: ramdisk_size=100000 init=/etc/init lang=us > apm=power-off hda=scsi hdb=scsi hdc=scsi hdd=scsi hde=scsi hdf=scsi > hdg=scsi hdh=scsi vga=791 initrd=miniroot.gz nomce quiet > BOOT_IMAGE=knoppix BOOT_IMAGE=vmlinuz > ide_setup: hda=scsi > ide_setup: hdb=scsi > ide_setup: hdc=scsi > ide_setup: hdd=scsi > ide_setup: hde=scsi > ide_setup: hdf=scsi > ide_setup: hdg=scsi > ide_setup: hdh=scsi > Local APIC disabled by BIOS -- reenabling. > Found and enabled local APIC! > Initializing CPU#0 > Detected 1594.857 MHz processor. > Console: colour dummy device 80x25 > Calibrating delay loop... 3185.04 BogoMIPS > Memory: 481868k/490368k available (1270k kernel code, 8112k reserved, > 503k data, 128k init, 0k highmem) > Dentry cache hash table entries: 65536 (order: 7, 524288 bytes) > Inode cache hash table entries: 32768 (order: 6, 262144 bytes) > Mount-cache hash table entries: 8192 (order: 4, 65536 bytes) > Buffer-cache hash table entries: 32768 (order: 5, 131072 bytes) > Page-cache hash table entries: 131072 (order: 7, 524288 bytes) > CPU: After generic, caps: afe9fbbf 00000000 00000000 00000000 > CPU: Common caps: afe9fbbf 00000000 00000000 00000000 > Enabling fast FPU save and restore... done. > Enabling unmasked SIMD FPU exception support... done. > Checking 'hlt' instruction... OK. > Checking for popad bug... OK. > POSIX conformance testing by UNIFIX > mtrr: v1.40 (20010327) Richard Gooch ([EMAIL PROTECTED]) > mtrr: detected mtrr type: Intel > CPU: After generic, caps: afe9fbbf 00000000 00000000 00000000 > CPU: Common caps: afe9fbbf 00000000 00000000 00000000 > CPU0: Intel(R) Pentium(R) M processor 1.60GHz stepping 06 > per-CPU timeslice cutoff: 0.00 usecs. > SMP motherboard not detected. > enabled ExtINT on CPU#0 > ESR value before enabling vector: 00000000 > ESR value after enabling vector: 00000000 > Using local APIC timer interrupts. > calibrating APIC timer ... > ..... CPU clock speed is 1594.7715 MHz. > ..... host bus clock speed is 99.6732 MHz. > cpu: 0, clocks: 996732, slice: 498366 > CPU0<T0:996720,T1:498352,D:2,S:498366,C:996732> > Waiting on wait_init_idle (map = 0x0) > All processors have done init_idle > PCI: PCI BIOS revision 2.10 entry at 0xfd789, last bus=2 > PCI: Using configuration type 1 > PCI: Probing PCI hardware > Transparent bridge - Intel Corp. 82801BAM/CAM PCI Bridge > PCI: Using IRQ router PIIX [8086/24cc] at 00:1f.0 > isapnp: Scanning for PnP cards... > isapnp: No Plug & Play device found > Linux NET4.0 for Linux 2.4 > Based upon Swansea University Computer Society NET3.039 > Initializing RT netlink socket > Starting kswapd > VFS: Disk quotas vdquot_6.5.1 > vesafb: framebuffer at 0xe8000000, mapped to 0xde80d000, size 32576k > vesafb: mode is 1024x768x16, linelength=2048, pages=20 > vesafb: protected mode interface info at a5f3:1f5f > vesafb: scrolling: redraw > vesafb: directcolor: size=0:5:6:5, shift=0:11:5:0 > Console: switching to colour frame buffer device 128x48 > fb0: VESA VGA frame buffer device > pty: 256 Unix98 ptys configured > Uniform Multi-Platform E-IDE driver Revision: 6.31 > ide: Assuming 33MHz system bus speed for PIO modes; override with idebus=xx > PCI_IDE: unknown IDE controller on PCI bus 00 device f9, VID=8086, DID=24ca > PCI: Device 00:1f.1 not available because of resource collisions > PCI: Assigned IRQ 6 for device 00:1f.1 > PCI_IDE: BIOS setup was incomplete. > PCI_IDE: chipset revision 3 > PCI_IDE: not 100% native mode: will probe irqs later > ide0: BM-DMA at 0x1810-0x1817, BIOS settings: hda:DMA, hdb:pio > ide1: BM-DMA at 0x1818-0x181f, BIOS settings: hdc:DMA, hdd:pio > hda: TOSHIBA MK4025GAS, ATA DISK drive > hdc: UJDA760 DVD/CDRW, ATAPI CD/DVD-ROM drive > ide0 at 0x1f0-0x1f7,0x3f6 on irq 14 > ide1 at 0x170-0x177,0x376 on irq 15 > hda: 78140160 sectors (40008 MB), CHS=4864/255/63 > ide-cd: passing drive hdc to ide-scsi emulation. > Partition check: > hda: hda1 hda2 < hda5 hda6 hda7 > > floppy0: no floppy controllers found > RAMDISK driver initialized: 16 RAM disks of 100000K size 1024 blocksize > Cronyx Ltd, Synchronous PPP and CISCO HDLC (c) 1994 > Linux port (c) 1998 Building Number Three Ltd & Jan "Yenya" Kasprzak. > Promise Fasttrak(tm) Softwareraid driver 0.03beta: No raid array found > Highpoint HPT370 Softwareraid driver for linux version 0.01 > No raid array found > SCSI subsystem driver Revision: 1.00 > scsi0 : SCSI host adapter emulation for IDE ATAPI devices > Vendor: MATSHITA Model: UJDA760 DVD/CDRW Rev: 1.51 > Type: CD-ROM ANSI SCSI revision: 02 > Attached scsi CD-ROM sr0 at scsi0, channel 0, id 0, lun 0 > sr0: scsi3-mmc drive: 24x/24x writer cd/rw xa/form2 cdda tray > Uniform CD-ROM driver Revision: 3.12 > NET4: Linux TCP/IP 1.0 for NET4.0 > IP Protocols: ICMP, UDP, TCP, IGMP > IP: routing cache hash table of 4096 buckets, 32Kbytes > TCP: Hash tables configured (established 32768 bind 32768) > NET4: Unix domain sockets 1.0/SMP for Linux NET4.0. > RAMDISK: Compressed image found at block 0 > Freeing initrd memory: 464k freed > EXT2-fs warning: checktime reached, running e2fsck is recommended > VFS: Mounted root (ext2 filesystem). > NCR53c406a: no available ports found > aec671x_detect: > scsi: <fdomain> Detection failed (no card) > megaraid: v1.18 (Release Date: Thu Oct 11 15:02:53 EDT 2001) > megaraid: no BIOS enabled. > DC390: 0 adapters found > Failed initialization of WD-7000 SCSI card! > ISO 9660 Extensions: Microsoft Joliet Level 3 > kmod: failed to exec /sbin/modprobe -s -k nls_iso8859-1, errno = 2 > kmod: failed to exec /sbin/modprobe -s -k nls_iso8859-1, errno = 2 > ISO 9660 Extensions: RRIP_1991A > cloop: Welcome to cloop v0.68 > cloop: /cdrom/KNOPPIX/KNOPPIX: 28868 blocks, 65536 bytes/block, > largest block is 65562 bytes. > cloop: loaded (max 1 devices) > ISO 9660 Extensions: RRIP_1991A > Freeing unused kernel memory: 128k freed > Real Time Clock Driver v1.10e > apm: BIOS not found. > Linux Kernel Card Services 3.1.22 > options: [pci] [cardbus] [pm] > PCI: Found IRQ 10 for device 02:01.0 > Yenta IRQ list 0ab8, PCI irq10 > Socket status: 30000006 > cs: IO port probe 0x0c00-0x0cff: clean. > cs: IO port probe 0x0820-0x08ff: clean. > cs: IO port probe 0x0800-0x080f: clean. > cs: IO port probe 0x0100-0x04ff: excluding 0x4d0-0x4d7 > cs: IO port probe 0x0a00-0x0aff: clean. > usb.c: registered new driver usbdevfs > usb.c: registered new driver hub > usb-uhci.c: $Revision: 1.275 $ time 15:50:01 Mar 26 2003 > usb-uhci.c: High bandwidth mode enabled > PCI: Found IRQ 6 for device 00:1d.0 > PCI: Sharing IRQ 6 with 00:02.0 > PCI: Setting latency timer of device 00:1d.0 to 64 > usb-uhci.c: USB UHCI at I/O 0x1820, IRQ 6 > usb-uhci.c: Detected 2 ports > usb.c: new USB bus registered, assigned bus number 1 > hub.c: USB hub found > hub.c: 2 ports detected > PCI: Found IRQ 6 for device 00:1d.1 > PCI: Sharing IRQ 6 with 02:02.0 > PCI: Setting latency timer of device 00:1d.1 to 64 > usb-uhci.c: USB UHCI at I/O 0x1840, IRQ 6 > usb-uhci.c: Detected 2 ports > usb.c: new USB bus registered, assigned bus number 2 > hub.c: USB hub found > hub.c: 2 ports detected > usb-uhci.c: v1.275:USB Universal Host Controller Interface driver > usbdevfs: remount parameter error > hub.c: new USB device 00:1d.1-2, assigned address 2 > usb.c: USB device 2 (vend/prod 0x4b4/0x1) is not claimed by any active driver. > usb.c: registered new driver usb_mouse > Serial driver version 5.05c (2001-07-08) with MANY_PORTS SHARE_IRQ > SERIAL_PCI ISAPNP enabled > PCI: Found IRQ 10 for device 00:1f.6 > PCI: Sharing IRQ 10 with 00:1f.3 > PCI: Sharing IRQ 10 with 00:1f.5 > PCI: Sharing IRQ 10 with 02:04.0 > input0: 4D Mouse USB Mouse on usb2:2.0 > usbmouse.c: v1.6:USB HID Boot Protocol mouse driver > usb.c: registered new driver hiddev > usb.c: registered new driver hid > hid-core.c: v1.8.1 Andreas Gal, Vojtech Pavlik <[EMAIL PROTECTED]> > hid-core.c: USB HID support drivers > mice: PS/2 mouse device common for all mice > i810_rng: cannot disable RNG, aborting > i810_rng hardware driver 0.9.8 loaded > 8139too Fast Ethernet driver 0.9.26 > PCI: Found IRQ 6 for device 02:02.0 > PCI: Sharing IRQ 6 with 00:1d.1 > eth0: RealTek RTL8139 Fast Ethernet at 0xe083f000, 00:c0:9f:8b:f7:a2, IRQ 6 > eth0: Identified 8139 chip type 'RTL-8139C' > Intel 810 + AC97 Audio, version 0.21, 15:49:30 Mar 26 2003 > PCI: Found IRQ 10 for device 00:1f.5 > PCI: Sharing IRQ 10 with 00:1f.3 > PCI: Sharing IRQ 10 with 00:1f.6 > PCI: Sharing IRQ 10 with 02:04.0 > PCI: Setting latency timer of device 00:1f.5 to 64 > i810: Intel ICH4 found at IO 0x1880 and 0x1c00, IRQ 10 > i810_audio: Audio Controller supports 6 channels. > ac97_codec: AC97 Modem codec, id: CXT48(Unknown) > i810_audio: codec 0 is a softmodem - skipping. > Journalled Block Device driver loaded > EXT3-fs: INFO: recovery required on readonly filesystem. > EXT3-fs: write access will be enabled during recovery. > (recovery.c, 254): journal_recover: JBD: recovery, exit status 0, > recovered transactions 2250 to 2345 > (recovery.c, 256): journal_recover: JBD: Replayed 706 and revoked 17/20 blocks > kjournald starting. Commit interval 5 seconds > EXT3-fs: recovery complete. > EXT3-fs: mounted filesystem with ordered data mode. > Adding Swap: 618460k swap-space (priority -1) > eth0: Setting 100mbps full-duplex based on auto-negotiated partner ability > 45e1. > eth0: Setting 100mbps full-duplex based on auto-negotiated partner ability > 45e1. > [drm:drm_init] *ERROR* Cannot initialize the agpgart module. > apm: BIOS not found. > Linux agpgart interface v0.99 (c) Jeff Hartmann > agpgart: Maximum main memory to use for agp memory: 408M > agpgart: no supported devices found. > kjournald starting. Commit interval 5 seconds > EXT3-fs: mounted filesystem with ordered data mode. > apm: BIOS not found. > [EMAIL PROTECTED] > On 7/7/05, hamza hamzaoğlu <[EMAIL PROTECTED]> wrote: > > Herkese selam, > > Debian sarge 2 dvd stable sürümden kurlumu başlattım ve bitirdim. > > temel kurulumu yaptıktan sonra ilk açılışta aldığım ilk hata mesajı bu: > > > > /etc/rcS.d/S36discover: line 204: 1448 Segmentation fault modprobe $MODULE > > loading uhci-hcd module > > <6>usbcore: registered new driver usbfs > > usbcore: registered new driver hub > > USB Universal Host Controller Interface driver v2.2 > > > > Debiana hoşgeldinize ulaşabilmek için grub parametrelerini editleyerek > > /probe/usb=false dedim ve bu hatayı geçtim. > > > > Ardından da şu hata mesajını aldım: > > Running 0dns-down to make sure resolv.conf is ok... done > > Setting up networking... done > > Starting hotplug subsystem > > pci > > <6>Linux agpgart interface v0.100 (c) Dave Jones > > > > burada durdu kaldı. > > > > Bu listede aynı laptopun pil durumu ile ilgili bir tartışma gördüm. > > Milli Eğt. Bak. toshiba laptop için bir sarge kurulum belgesi > > hazırlayan ya da buradan yardım etmek isteyen varsa bilsin ki yardım > > bekleyen bisürü insan var debian dünyasına dalmak isteyen. Yardımlar > > için, > > > > Şimdiden teşekkürler.. > > >
