Hello, please configure your mailer to wrap lines below 80 characters per line. 72 to 75 is usually OK.
Thank you. On 08.05.09 17:33, NFN Smith wrote: > I'm upgrading ClamAV from 0.94 to 0.95 from the etch-volatile repository, > and having a couple of problems with getting everything configured > correctly for clamav-milter. > > This box is running Debian Etch and sendmail 8.13.8-3. > > One problem that I'm having: In the underlying rework of code, where > command-line parameters for clamav-milter have been reduced to just three > (help, version and location of alternate config file), I'm having problems > with the startup script in /etc/init.d/clamav-milter. Specifically, when > I try to start clamav-milter, I get an error complaining that > specification of --pidfile is not recognized. > > I can hack the script to take out the specification of the pidfile, and > then clamav-milter starts OK, but it's odd to me that the script would be > using a parameter that is deprecated. This is just a bug of current clamav-milter startup script, and you can safely ignore that message. > Is this something that's peculiar to the implementation in volatile? And > is there a better work-around than just hacking the script? Unless you have other problem, this is not an issue, milter works correctly. -- Matus UHLAR - fantomas, [email protected] ; http://www.fantomas.sk/ Warning: I wish NOT to receive e-mail advertising to this address. Varovanie: na tuto adresu chcem NEDOSTAVAT akukolvek reklamnu postu. "To Boot or not to Boot, that's the question." [WD1270 Caviar] -- To UNSUBSCRIBE, email to [email protected] with a subject of "unsubscribe". Trouble? Contact [email protected]
