Leszek Gerwatowski wrote: > Maybe someone tried to use slattach with leased lines? I tried it for > many hours without effect. I run slattach, configure interface with > ifconfig and route, and then i can ping to the other side and i see > packets on my modem - modem on the other side receives my packets but > without any response from system. This same thing is from my side (i see > packets sent by other side but my system makes no response). I'm very > tired with exercises so if anyone knows what's going on i'll be very > grateful!!
I'm using something like this: 1. slattach -p cslip -s 38400 /dev/ttyS2 2. ifconfig sl0 <ip_addr_local> pointopoint <ip_addr_remote> 3. route add <ip_addr_remote> sl0 4. and maybe: route add default gw <ip_addr_remote> If you don't use a modem you should also add the -L option (disables carrier watching). Peter -- Peter Tobias EMail: Fachhochschule Ostfriesland [EMAIL PROTECTED] Fachbereich Elektrotechnik und Informatik [EMAIL PROTECTED] Constantiaplatz 4, 26723 Emden, Germany
